Annealing Rifle Brass Ammunition Casings
Wauwatosa, Wisconsin --(AmmoLand.com)- After several firings your brass may start to become brittle and drastically shorten your case life.
Annealing your cases will soften the case and prevent brittle brass.
In this video ammosmith.com demonstrates the annealing process using tools found around the house. By chucking a 12mm deep socket into a cordless drill you can evenly and safely apply the proper heat to the case using a propane torch.
Once the brass is heated properly simply dump it into your water bucket.
If you have any questions regarding this video or the process please sign up on our forum and post your question. www.ammosmith.com and click the forum link at the top of the page.- Dan Scott
Ammosmith.com Our Mission is to provide safe, accurate, content rich ammunition reloading video tutorials for use by all members of the ammunition reloading community. Our video library currently contains over 160 videos specific to reloading, casting/swagging, firearms and product reviews. With a library that extensive there is a good chance we have a video for most any reloading need. Our videos are laid out in an easy to understand manner where safety is always our primary concern.