Today is Thursday, October 23, 2014rss RSS feed
US Optics SR-4C Dot Sight

US Optics SR-4C Dot Sight

U.S. Optics

U.S. Optics

Brea, CA --(Ammoland.com)- U.S. Optics, Inc. leader in scope manufacturing announces the release of their much anticipated SR-4C dot sight.

The SR-4C features a true 1X power, low setting and a daylight visible red or green dot sight packaged in a lightweight aircraft aluminum housing and is MIL-A-8625 Type III hard anodized 30mm body.

The red dot can be set at any of 12 pre-programmed intensity settings.  The lower four settings are night vision compatible.

The SR-4C by U.S. Optics features the best of a holographic sight and a 1×4 variable magnified optic into a compact, rugged package that is 9.25” in length and weighs just under 20 ounces.  Low-profile windage and elevation knobs minimize the profile of the SR-4C.  2/10 MIL knob adjustments make zeroing the Mil Scale reticle quick and effortless. With a true 1X power setting, the 4-MOA red dot sight is perfect for quick and decisive target acquisition in CQB situations.  Dial the power ring to 4X to confidently engage targets at short ranges up to 500 yards.

Over 8,000 hours of runtime is squeezed out of a 3 Volt CR2032 lithium coin battery.

About US Optics 
U.S. Optics has been building custom riflescopes and optics for more than 23 years.  In this span of time the functionality, durability and clarity of the optics has evolved through research and development efforts, invaluable end user feedback, design innovation and proven engineering principles.  As the tradition of building custom riflescopes and optics carries on, a family of core products has emerged from U.S. Optics as a result of the their dedication and perseverance to build the best optics available for the precision shooter.

For more information please visit: www.USOptics.com

  • Leave a Comment

    • Sign up Ammoland for your Inbox

      Daily Digest

      Monthly Newsletter

    • Recent Comments

      • Eric: You forgot the Wilson 1 year waiting list…..
      • Eric: I don’t use a 50 caliber , I use a 12.7mm its a much smaller number, so its ok.
      • dave: Looking at the picture at the beginning of the article, the genie about to grant someone four wishes to...
      • meowkitty: I am currently headspacing my TacticalMachining 80% 1911 build. Got a cheap 18mm ball end mill on ebay to...
      • Floyd Oliphant: ok looks good whats the price on the 1911pistal
    • Social Activity

    • Most Popular Posts

      • This field is for validation purposes and should be left unchanged.
    Copyright 2014 AmmoLand.com Shooting Sports News | Sitemap | Μολὼν λαβέ
    14374440
    14982608