AmmoLand.com

New Hang-On’ Buddy Treestand Mounting System – Safer, Easier – More Versatile

Hang-On’ Buddy Treestand Mounting System

Predator Innovations

Fogelsville PA --(AmmoLand.com)- Predator Innovations, LLC has invented a better way to hang treestands with their new Hang-On Buddy™ Treestand Mounting System.

Not only does this unique product allow for an easier, safer way to hang and remove treestands but it also offers greater versatility in treestand placement.

This sturdy, easy to use product reduces the awkward, challenging and sometimes precarious task of installing a treestand.

Jason Werkheiser explains: “The Hang-On Buddy is a two part system consisting of a steel Mounting Base that is secured to the tree and Universal Mounting Hooks that are bolted onto the treestand. The Mounting Base is secured on the tree with a ratchet strap, where it can remain until ready to install the stand. The Mounting Hooks are then easily hooked into the Base and further secured with a locking pin. What this allows is an easier, faster and safer installation and removal of the stand. It also allows the hunter to adapt more treestand positions to move easily when necessary. In addition, it helps eliminate the threat of treestand theft, as the treestand can be quickly taken down at the end of the day.”

The Hang-On Buddy is made of 1/8” plate steel and has been tested by independent testing firms for structural strength and validated to over 1400lbs.

Werkheiser continued: “The Hang-On Buddy receives praise from many hunters who see a quality product that is relatively inexpensive, light weight, convenient and easy to use. This allows them to install a treestand with greater safety and ease and allows them to move one treestand from base to base to match hunting conditions. Not to mention taking their treestand out of the woods with them and preventing theft.”

For information contact:
Predator Innovations – 877-831-1525. – e-mail J@PredatorInnovations.com.
On the web at: www.hangonbuddy.com – Dealer Inquiries Welcomed

Filed under: Gun Gear by AmmoLand No Comments »

Reach New Heights With the Darkwoods Hunting Tower System
Compatible With Darkwoods’ Full Line of Portable Hunting Blinds

Darkwoods Blind

OKLAHOMA CITY, OK --(AmmoLand.com)- Take your hunting to the next level with the Darkwoods Tower System. The 5′ or 10′ Tower models will increase your vantage point and improve your odds for success all within the comfort of your favorite Darkwoods Blind.

Darkwoods Hunting Tower System

After fabrication and completion of the client’s Darkwoods Hunting Blind, each tower is built to fit the blind perfectly. The blind is then installed onto the tower platform and each hole for each leg and cross brace is properly aligned. All brackets and accessories are made to fit with the necessary hardware.

After the customer’s blind is fastened to the tower system, each piece is marked for the client’s easy assembly. Tie-down brackets (4 to 6) at the top and bottom of each blind and custom-made brackets and/or J-Bolts through the floor section finish the assembly.

The Blind is then removed and the tower components are all disassembled. Each component section is powder coated in a flat black finish to help prevent rust. The flat finish is also ideal for hunting, as there is no shine anywhere on the Darkwoods Tower System™.

Stay high and dry with the Darkwoods Blind Tower System

The standard powder coat color is black.
(Also available in beige, gray, green or water-transfer camo finish)

Platform Heights available: 5′ or 10′

Single Man Models: (5′ or 10′)
(Standard Gun Model – Crossbow/Gun Model – Bow/Gun Model)

Double FF Models: (5′ or 10′)
(Base Model – Deluxe Model)

For more info, call 405-520-6754, or check out www.darkwoodsblind.com.

Filed under: Gun Gear by AmmoLand No Comments »