MG Industries Unveils the .308 Hydra Modular Rifle

MGI Industries

BANGOR, ME --(Ammoland.com)- MG Industries is proud to announce the long anticipated .308 caliber in either the ultimate modular Hydra Rifle system or as a Conversion Package for current Hydra owners.

Now all the stopping power and performance of this popular caliber for long-distance shooting is available on the only completely modular and interchangeable AR15 platform in the world – the Hydra Modular Rifle System.

The .308 Hydra comes standard with an 18-inch MGI Quick-Change Barrel and QCB upper receiver with the MGI modular lower receiver.

The barrel features a 1:10 twist and the Hydra .308 weighs less than 8-lbs.MGI .308 Hydra Modular Rifle

The suggested retail for the MGI .308 Hydra Modular Rifle is $1,795.00 and the .308 Conversion Package is $749.00. For more information, visit www.mgi-military.com or your local retailer.

About MGI:
As a Maine based company, MGI is committed to providing the United States military and the American law enforcement community a weapons platform of endurance, reliability and lethality to face the mission and tactical challenges of a post 9/11 World. MGI products are MADE IN THE U.S.A. and available through Camfour (413-564-2300), Zanders (800-851-4373), Acusport (937-593-7010) and Ellett Brothers (800-845-3711) or visit www.mgi-military.com. Contact MG Industries at 207-817-3280 or MGI@MGImilitary.com for more information.

Fulcrum Trigger System For Glock Pistols Video

Brownells.com

Des Moines, Iowa – -(Ammoland.com)- Convenient kits combine easy drop-in installation with the performance benefits of a custom trigger job to give your Glock an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties.

Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness.

Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Small Frame model fits 9mm/.357 SIG/.40 S&W pistols and Large Frame trigger fits .45 ACP/10mm pistols.

Complete Trigger Kit contains the trigger, trigger bar, trigger block, ejector, connector, trigger spring, and a lightweight Titanium firing pin safety plunger and spring to further refine the trigger pull.

Comes with a reduced-power striker spring to produce a lighter-feeling trigger for competition, and the factory-weight striker spring for daily carry and duty use. Ultimate Kit adds to the Complete kit, a skeletonized stainless steel striker with reduced mass and highly polished surface to speed lock time and deliver an even lighter, smoother perceived trigger pull, plus ultra-fast reset so you’re ready for follow-up shots. Gen 4 Kits available for Gen 4 models 17/19 (9mm) and 22/23 (.40 S&W) pistols.

SPECS:
Aluminum, anodized, matte black; stainless steel, polished finish; molded polymer, black. Small Frame Trigger fits 9mm/.357 SIG/.40 S&W Glock pistols, including model 17, 19, 22, 23, 24, 26, 27, 34, and 35. Large Frame Trigger fits .45 ACP/10mm Glocks, including 20, 21, 21SF, and 30.

Click to the Glock Trigger Kit How Too Video

About:
At Brownells Everything is Guaranteed period! Forever, 100%, with no restocking fees. Brownells is the world’s largest supplier of firearm parts, gunsmithing tools, reloading equipment and accessories. Stocking more than 30,000 items, the company supplies armorers, gunsmiths, and shooters worldwide. All of their products are backed by a 100% satisfaction, unconditional, lifetime guarantee. For more information, or to place an order, call 800-741-0015 or visit Brownells.com

Kimber 1911 .22 LR Rimfire Conversion Kit Video - Click To View

Brownells.com

Des Moines, Iowa – -(Ammoland.com)- Whether it’s to improve your shooting form or just to save money on ammo, these easy-to-install .22 rimfire conversion kits from Kimber will let you get even more enjoyment from your 1911 pistol.

Fits almost any brand of mil-spec. 1911 with single-stack magazines and non-ramped barrels. Installation is as simple as field stripping. Changing from centerfire to rimfire can be completed in less than a minute. Includes one .22 caliber magazine. No modifications are necessary and you will not have to change mainsprings. Also available is an extra .22 caliber magazine.

Blowback-operated sub-caliber conversion unit lets you shoot less expensive.22 LR ammunition in any mil-spec 1911 Government model, so you can afford to practice more. Preserves pistol’s weight, balance, and overall feel to help you develop specific skills and “muscle memory” to shoot better with full-power ammo.

Simply remove the factory slide and barrel, replace them with the conversion unit, and load up the included .22 magazine with premium-grade high-velocity ammunition. Manufactured to the same rigorous quality standards as Kimber’s full-power 1911 pistols; slide is precision machined from aluminum billet, with wide front and rear cocking serrations and Kimber’s tough, scratch-resistant, KimPro II finish. Comes with plain black target sights installed; rear sight is click adjustable for windage and elevation, with flat, finely serrated rear face and a square notch. Includes ramped, match-grade 5″ barrel with a 1:16″ left-hand twist and stainless steel match-grade bushing.

Reinforced polymer 10-round magazine is designed for a secure fit in a standard .45 ACP mag well, and has an anti-tilt polymer follower to ensure smooth feeding of rounds.

Slide does not lock open after last shot; pistol may be dry fired with kit installed.

SPECS: Aluminum slide, steel barrel, polymer magazine. Available with matte black or silver slide. Fits 1911 Govt model pistols chambered in .45 ACP with 4” or 5” non-ramped barrels and dimensional tolerances that meet U.S. Government specs, including Series 70 and 80 Colt pistols and clones. Requires high-velocity ammunition for proper operation.

Click to View How To Video

About:
At Brownells Everything is Guaranteed period! Forever, 100%, with no restocking fees. Brownells is the world’s largest supplier of firearm parts, gunsmithing tools, reloading equipment and accessories. Stocking more than 30,000 items, the company supplies armorers, gunsmiths, and shooters worldwide. All of their products are backed by a 100% satisfaction, unconditional, lifetime guarantee. For more information, or to place an order, call 800-741-0015 or visit Brownells.com

Para's P14•45 1911 This is the pistol that set the standard for big bore high capacity firepower. The P14•45 gives you three-dot fixed sights for easy targeting, match-grade components and a durable non-reflective finish, at a price that can't be beat.

AmmoLand Gun News

Florence, Alabama - -(Ammoland.com)- After 99 years of service in the world’s darkest places, it is hard to believe that the venerable M1911 pistol has been with us for nearly a century and still remains one of the hottest firearms available.

No other firearm in history has been on the front lines of military and law enforcement for so long. Even more remarkable is the fact that the pistol’s design was finalized in 1910! It took the Army nearly a year to get it through the test process and adopted as the M1911.

The 1911 or its slightly modified version, the M1911A1 have been with us and have served in every military operation since its introduction. Beginning with General “Black Jack” Pershing’s expedition into Mexico in 1916, through World Wars I and II, Korea, Vietnam, Desert Storm and now the War on Terror, the 1911 continues to be the handgun of choice by law enforcement and military professionals when they have the option. Despite having been “officially” replaced by the 9mm M9 over 20 years ago, the 1911 soldiers on in our nation’s military, primarily in special operations units whose members appreciate the 1911’s legendary reliability and “stopping power” of the .45 ACP cartridge.

In law enforcement the 1911 is a “growth industry.” A 1911 type pistol is also the choice of many law enforcement agencies nationwide. The FBI Hostage Rescue Team and regional SWAT Teams all employ 1911s. Local agencies have also made 1911 pistols their choice. Special teams like LAPD SWAT and Special Investigations use 1911s – in this instance, Kimbers. The Tacoma, Washington Police Department and others have authorized 1911 pistols for patrol carry and the list is growing. Many individual officers of my acquaintance carry 1911-type pistols on duty and yes – my duty pistol is a 1911 type with standard five inch barrel, while my off-duty pistol is also a 1911 type, albeit with a four inch barrel. In fact, there are more manufacturers of 1911 type pistols now than ever before and most have trouble keeping up with demand.

Proven Design
Despite its age, the 1911 has many things going for that make many armed professionals prefer it to more recent designs. I have already alluded to the 1911’s well-earned reputation for reliability and lethality. But there are other factors as well. One is the natural pointing ability of the 1911 due to its grip angle that makes the pistol point like an extension of one’s hand – it is almost like pointing with the index finger. Carried as John Browning intended, i.e. Condition One (Cocked and locked), the 1911 is faster into action than any other pistol, especially DA/SA and DAO handguns and as safe as any, so long as one takes the time to learn how to properly use it.

For example, our local police department authorizes individual officer carry of 1911-type pistols on patrol, but only after a familiarization course, because the 1911 manual of arms should be learned prior to its use.

To take advantage of the 1911′s speed into action, simple but discrete actions must be learned. As the pistol is drawn and brought up into firing position, the safety is swept off and the finger placed alongside the trigger guard unless it is necessary to open fire immediately. If the need is to immediately begin shooting, the trigger can be pressed as soon as the pistol comes on target and the trigger’s “feel” is the same every time it is pulled, unlike DA/SA pistols that have a long heavy pull for the first shot and a short pull for the second, requiring a slight change in grip which in a gunfight could be hazardous to one’s health and continued well-being. The 1911’s trigger also enhances accuracy, which lessens the chance of missing or possibly hitting an innocent bystander while increasing the probability of ending the threat. Then for cops, there is the issue of officer safety. There are documented instances of bad guys getting an officer’s 1911 and not being able to figure out how to switch off the safety, giving the officer time to go for his BUG. (Backup Gun.) Nobody ever accused these morons of having an IQ above room temperature! Finally, there is lethality.

Winchester Ranger SXT Ammunition

As my friend and colleague Colonel (Ret) Marty Fackler, MD once told me, “You need to make lots of big holes so lots of air gets in and lots of blood gets out.” No military or law enforcement cartridge has terminal ballistics to equal those of the .45 ACP, especially when the rounds are loaded with modern jacketed hollow point (JHP) bullets like 230 grain Winchester Ranger SXT, Black Hills Gold Dot, Hornady TAP or Remington Golden Saber.

The 1911 isn’t for everyone because it requires training to safely use it and a simple manual of arms that must be learned and “hard wired” into one’s brain and muscle memory as opposed to revolvers and pistols like Glock or Springfield XDs that require only that the trigger be pulled for them to fire. In order to safely use the 1911, it must first be understood. For example, a few years ago one of the other officers at the police department where I serve as a reserve officer mentioned to me one day that my cocked and locked (Condition 1) 1911 type pistol made him nervous. I told him that while it may look more apt to accidentally fire, in truth his Glock had fewer safeties than my 1911 type. He was initially incredulous, but I proceeded to point out that first, my pistol’s hammer was physically blocked by the holster’s thumb break retaining strap that must be unsnapped to draw the pistol. Once the thumb break is opened and the pistol drawn, the manual safety must also be switched off, but that’s not all. The grip safety must be properly depressed so the trigger can release the hammer and in many modern 1911s like mine, there is a firing pin safety that physically blocks the firing pin and is deactivated only when the grip safety is properly depressed. Thus, I explained, my 1911 had no less than three inherent safeties, not counting the thumb break, while his Glock had only the trigger safety with the striker always cocked, essentially in Condition Zero.

Although he understood that my 1911 had more built in safeties, he still had some misgivings regarding the visible hammer even though he understood that his Glock was also “cocked.”

Magazine Capacity
Another issue that is sometimes raised is magazine capacity. One can make the argument for pistols with larger magazine capacity, but my response is that I now carry four Cobra Mags of eight rounds capacity each on my duty belt, giving me four rounds more than the three 12 round magazines I carried with my higher capacity pistol with virtually no increase in weight. The mags weigh next to nothing – it is the ammo load that matters. Of course, I have to change magazines more frequently during qualifications, but that is no big deal. I usually do a tactical reload between stages anyhow. For off duty or civilian concealed carry, it’s wise to keep a spare magazine handy. My belt slide holster that I use off-duty accommodates a spare magazine and the chances of my getting in a gunfight so intense that I need more than 16 rounds is slim to none. So magazine capacity really isn’t an issue for me, although for those who desire it, high capacity 1911s like Para Ord’s P14 up the ammo capacity considerably — from eight to 14 rounds of .45 ACP!

Reliability
But there are other reasons for the 1911’s’ unprecedented longevity. One reason is reliability. Given that it has been properly maintained, any well-made 1911 type pistol can be counted upon to go “bang” when the trigger is pulled. The operative word here is “maintained.” No handgun can be expected to function if it isn’t cared for, but the 1911 is more forgiving in this respect than most. In terms of longevity, some manufacturers crow about their pistols going for 300,000 rounds, but this hasn’t been documented to the best of my knowledge. What has been documented is the FBI tests that resulted in adoption of the Springfield FBI Pistol (Professional Model) for the agency’s regional SWAT teams. In these grueling tests, the candidate pistol had to fire 50,000 rounds without parts breakage. Many FBI agents report that their issue Springfields are still going strong after 50,000 rounds. More recently, Nighthawk Custom’s Global Response Pistols are guaranteed to have a 100,000 round service life. The FBI renewed its contract with Springfield, this time for M1911 type pistols with a MIL-STD-1913 rail on the dust cover to accommodate tactical lights. M1911s from Kimber or Springfield ride in the holsters of LAPD SWAT, US Marine Corps MEU-SOC units, the SOCOM USMC Detachment, Drug Enforcement Administration, Tacoma Washington Police Department, and numerous other law enforcement agencies.

Springfield Stainless 1911 Cocked And Locked

Cocked And Locked
As mentioned, the M1911 is arguably the fastest pistol on the planet to draw and get into action. This is because it is carried cocked and locked. As the pistol comes up, the thumb sweeps the safety off and the pistol is ready to do its self-defense job. The single action M1911 has other advantages, as well. Since it is a single action pistol, the trigger pull is the same every time, unlike DA/SA pistols that have a long initial trigger pull followed by a short single action pull thereafter. Double action only (DAO) pistols are IMHO generally abominations that are adopted by law enforcement agencies whose primary concern is liability, rather than officer safety.

Another previously mentioned ergonomic aspect of the M1911 is its grip angle, which makes the pistol the most natural pointing handgun ever designed. The grip angle is so close to perfection that many handgun designers incorporate it in their pistols to this day. Designs that incorporate the M1911 grip angle include pistols from Beretta, Heckler & Koch and Taurus, among others. Pointing a pistol with the 1911’s grip angle is almost as natural as pointing one’s finger. The 1911’s controls are ideally placed. The safety is in just the right position to be manipulated by the right thumb, as is the slide stop and magazine release. The only “improvements” to the original design since 1911 have been the incorporation of ambidextrous safeties for southpaws. If the shooter is right handed, there is no need for the ambidextrous safety, nor is there any need for full length guide rods that do nothing but make the pistol more difficult to disassemble and reassemble. Before some reader writes in taking me to task about how full length guide rods prevent the recoil spring from “snaking” inside the dust cover, don’t waste your time. The spring doesn’t “snake” because there is no room for it to do so.

I have seen high speed x-ray motion pictures of an M1911A1 cycling and trust me, the spring stays straight with a standard guide rod, just as John Moses Browning intended.

Design Improvements?
With all the changes in firearms technology that have transpired since 1911, none have had a significant impact on the basic M1911 design. About the only meaningful improvements to Browning’s original design have been sights. The original M1911’s sights were about useless and those of the later M1911A1 only slightly better. Most modern M1911 type pistols have much better sights than the originals and that’s about it. Sure, ejection ports have been enlarged and flared and “beavertail” grip safeties have ended hammer bite and enhanced control by slightly lowering the pistol in the shooter’s hand, safety levers have been extended and magazine releases raised for better accessibility, but that’s about it.

In the final analysis, if one is willing to learn how to proficiently use a 1911 type pistol, there is nothing really any better for self defense use. Moreover, the variety of 1911 type pistols and accessories is mind boggling. The variety is so great that Brownell’s, the world’s premier supplier of gun parts and gunsmithing tools, has a separate catalog just for 1911 type pistols. The beauty of many custom parts and components is that they can be installed by any 1911 owner who has the least bit of gunsmithing skills and many are simply “drop in” parts. Would you like a .22 pistol for practice? Brownell’s has the conversion that simply replaces the slide, magazine and barrel. Changing from .45 ACP to .22 LR takes only a few seconds and the process is identical to disassembling and reassembling the pistol for cleaning.

Kimber 1911 22LR Conversion Kit

I bought a Colt World War I Commemorative 1911 replica a few months ago as a collectible pistol. Although fully functional, I bought it as an investment and don’t intend to ever shoot it. It is an exact replica of the original 1911 as adopted by the US Army nearly 100 years ago.

The point? Although there have been quite a few changes over the years, the basic 1911 is the “same as it ever was” and if necessary, you could take my replica or an original 1911 and depend on it to get you through a crisis, knowing that the pistol’s basic functioning and its reliability and lethality haven’t changed in nearly a century.

How long will the 1911 be on the front lines of military and law enforcement?

Charlie Cutshaw

Nobody can say with certainty, but one thing is sure – unless Obama succeeds in banning handguns, the 1911 is going to be with us for a very long time.

• Para USA
• Kimber
• Brownells
• Springfield

About the Author:
Charlie Cutshaw is a well-known U.S. authority on military small arms and has an extensive experience as a former U.S. Army infantry, ordnance ammunition and intelligence officer. He is an editor for Jane’s Infantry Weapons and contributing author for other military and firearms publications. When not writing Charlie is a part time police officer in Alabama. Si vis pacem, para bellum MOLON LABE!

EMA Tactical Introduces The RONI Pistol To Carbine Conversion Kit

EMA Tactical

Tullytown, PA --(Ammoland.com)- Designed for the Special Forces operator, The RONI has found favor with SWAT, Motorcycle, School Resource Officers and Security Details.

Using the RONI, only one weapon is required for both close quarters and mid range engagements.

No more duplicating weapons, ammunition and magazines. The operator is carrying less weight. In utilizing one weapon system, logistics are streamlined, saving time and money by not having to stock replacement parts, magazines, ammunition and gun-smithing for two weapon systems.

Now, one weapon serves multiple applications. Because the RONI uses pistol caliber and not rifle caliber ammunition, there is much less chance of penetration thru walls causing collateral damage. The RONI converts your sidearm from a tertiary weapon into a primary weapon. The RONI is priced much less than a SMG. Training with one weapon system saves time and money and more importantly, allows the operator to develop the singular neuro-muscular coordination needed in high stress situations.

ACCURACY:

• RONI Pistol Carbine Conversion allows you to realize the accuracy inherent in the pistol. Targets can be engaged at 50 yards and beyond.
• The RONI shoulder stock design provides the stability to significantly improve accuracy and shooting distance. User accuracy is also increased because the sight line and rail height are above the barrel. The weight and design of the RONI significantly reduces recoil and eliminates muzzle jump contributing to increased accuracy.

TRANSFORMATION:

• A pistol can be installed in the RONI in 5 seconds. No pistol disassembly or gunsmithing is required for installation in the RONI.
• Repeatable zero is maintained when reinserting the pistol into the RONI. The RONI holds the pistol at three points, around the trigger guard, at the tang of the back strap, and at the under barrel rail mount.
• Slide operation is controlled by a cocking handle friction fitted to the slide serrations. • RONI’s enlarged cocking handle design makes cocking easier for any size operator and allows quicker clearing of jams.
• Jams are cleared exactly the same way as when shooting the pistol by itself. All necessary parts are accessible.

DESIGN FEATURES:

• Polymer body with a reinforced aluminum spine provides the strength, rigidity & durability needed while reducing carrying weight for the operator.
• Ergonomic design is a comfortable and user friendly. Featuring an adjustable cheek rest, collapsible butt stock and folding grip.
• Ambidextrous design of the front and rear sling mounts, charging handle and side rails allow for comfortable use by both left and right handed operators.
• Muzzle shroud includes an integral glass breaker.

BUTT STOCK FEATURES:

• RONI’s butt stock with 5 position length of pull adjustment provides a comfortable fit with or without body armor.
• RONI’s adjustable cheek rest is removable, providing a perfect sight picture when using low profile sights.
• RONI’s butt stock features a secure extra magazine mount positioned where it reduces reloading time but doesn’t interfere with shooting.
• RONI can be operated with the butt stock in the closed position.

RAIL FEATURES:

• RONI’s 9.25” one piece upper aluminum rail is long enough to accommodate a number of different sights, including a red dot + night vision or red dot + flip up sights.
• RONI’s two 2.5” aluminum side rails allow the attachment of other devices including flashlights, lasers, etc.
• RONI’s 2 1/8” lower polymer rail provides mounting for forward a grip.
• RONI’s top and side rails are CNC manufactured from aviation grade aluminum providing a solid platform for repeatable zero mounts.

SAFETY FEATURES:

• RONI includes a safety shroud to protect the trigger for pistols without a conventional safety devise.
• RONI has a forward finger guard to protect the forefinger from the barrel shroud.

VERSATILITY:

• The RONI can be used with the forward grip in a vertical or horizontal position.
• The RONI design allows the use of different model pistols from the same manufacturer in the same RONI body. RONI’s design allows for accurate single handed shooting from either hand.
• RONI’s unique design enables the user to “accurately point and shoot” because the barrel is significantly lower than the sight picture. RONI’s totally balanced design eliminates weapon recoil, improving accuracy and reducing target reacquisition time. Increased accuracy reduces training time.
• RONI’s imposing, futuristic, stylized design provides a much more deterring profile than a pistol alone.

DIMENSIONS:

• RONI G1 weight 3.22 lbs Overall length 18.5” (stock closed) 21.75” (stock extended) Height 7.5” (forward grip in vertical position) Width 3”.
• RONI with a Glock 17 at 4.62 lbs is almost 30% lighter than the H&K MP5/10 SMG at 6.23 lbs. • RONI is much more concealable because it doesn’t have the MP5 forward banana clip and because of its size.

OPTIONS:

• Three color options: Black, Green and Desert Tan.
• Optional hinged brass catcher with magnetic release provides easy access to the ejection port. Velcro bag closure quickly empties the spent cases.
• Optional secure magnetic vehicle mount allows for quick removal from the vehicle. • RONI accepts sound suppressors up to 1.375” diameter.
• In the USA, All NFA Rules Apply

About:
EMA TACTICAL is the world leader in the development and manufacture of superior advanced arms accessories. Our products are specifically designed to meet the rigorous demands of tactical solutions required by worldwide armed forces, Law enforcement units & weapon professionals. Visit: www.ematactical.com

PPSh-41 Submachine Gun

FirearmsTruth.com

Michigan --(Ammoland.com)- Certain collectible guns bring out that “wow” factor.

This is especially true of the vintage firearms from the Soviet Union that helped turn back the Nazi invaders and were carried by soldiers of the Red Army during the so-called Great Patriotic War.

Of course actually trying to obtain a live firing version of the infamous PPSh-41 submachine gun, or DP-28 light machinegun can be no small challenge.

Non-firing versions of both guns were once fairly common, but have since dried up. However, some of those old parts kits have been used to good effect by skilled gunsmiths such as Brennen Noble of Military Gun Supply, who has converted those into semi-automatic versions. The results are guns that are chambered for the original wartime ammunition yet are generally legal to own wherever semi-autos can be owned. These truly are the next best thing to have a wartime full-auto version, and Brennen took the time to answer a few questions.

Military Gun Supply

FirearmsTruth: Semi-automatic version of famous machine guns seems to be growing in popularity. Why do you believe this to be the case?
Brennen Noble: The famous machine guns from wars past have always been a fascination for many people. Movies and games have been getting better at accurately portraying old military weapons and have helped close the generation gap, getting younger people into the older guns as well. I think as more people begin to see an attainable version of these desirable military relics, people begin to realize what it possible and they will only continue to grow in popularity and demand.

FirearmsTruth: What are the more popular semi-automatic conversions?
Brennen Noble: The PPSH-41 and PPS-43 have been very popular for us. The pricing is mid-range as far as semi-auto recreations are concerned, and the pricing and availability of surplus 7.62×25 has always been a huge selling point for these guns. The same goes for our DP-28, which runs like a Rolex and eats inexpensive ammunition. The Suomi carbines by TG and the “Colefire” Sterling recreations by Wise Lite Arms have also seen a lot of popularity. Bren guns and RPDs are pretty popular for the DIY guys also.

FirearmsTruth: Are there any guns that you’d like to bring out in the future?
Brennen Noble: Oh boy! What wouldn’t we like to bring out? We do not have any current active plans for other semi-automatic conversions at this time. There is a reason that it has taken a long time for the semi-autos to catch on despite the several that have come out and failed over the years. The amount of trial and error, blood, sweat, and tears required to bring these back to life in semi-automatic form that can function reliably is astounding. Not only that, but you have to develop a solution that is practical on the production level.

Keeping the correct “look” is also a hurdle, but is absolutely paramount because that’s the whole idea behind them. People love these guns because they are recognizable and well known. People see these guns in movies and video games and it’s the cool factor of “Oh WOW, that’s a Pa-pa-shaw like in Enemy at the Gates!” or “HOLY COW I saw one of these in Defiance!” It’s a conversation piece and attention getter at the gun range. People enjoy that.

FirearmsTruth: Are you seeing more newly made semi-automatic firearms, or are many of these built on original “fully automatic” parts kits?
Brennen Noble: One of the things that makes any semi-auto reproduction a good candidate for large-scale production is that the parts kits are out there and you can use a lot of the original parts like the buttstocks, sights, etc. A 100 percent reproduction would cost more to produce and have less value to the market because it loses its authenticity. Some of the details on these guns would be very hard to reproduce, like the specific feel and color of the wood used in the real thing. You can also see original proof marks and other things that add character and really remind you that you’re holding a piece of history in your hands.

FirearmsTruth: Given the limited number of parts kits do you believe these have a limited number for collectors?
Brennen Noble: Absolutely. There are already kits out there that have gone dry. Our KP-44 pistol is a good example of that. The kits are gone and once we sell out, we’re not going to have any more. I’ve watched RPK and PKM kits pretty much vanish, Galil kits are gone. It does happen and these are not unlimited.

FirearmsTruth: While the semi-automatic versions of some of the firearms, such as the DP-28 or PPSh- 41, are a great alternative to the full-automatic versions, are you seeing that new restrictions are making even these difficult for some to own – such as California residents?
Brennen Noble: Absolutely. The biggest obstacle we come across is magazine capacity. States that allow pre-ban high capacity magazines are appreciated in these instances, but that’s a pretty silly law to begin with. Another problem you run into is obscure requirements like weight restrictions on pistols, or overall length restrictions on rifles which means we have to weld folding stocks open before shipping a gun out, etc. It’s unfortunate that everyone can’t enjoy these firearms, but we do try to accommodate customers in those States and make necessary modifications so they can own one if possible.

FirearmsTruth: Do you think there will be greater restrictions on some semi-automatic firearms? And while these are a gray area in regards to assault weapons, would you agree that the truth is that these are often impractical compared to other commercially available firearms at least to the badguys out there?
Brennen Noble: You don’t usually see restrictions reducing; they generally only tend to get tighter. Many semi-auto reproductions do not meet any of the criteria of the “assault weapon” definition except for the magazine capacity. Clunky WWII guns are far from concealable. Inversely, they are also not well suited for self-defense.

Not to go off-topic, but let’s face it, instead of controlling guns we should be controlling CRIME and preventing the conditions that breed criminal activity. Gun crime might go down if guns are banned, but violent crime will skyrocket. If not a gun, a knife. If not a knife, a hammer.

Thank you to Brennen Noble for talking with us.

PPSh-41 Submachine Gun

Peter Suciu is executive editor of FirearmsTruth.com, a website that tracks and monitors media bias against guns and our Second Amendment rights. Visit: FirearmsTruth.com

EMA Tactical Introduces The RONI Pistol To Carbine Conversion Kit

EMA Tactical

Tullytown, PA --(Ammoland.com)- EMA TACTICAL is proud to introduce our most prized product, the RONI.

The RONI allows you to easily convert your pistol to an accurate carbine in less than 6 seconds by simply unlocking two pins and inserting your handgun. There is no need to carry both rifle and pistol ammunition, with the RONI you are guaranteed increased accuracy to 100 yards and beyond. There is no pistol disassembly or modification required.

The RONI comes equipped with a optional folding forward grip, one full length 9.4” aluminum top rail and two 2.25″ aluminum side rails. A fourth picatinny rail is available under the barrel extension. A 5 position collapsible stock and adjustable cheek piece are provided for your comfort and to increase performance. A spare magazine holder, optional brass catcher and removable barrel shroud for a 1.3″ supressor are additional features to the RONI.

The RONI fits: Glock 17, 18, 19, 22, 23, 25, 31, 32, 34 & 35 – In stock now for immediate delivery.

Coming in 30 days – including Bersa 9mm, Beretta PX4 Storm, Jericho, Glock 21, Sig Sauer 226 & 2022, Beretta PX4 Storm and PX4 Storm 45 cal., H&K USP, S&W M&P, Springfield XD 9mm & 40 cal, FN 5-7. Models coming soon include the Beretta 92, M9 & M91A, H&K USP, Bersa Thunder & Bersa Thunder Pro, Jericho, CZ Duty 07 & 08, Para P14, FN Five-7 and Glock 21.

About:
EMA TACTICAL is the world leader in the development and manufacture of superior advanced arms accessories. Our products are specifically designed to meet the rigorous demands of tactical solutions required by worldwide armed forces, Law enforcement units & weapon professionals. Visit: www.ematactical.com

ArmaLite .22LR Conversion Kit

ArmaLite Inc

Geneseo, IL – -(Ammoland.com)- Geneseo, IL – ArmaLite is pleased to announce a new addition to its fine line of products. We now offer a .22LR conversion kit that fits all M-15 upper receivers. With a conversion kit installed, shooters can now practice with their M-15’s using .22LR ammo that’s ONE TENTH the cost of .223 ammo!

ArmaLite is offering a special, introductory “$AVE NOW/$AVE LATER” deal for the conversion kit. Buy any ArmaLite firearm from an ArmaLite dealer and you get the conversion kit and one .22LR magazine directly from ArmaLite for just $139.95. That’s a $60 dollar savings off the kit’s normal price! Additional .22LR mags are just $20 each.

Save money on the .22LR conversion kit NOW! Save money on your .22LR ammo LATER! The conversion kit and the special introductory price are ArmaLite’s way of helping you “shoot, shoot, shoot and save your LOOT!”

Conversion kit offer is good July 1, 2010 through August 31, 2010. To take advantage of the offer you must send your firearm’s original proof of purchase and warranty card, both dated between July 1, 2010 and August 31, 2010, to ArmaLite. Your letter must be postmarked by October 31^st. Go to www.armalite.com for more details.

About:
ArmaLite has one of the broadest product lines in the firearms industry. We manufacture and sell semiautomatic rifles in a variety of calibers including 5.56mm and 7.62mm, long range super-accurate bolt action rifles in calibers including .308 Winchester, 300 Winchester, 338 Lapua, and 50 BMG, and classic 9mm

Taurus 822 Handgun in Black

Taurus Firearms

MIAMI, FL – -(AmmoLand.com)- Shooters looking for the ultimate .22 LR semi-auto pistol should look no further than the new Taurus 822.

This cool new update of the Taurus 800 Series offers record setting speed, industry leading reliability and handles these favorite calibers with ease.

A casual day of plinking or more serious target practice is close at hand with this feature-laden super gun.

The Taurus 822 offers 10+1 rounds of .22 LR and is available in blue or stainless slides. Advanced “Strike Two” trigger capability offers incredible reliability and contoured ambidextrous thumb rests and finger indexing Taurus Memory Pads™ provide added purchase and safe firearms handling. Additional features include ambidextrous magazine release, external hammer, aggressive checkered grip, adjustable sights and Picatinny rail.

Taurus 822 Long Slide Handgun

The 822 with standard barrel measures 4.5 inches, with an overall length of 7.75 inches and weighs 21.3 ounces. The 822 with long slide barrel measures 6 inches, with an overall length of 9.25 inches and weighs 22.7 ounces. Standard safety features for the Taurus 822 include a visual loaded chamber indicator and the unique Taurus Security System® that allows users to securely lock the gun using an inconspicuous key-lock.

Taurus also offers an 800 Series Conversion Kit that quickly and easily changes any 800 Series to fire the .22 LR round. Simply change out the slide, insert the new 10+1 round magazine and the user will be able to fire this popular and affordable round. Perfect for target practice and plinking without busting the budget on ammo. Available in standard or long slide version.

Taurus 822 22lr Conversion Kit for 800 Series Handguns

About:
Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Taurus has become a diversified, international company celebrating resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. For additional information about Taurus and its complete line of products, visit www.taurususa.com.

Beretta U22 Neos Carbine

Beretta USA

ACCOKEEK, MD --(AmmoLand.com)- Beretta U.S.A. recently introduced its new U22 Neos Carbine Kit, adding another level of performance and modularity to its U22 Neos pistol product line.

The new carbine kit, which is now shipping to dealers and distributors, is ideal for target shooting and for hunting small game.

According to Gabriele de Plano, Vice President of Tactical Marketing at Beretta USA, the addition of this carbine kit further enhances the versatility of the U22 Neos by allowing the user to transform the pistol into a handy plinker carbine or lightweight camp gun. The kit may be disassembled for easy and compact transportation.

The U22 Neos Carbine Kit includes a barrel/fore-end/top rail assembly and a stock unit that easily replaces the pistol’s barrel and grip using the supplied multi-purpose tool. A TRUGLO™ orange fiber optic front sight is standard, as well as a fully adjustable aperture rear sight, to provide fast target acquisition. Both sights are removable and replaceable. The barrel features a built-in machined aluminum Weaver™-style rail that allows mounting of optics using standard mounts. The stock features a rubber butt plate, as well as attachment slots for future accessories. Every U22 Neos pistol and carbine may be accessorized with a complete line of products.

The Kit is also approved for sale in California.

Beretta, established in 1526, is the oldest industrial dynasty in the world tracing its roots through 16 generations of continuous family ownership. Firearms bearing the Beretta name have been sold for almost 500 years. Beretta USA Corp. was founded in 1977 and supplies the standard sidearm to the U.S. Armed Forces. Today, Beretta manufactures, distributes and markets a complete line of firearms, accessories and apparel. Beretta also owns and operates six retail Beretta Gallery stores worldwide. For additional information, visit www.berettausa.com.

Wilson Combat 22LR Caliber AR Upper

Wilson Combat

Berryville, AR - -(AmmoLand.com)- Our brand new addition to the AR accessory list is the complete upper in .22LR.

This upper has all the Wilson Combat features that you demand on your rifle: Quad-Rail, Flip-Up Front Sight, Accu-Tac Flash Hider all in the Flat-top M-4 package ready to go on your AR lower.

Add the Flip-Up Rear Sight and your favorite optic. Now you have the most cost effective way to keep your skills sharp and you get hours of fun shooting with cheap ammo.

• Product ID: TR-M422UP
• TR-M422UP
• Description: Complete AR upper in .22LR.
• Price: $995.00

About:
Founded in 1977, Wilson Combat has grown to include more than 50 employees – no one else in the custom gun business has as many professionals, as many years of experience, or as much history with hand-crafting custom guns as we do. Here’s an idea of the type and number of years experience you will find at Wilson Combat.

Tactilite .50 BMG AR-15 Conversion Kit

Tactilite.com

ODESSA, FLORIDA - -(AmmoLand.com)- Zel Custom Manufacturing, which recently purchased the Ultralite50 product line, has released the Tactilite™, an improved line of the classic .50 BMG conversion kit for AR-style rifles.

The Tactilite™ improves on the Ultralite50 design by adding a free-floated barrel with an interchangeable handguard, offering Lothar-Walther standard and match barrels and providing CeraKote™ as a standard finish. The Tactilite™ continues the Ultralite50 tradition of affordability, durability and safety.

The Tactilite™ is a complete upper assembly that allows a user to quickly, and without special tools, convert a standard AR-15 rifle into a precision single-shot, bolt-action, .50 BMG rifle. With prices starting at $1550, less than half the price of most .50 BMGs, the Tactilite™ is designed to be a highly affordable way for people to own a .50 BMG.

“We are extremely excited about offering a better range of models to fit every shooter’s need and budget. We continue to offer the Defender model, an 18.5″ version, which is highly affordable and designed for shoulder-mounted firing. At the other end of the spectrum, we now offer the Super Match model, which is designed to fit the needs of marksmen new to 1000-yd competitions.”

About Zel Custom Manufacturing, LLC
Zel Custom Manufacturing, LLC brings 20-years of firearms experience to the design process and is the manufacturer of both the Tactilite and Ultralite lines of .50 BMG AR-conversions kits. Zel maintains all its production facilities in Odessa, Florida. For more information, please visit us at www.zelcustom.com.