AmmoLand.com

Thompson Center Venture Rifle Recall Notice
S&W Issues Recall Notice PRODUCT: Thompson Center Venture Rifle.

Thompson/Center Arms T/C Venture Rifle

Thompson Center Arms

ROCHESTER, NH --(Ammoland.com)- DESCRIPTION OF THE HAZARD: During an internal technical review, Smith & Wesson determined that some of the sears used on Venture rifles produced from August 1, 2011 to October 28, 2011, may not have been manufactured to specification.

Because the sear is an important part of the firing mechanism, we are asking that all of the rifles produced during this time period be returned to Smith & Wesson so that the firearm can be inspected by our technicians to ensure that the rifle operates in a safe and appropriate manner.

DESCRIPTION OF THE PRODUCT INVOLVED: This recall applies only to Venture rifles manufactured from August 1, 2011 to October 28, 2011. To determine if your rifle is affected, please reference the serial number list located at www.smith-wesson.com/venturerecall or by calling Smith & Wesson directly at 1-800-713-0356. If your serial number does not fall within the list of affected serial numbers, your rifle is not part of this recall.

REMEDY/ACTION TO BE TAKEN: STOP USING YOUR RIFLE. Any unintended discharge of a firearm has the potential to cause injury, and we ask that you stop using your rifle until we have an opportunity to inspect the sear to make certain that there is no condition which will allow the rifle to fire without the trigger being pulled. To facilitate the inspection and repair, if necessary, of your rifle sear, please contact Smith & Wesson’s customer service department to receive instructions and a prepaid return label for the return of your rifle to Smith & Wesson. When you return your rifle to Smith & Wesson, be sure to attach the completed information card received from Smith & Wesson, so that your sear can be inspected and repaired, and returned to you as quickly and efficiently as possible.

VERIFICATION OF CORRECTIVE ACTION: When your rifle sear is returned, you should note a punch dot on the trigger assembly. This punch dot is confirmation that your sear has been inspected and the hazard has not been found or has been corrected.

CONSUMER CONTACT: Please contact Smith & Wesson directly at 1-800-713-0356, or at venturerecall@smith-wesson.com to arrange for the inspection and repair, if necessary, of your rifle.

Filed under: Firearm News, Shooting Industry News by Ammoland No Comments »

Glock Announces Voluntary Replacement Of Recoil Spring Assemblies In Gen4 Pistols
Replacement Program Limited to Gen4 Model with GLOCK Covering All Shipping Expenses.

Glock Announces Voluntary Replacement Of Recoil Spring Assemblies In Gen4 Pistols

Glock Pistols

SMYRNA, Ga. --(Ammoland.com)- GLOCK Inc. announces that it is voluntarily exchanging the recoil spring assembly (RSA) on its new Gen4 pistols shipped since August, 2009, to ensure each pistol’s performance meets the company’s demanding standards.

With several variations of the RSA in the market today, GLOCK’s goal with this voluntary exchange is to standardize the RSA to gain the best possible performance in each pistol.

GLOCK’s product development team has modified various elements of the RSA. The new RSA compensates for all design modifications made to the Gen4 and allows the pistols to function up to GLOCK’s rigid quality standards and reliability goals.

Consumers should note that Gen4 G26 and G27 models will not require a modified recoil spring.

“We are moving proactively and quickly to standardize this part of the pistol. This is a voluntary exchange specifically for the new Gen4 models,” said Gary Fletcher Vice President GLOCK Inc.

“We have developed a program for consumers to send in their existing recoil spring assemblies and receive new ones at no cost.”

The replacement of the Gen4 pistol RSA can be performed as part of the regular field-strip process; consumers do not need to take the Gen4 pistol to an armorer. Consumer’s wishing to participate in the exchange program are urged to call 1-877-745-8523 to order their new recoil spring.

For more information on the details and shipping requirements on the replacement program, visit www.teamGLOCK.com.

Glock Announces Voluntary Replacement Of Recoil Spring Assemblies In Gen4 Pistols

About GLOCK, Inc.
GLOCK, Inc. is a leading global manufacturer of pistols and accessories. GLOCK’s superior engineering has produced a pistol with only 34 parts and a rugged polymer-frame, providing industry-leading reliability shot after shot. GLOCK is renowned for its pistols which are safe, featuring three safeties; simple, offering a low number of components to provide reliability; and fast, with no encumbering parts to slow the speed to fire. This combination makes GLOCK pistols the first choice among consumers and law enforcement, with 65% of agencies nationwide choosing to carry GLOCK. Austrian-engineered, the company has manufacturing facilities in the United States and Austria. Based in Smyrna, Ga., GLOCK, Inc. is an advocate for our nation’s law enforcement and military personnel, as well as all citizens’ Second Amendment right to bear arms. For more information, please visit www.teamGLOCK.com.

Filed under: Firearm News, Shooting Industry News by Ammoland 2 Comments »