Parabellum Armament Ambidextrous Charging Handles For M4/M16/Ar15

Parabellum Armament

Cincinnati OH --(Ammoland.com)- Parabellum Armament Company, a veteran owned and operated company specializing in the manufacture and distribution of USA made products for military, law enforcement and responsible citizens, in partnership with Arma Dynamics is proud to announce the new line of Ambidextrous Charging Handles for the M4/M16/AR15 weapon system family.

Designed and intended for the military environment, the new line features two variants- The URL (Universal Release Latch) and ADF (Ambidextrous-Dual Functioning) models.Parabellum Armament Ambidextrous Charging Handles

Both models share a common, ergonomic shape which is wider than the standard USGI charging handle and designed with contoured ergonomic grasping surfaces to assist in charging handle operation. This patented shape is the result of a human, form-factors study and is unique within the industry. No other M4/M16/AR15 charging handle has ever been designed as specifically around the human movement.

Both the ‘URL’ and ‘ADF’ charging handle products share an identical shape and have 80%+ parts commonality.

‘URL’ Model Charging Handle - The Universal Release Latch model offers a large push tab on the rear of the grasping surface which goes beyond ambidextrous activation by making it universal. No matter what hand is used, an intuitive and normal grasping action is used to operate the mechanism. Closing the thumb and fingers together in a natural grip from any side or angle will compress the rear mounted latch release button, thereby freeing the latch simultaneously as the hand begins to withdraw the charging handle. The ‘URL’ charging handle provides the most intuitive and natural function possible based upon the normal physiology of the thumb and fingers naturally closing together during the gripping motion.

Installation of the ‘URL’ charging handle converts any M16/M4-based weapon system into a universal platform. No longer will any attention need to be paid to strong or weak side operation of the charging handle as the same completely intuitive and normal central grasping motion is instead utilized for every charging event and is equally available from either side or any condition. Weapon charging becomes a smooth, controlled and highly efficient operation that requires no re-training of muscle memory as the natural gripping action required is inherent in human physiology. Off-side, weak-side and non-traditional charging and weapons handling drills and exercises become a thing of the past as the ‘URL’ model charging handle allows the exact same grasping location, inherent feel, and tactile activation from all contact angles. There is no longer any need to switch techniques during these weapon manipulations as the centrally located rear operated activation button operates the same in all situations.

‘ADF’ Model Charging Handle - The Ambidextrous-Dual Functioning model appeals to the operator who prefers the advantages of ambidextrous activation, combined with aggressive activation during rapid-action scenarios.

The ‘ADF’ charging handle is engineered to eliminate the traditional weakness found in normal charging handles when certain modern charging techniques, such as “blading”, are used to rapidly and forcefully open the latch and charge the weapon. Under such techniques the full direct force of the operators actions are directed into the very small and weak latch retaining pin area, an area that was never designed to accommodate such forces.

The revolutionary ‘ADF’ activation mechanism design completely eliminates that pathway of force transmission. With the new design there is NO direct contact, or force transmission, into the latch pivot pin itself along that pathway, eliminating any chance of breaking the pin or tearing apart the charging handle at that location. Instead, this design offers right and left side activation levers that provide initial contact to begin opening the latch, but then the force transmission pathway immediately re-directs all rearward forces back into the structure of the charging handle itself, removing any shock and stress to either the individual activation levers or the retaining latch itself. By this mechanical force pathway management, a direct, rapid force can be applied to the charging handle at its strongest, most massive, location while removing any chance of damage to the activation levers or latch system.

Further, the dual activation levers feature true balanced-force activation such that activation of the handle using either lever results in a smooth, light and easy, opening of the retaining latch with no drag or hesitation. With this ambidextrous design, each activation lever moves independently of the other, biased only by a unique ultra-light spring force and not interconnected to the other lever or latch itself. Other designs mechanically interconnect the separate levers which cause drag, excessive opening force and wear to the components.

The ‘ADF’ design offers the traditional look and feel of forward mounted activation levers but adds the capability of utilizing newer manipulation techniques without fear of damaging the latch or handle. This greatly reduces the chance of damage to the host weapon’s internal components such as bolt, bolt rings, and bolt carrier as can happen when a conventional charging handle is overstressed and fails.

Both models are currently in limited series production and professional deployments. Pricing and availability have not been determined.

About Parabellum Armament:
Parabellum Armament, located in Cincinnati, Ohio, is a company owned and operated by seasoned combat soldiers. Dedicated to making USA made, high quality tactical gear and accessories for operators and individuals that put themselves in Harm’s Way, Parabellum Armament has set the bar to very high standards for quality products made to protect the very lives the protect our freedoms. Parabellum Armament designed and developed the patented AK Adaptive Rail System (AKARS) that upgrades the popular AK rifle and its variants to a level of accuracy often associated with AR/M16/M4 models. For more information on Parabellum Armament, visit www.parabellumarmament.com

Otis Technology Gerber M16 Rifle Cleaning Tool

Otis Technology Gun Care

Lyons Falls, NY --(Ammoland.com)- Otis Technology, manufacturer of advanced gun cleaning systems and accessories, joins forces with Gerber Legendary Blades to create the new M4/M16 Cleaning System with eFECT (Field Expedient Cleaning Tool).

This new cleaning system provides the necessary tools to completely break down and clean the most critical parts of an M4/M16.

Included in the cleaning system are Otis Memory-Flex cleaning rods, slotted tips, 100% cotton cleaning patches, bore brushes, and CLP which allow for quick cleaning of the receiver, neck and bore. The Gerber eFECT Weapons Tool is included and was developed for the distinct purpose of cleaning and maintaining an AR15/M16/M4 variant. It incorporates components that make field cleaning faster and more precise and is compatible and interchangeable with Otis cleaning components.

Brent Bateman, Vice President of Government/Military Sales for Gerber states: “Gerber is excited to partner with Otis on their new MFG-556-eFECT weapons cleaning kit. From the moment the Gerber eFECT Weapons Tool was released, the response from the field has been overwhelming.

Our military customers have continued to ask us to place this multifunctional tool into a kit that combines both the Gerber eFECT Weapons Tool with an Otis cleaning system. The two items are well suited and complement each other. This kit will allow the user to conduct a multitude of tasks, from sight and optic adjustment, to detailed weapons cleaning, further enhancing their capabilities. It is great for Gerber and Otis to be able to listen to our customers’ needs and bring them the gear they need in the field.”

Brad McIntyre, Military/Federal Manager for Otis Technology adds, “Listening to the warfighter has resulted in Otis looking into an alternative weapons cleaning system. The tool kit needed would allow the warfighter to clean and properly maintain all aspects of the weapon system. As a result, Otis teamed with Gerber to create the M4/M16 Cleaning System with eFECT Weapons Tool. This system will further allow users to sustain their weapons in the field, increasing the weapons life cycle.”

Otis Technology is known for manufacturing the most advanced gun cleaning systems available. The superior Breech-to-Muzzle design combined with unmatched quality has positioned Otis as the gun care system of choice with the US Military. Visit: www.otisgun.com

RAP4 M4 Carbine Furniture

RAP4

San Jose, CA --(Ammoland.com)- Real Action Paintball is proud to introduce two dramatic concepts, and a whole lot of color, to accessorizing your T68 marker.

To complete the M4 look, and vastly improve its functionality, you need a multi-position collapsible stock…and you need it in colors that complement your environment and other gear.

Better yet – how about hiding a 5oz CO2 or 13ci HPA tank inside of that stock, doing away with remote lines and external tanks entirely? RAP4 makes it happen…and puts those stocks together with matching handguards, so you can coordinate your entire marker.

The T68 Paintball Gun M4/M16 Carbine Kits come in your choice of colors, including foliage green, dark earth, olive drab, black, and for very special applications, red and blue as well. The kits come with upper and lower handguards and the multi-position collapsible stock – swap them out in moments, and you’ll be ready to rock!

Kits featuring the standard collapsible stock also come with an M16-style pistol grip in matching color!

For owners of Tippmann, BT, Spyder, and other tactical markers, you can even purchase an M4 Carbine Kit that attaches directly to your marker…and they’re available in two hot configurations and all five colors!

When you want to attach an air source directly to your marker, but don’t want to hang a full size tank off of it or wrap yourself in a remote line, here’s your solution: the 5oz/13ci Carbine Kit! By slightly enlarging the tube at the heart of the collapsible stock, RAP4 engineers have designed a unit that allows you to install that mini air tank directly on your marker, then cover it up with the fully functional collapsible stock! Slide it forwards to shorten your marker for CQB, slide it backwards to extend your length of pull for more comfortable, and more solid, long-distance shooting.

Both kits are available in those custom colors, so you can match your marker to the olive drab in your BDUs, the dark earth in your tiger stripes, or the foliage green in your digital cammies…or go with standard-issue black. There are special police and military uses for the red and blue furniture kits, but you might just use them to indicate which team is which – the story of red vs. blue as told in the colors of your markers!

RAP4 is your only source for these M4/M16 Carbine Kits…and puts you in control with two styles and six color choices! Complete the mil-sim look, feel, and function of your T68…today!

Real Action Paintball – As Real as it Gets!

About:
RAP4 is recognized as a leader in compressed air-powered marking technology, with patented innovations for military and law enforcement tools and industry-leading paintball sport equipment. Headquartered in San Jose, California, RAP4 has distributors across America and around the world. Trained staff members are available by phone or in person for consultations, and to troubleshoot or train your personnel on use of their equipment. visit www.rap4lesslethal.com

International Training Inc

DILLEY, TX --(Ammoland.com)- International Training, Inc. (ITI), a subsidiary of Wackenhut Services Inc., and providers of benchmark security training programs to the U.S. Government, U.S. Military and corporate America, will be hosting Bennie Cooley of C.R.T.C. Inc. in Urban Tactical Rifle (M4) and Handgun Training on February 4-6, 2011 at their Texas Campus.

This Urban Tactical Rifle course is based around the M4 or like variants that the officer will use for tactical applications.

About International Training, Inc.
International Training Incorporated (ITI) is a subsidiary of Wackenhut Services Inc. Founded in 1989; ITI is committed to providing benchmark security training programs emphasizing professionalism, quality, customer service, and a fair price. ITI conducts both mobile and fixed site training in security assistance and security service programs for the U.S. Government, U.S. military, corporate America, and now private citizens. For more information on ITI or any of their courses, log on to www.itiwsi.com.

Chiappa .22 LR M-Four Tactical Handgun

Chiappa Firearms

Dayton, OH --(AmmoLand.com)- Chiappa Firearms’ all new .22 L.R. handgun will hit the shelves early 2011.

This unique Chiappa .22 L.R. caliber handgun is identical to Chiappa’s .22 L.R. look alike of the U.S. Military M-4 Carbine.

Chaippa then eliminated the shoulder stock and shortened the barrel to 6-inches creating a new smallbore handgun.

A 28-shot magazine means a bunch of fun between reloads. Robust and reliable, this new handgun has all the same buttons and switches as the regular M-4 Carbine so any learning curve between the real combat carbine, the Chiappa smallbore military look alike carbine and the new Chiappa M-Four pistol is zero.

• MSRP: $469.00
• Weight: 4.1 pounds
• Overall length: 145/8 inches
• Barrel length: 6 inches
• Magazine capacity: 28 rounds
• Caliber: .22 Long Rifle
• Fun level: High

Marketed by:

MKS Supply, Inc.
8611-A North Dixie Dr
Dayton, OH 45414,
837-425-4867 or 937-545-0363
www.mkssupply.com

Larry Vickers Signature Series Daniel Defense M4 Carbine

VickersTactical.com

Fayetteville, NC --(Ammoland.com)- The folks at Daniel defense and I have been talking about doing a Vickers Tactical signature carbine since last year but only recently did we get our collective heads together to make it happen.

They are busy with government contracts as well as civilian customers and I have never been busier in my life since adding “firearms TV show host” to my list of duties.

In addition, only within the last year have they got on line with not only hammer forged barrels but lightweight or so called ‘pencil’ hammer forged barrels as well. Add to this some new accessories hitting the market and clearly it was time to make this rifle a reality.

The base carbine is essentially a DD M4 with a lightweight barrel. I was involved to a small degree with bringing that rifle to the market and I thought we did a great job then and I still do now. The barrel of course is made to mil spec standards and materials with a chrome lined 1 in 7 inch twist, except with a profile that drops a significant amount of weight. We added the top of the line RIS II rail system, the exact same one chosen by SOCOM for the SOPMOD block II contract, except in black. The RIS II in black has been nearly unobtainable so we felt that this premium quality carbine deserved a special rail and the introduction of the first Daniel Defense rifle to have a RIS II as standard equipment is a great start. And of course like all RIS II rail systems the bottom rail panel is removable to allow the end user to mount an M203 grenade launcher if need be.

No match trigger is fitted as I am very skeptical of them; after being an early proponent of the idea of a refined trigger in a truly combat worthy M4 carbine I have seen my fair share of problems with the concept. One bitten twice shy is my motto on this, so until I see one that I think is really bombproof I won’t have one in a Vickers Tactical carbine.

The rear sight is the excellent DD A1.5 fixed rear sight and standard pinned front sight / gas block assembly that protrudes thru a hole cut into the rail system. The DD rear sight was another product I was involved with that I am proud of; a really good piece of kit. To go along with this is the superb Aimpoint Micro T1 mounted in the DD Micro mount. This mount was designed to be a companion piece to the A1.5 rear sight and puts the irons in the bottom 1/3rd field of view. This whole setup is lightweight, strong, sleek and makes for a great red dot/back up iron sight aiming system.

The buttstock is the excellent VLTOR IMOD in brown. Magpul products on the carbine consist of the polymer trigger guard, pistol grip, anti tilt follower and low profile base plate installed on the aluminum Brownells magazine in brown. This was the only brown magazine on the market that I felt was up to my standards and my test mags have performed flawlessly. Remember however that like all USGI type aluminum magazines it should really be considered a 28 round mag, not a 30 rounder.

Daniel Defense

I added a Bravo Company gunfighter charging handle to the package but in the shortened mod 5 format (which was made at my request) and with radiused edges. I was luke warm on the mod 3 & 4 versions of this product but the mod 5 is a winner. As we move forward on the carbine the RIS II sports Ergo rail ladders in brown as well as a DD convertagrip stubby in brown. In the past I have never been a big vertical foregrip fan but the next piece of kit and it’s location changed that forever; the Surefire X300 mounted at the 12 o’clock position in front of the front sight. The best location I have tried to date for white light placement on a fighting gun. It allows you to use your thumb to activate the light from either side and is low enough you can see your irons over top. The convertagrip stubby is used as leverage to perform this by choking up on the rifle and getting your hand higher on the rail. This allows for excellent weapon control and provides excellent access to your white light without the possibility of masking the light while clearing corners. In addition the X300 provides alot more useable light than the older X200 and works great on a carbine or a pistol. In short a great white light setup.

The flash suppressor is from Surefire also and doubles as a mounting interface for their 556k shorty suppressor. Of course all this is topped off by the famous Vickers Combat Applications Sling (VCAS) exclusively manufactured by Blue Force Gear. This particular version is the padded variant in brown with the polymer adjuster. It is mounted up front on the carbine with a QD sling swivel into a DD swivel adapter with limited travel – meaning the sling cannot swivel 360 degrees and get twisted like a pretzel. It is attached in the rear thru the sling slot molded into the VLTOR IMOD and not with a QD sling swivel because the attachment point in the rear is not limited travel.

Last but not least the V lightning bolt logo is etched into the lower receiver on the right hand side so as to designate the rifle is one of a limited edition of 250 carbines. This first edition will never be made again in this exact configuration; DD and I may make some other signature rifles but not setup like this one that is for sure.

Larry Vickers Signature Series Daniel Defense M4 Carbine

So there you have it – the first ever Vickers Tactical carbine. I have resisted the urge to do one in the past and I wanted to make sure it was worth the wait. If my prototype is any indication I think you will dig it – I know I do.

Go to DanielDefense.com to order your Vickers Signature Series Carbine today.

About:
Larry Vickers is a retired career special operations soldier with 20-plus years of service to our country. A longtime 1st SFOD- Delta operational member, he was a key player in the small arms marksmanship expertise and weapons selection of that Unit. He brings a very unique set of skills to the market, and has a wide and varied background in the firearms industry.

Visit www.vickerstactical.com

Bye, Bye M4 Carbine

AmmoLand Gun News

Florence, Alabama - -(Ammoland.com)- It’s no great secret that the Army’s M4 carbine hasn’t exactly covered itself with glory in Iraq and Afghanistan.

As long ago as the 1960s, long before the M4, the issues with the M16 rifle version of the AR design were well known.

In Vietnam, the M16 quit functioning so frequently that many photos from the mid-60’s show soldiers and Marines with cleaning roods taped to their rifles to clear cartridge casings that failed to eject.

The root cause of the M16’s reliability issues were the Ljungmann direct impingement gas system that in the words of some, “vomits into its own mouth.”

The cure in Vietnam was heavy lubrication to keep the fouling soft coupled with frequent maintenance. After over 40 years as, the AR platform continues to be a “dirty” weapon and its reliability has only been worsened by the large scale changeover to 14.5 inch barreled M4.

(Actually, there are two versions of the M4 – the base M4 that is semiautomatic or three round burst capable and the M4A1 that is capable of full auto fire. The latter is used primarily by Special Forces, while the M4 is predominantly used by “Big Army.”)

The issues inherent with the M4 were long ago reported by the first units to use the weapon – IE: Special Forces.

In fact, a 2000 SOCOM study regarding the M4A1 stated in part, “All…M16-based carbines and the M4A1 are fundamentally flawed.”1

Problems identified included failures to extract, broken bolts, burst barrels, cookoffs, loosened barrels and in extreme cases, blown receivers. In addition to these problems, both carbines have reliability issues in a desert environment engendered by the need to keep them heavily lubricated because of the fouling engendered by the direct impingement gas system. In the “sandbox” environment of Afghanistan and Iraq, the lubricant becomes a “dust magnet,” actually attracting the fine talcum powder like sand that seems to get into everything. When combined with the lubricant, the dust turns into a “goo” that brings cycling to a halt, which isn’t exactly what one wants or needs in a firefight. The same is true if the carbine is run dry, since it depends on lubricant to function.

HK XM8 Modular Assault System Rifle

The reports of malfunctions and the issues mentioned above led the Army to evaluate alternative carbines in 2007 in an environment as close as possible to that encountered in desert combat zones. Ten sample carbines of each of four candidates were test fired for a total of 6,000 rounds each. It isn’t our point here to go through the exact test procedures, but the test protocol was fairly close to “real world” operational conditions and when the dust settled (No pun intended.), the Colt M4 was dead last with 882 stoppages/malfunctions. The next worst, H&K’s 416 had only 233 disabling stoppages. The Mark 16 SCAR was almost in a dead heat with 226 stoppages. Best was the XM8 with just 127 stoppages. Of course, the XM8 program was long ago terminated by Congress because it had been concluded that it didn’t do anything significantly better than the M16 rifle, so just why the XM8 was even included except perhaps as a baseline is questionable.

By late 2008, the Army bureaucracy decided that what was needed was an entirely new carbine to replace the M4 family, although the problems with the M4 were restricted to the upper receiver that attaches to the lower receiver via two pins.

What this means is that the upper receiver can be replaced in a matter of seconds by simply pressing our the two retaining pins, dropping on a new upper receiver and pressing the pins back in to lock the new received in place.

POF-USA P416 14 11sx 223 Rifle

This is a VERY important point.
Special Forces long ago began solving the M4’s inherent issues by just dropping on a new upper receiver that eliminated the direct impingement gas system and replaced it with a gas piston and operating rod. This was Heckler and Koch’s HK416. But there was an issue with the HK 416 as well. Although not widely reported, the HK416s operating rod return spring that was in close proximity to the carbine’s chamber area could be damaged by heat. An alternative that was never formally procured by the military was Precision Ordnance Factory’s P416 that not only uses a piston and operating rod, but runs without any lubrication whatsoever. We know of at least one Special Forces Team that deployed to Afghanistan equipped entirely with M4A1 carbines with POF 416 upper receivers. One of the officers on this team, who must remain anonymous, informed us that the POF equipped carbines had virtually zero stoppages and weren’t affected by the dust. Informal feedback from other POF combat users indicates that the weapons deliver almost unbelievable levels of reliability and longevity. We have conducted long term testing of semiautomatic versions of the POF system in both .223 and .308 and can attest to the fact that it runs without lubrication of any kind and that the receiver remains remarkably clean and virtually free of fouling.

In November 2009 the Army invited 19 small arms manufacturers to an “industry day” in Washington, DC in an effort to see what industry was capable of producing. At this point what the Army will do about the M4 isn’t clear, but we believe that one point is worth mentioning – there really is no need for a completely new carbine like the Mk 16 SCAR, because whatever issues there are can be rectified without spending the millions needed for an entirely new weapon.

Vltor Weapons System’s Modstock EMOD Combo Kit - Flat Dark Earth

The dust, lubrication and heat problems can be resolved by purchasing the POF P416 upper receiver that just drops into place. If a new caliber like he 6.8mm SPC is wanted, that is as easy as changing upper receivers as well. If users don’t like the cheek weld on the M4’s collapsible stock, stocks with cheek rests better than the fixed stock M16 are available. An example is Vltor Weapons System’s Modstock. Again, we have used the Modstock extensively on our personal POF carbine that rides in the trunk of our cruiser at the police department and recommend it to anyone who has an M4 type carbine, whether semi- or full auto. You’re right, gentle (or not so gentle) reader, we like POF carbines and Vltor accessories, but we have the opportunity to shoot a LOT of AR-type carbines and these are the ones we prefer over all others.

The bottom line is that the M4/M4A1 as currently configured isn’t going to be around much longer. As the eight year old SOCOM study stated, the design is “fundamentally flawed” and should long ago have been redesigned or replaced.

An New Carbine Is Not Necessary
To reiterate, an entirely new carbine is neither necessary nor desirable. The M4 design is well known and spare parts and suppliers are in place. An entirely new weapon would necessitate not only new weapons production, but new spare parts production as well, with duplicate parts inventories being necessary for years to come. Moreover, the M4/M4A1’s issues are capable of being rectified in a fraction of the time and at a fraction of the cost of an entirely new weapon. (Related News: See also Adams Arms AR15FIX Retro-Fit Piston)

Finally, the technology already exists to upgrade the M4/M4A1 to the levels of reliability that our nation’s soldiers deserve. It has been said that getting anything done in the Army bureaucracy is like mating elephants – it is done at very high levels with a lot of bellowing and it takes two years to get anything done. The Army bureaucracy long ago identified the M4’s problems, the bellowing has been going on for over eight years and our soldiers are still plagued with the same “fundamentally flawed” carbine they had when the problems were identified. It’s very close to a national scandal that many of our troops are forced to obtain high reliability upper receivers like the POF 416 on their own!

It’s high time for the Army bureaucracy to quit dithering and get something done to give our troops the weapon they need and deserve!

Charlie Cutshaw

About the Author:
Charlie Cutshaw is a well-known U.S. authority on military small arms and has an extensive experience as a former U.S. Army infantry, ordnance ammunition and intelligence officer. He is an editor for Jane’s Infantry Weapons and contributing author for other military and firearms publications. When not writing Charlie is a part time police officer in Alabama. Si vis pacem, para bellum MOLON LABE!

Bushmaster MOE M4 Type Carbine with Telestock (Foliage Green)

Bushmaster Firearms

Windham, ME --(Ammoland.com)- Bushmaster’s MOE M4-Type Carbine is an exciting addition to the growing line of Bushmaster AR15 style rifles.

The MOE M4-Type Carbine comes factory enhanced with an array of Magpul aftermarket accessories.

Enhancements include a Magpul MBUS flip-up rear sight, a Magpul adjustable butt sock with a strong A-frame design and a rubber butt pad, a Magpul MOE polymer hand guard and a Magpul pistol grip that will accept Mission Adaptable (MIAD) accessories and the MOE enhanced trigger guard.

The rifle is shipped with one 30 round Magpul PMAG. The Magpul accessories on every MOE M4-Type Carbine are available in either black, flat dark earth or foliage green.

The MOE M4-Type Carbine has a receiver length picatinny optics rail that will allow an optical sight to be mounted to co-witness with the Magpul flip-up rear sight or mounted in a traditional format if the Magpul rear sight is removed.

All Bushmaster MOE M4-Type Carbines are shipped with a lockable hard case, an operator’s safety manual, an orange safety block and a black web sling. Bushmaster’s one year warranty is included.

Bushmaster MOE M4 Type Carbine with Telestock (Foliage Green)

About Bushmaster Firearms
Bushmaster Firearms International, LLC (BFI) is the leading supplier of AR15/M16 type rifles in the United States for Law Enforcement, security and private consumer use. Headquartered in Windham, Maine, with additional facilities in Dallas, Georgia and Lake Havasu, Arizona, BFI supplies aluminum and advanced carbon fiber-based rifle platforms in calibers ranging from 5.56mm/223 to 50BMG. These and associated accessories manufactured by BFI meet the tactical rifle needs of US customers as well as Military, Law Enforcement and Security clients from over 50 countries worldwide. Visit our web site at www.bushmaster.com

Otis Technology TRS Turned Rail System

Otis Technology Gun Care

LYONS FALLS, NY --(AmmoLand.com)- Otis Technology, the world leader in gun cleaning, introduces a new standard in rail system accuracy.

The TRS rail system is machined with a unique patent pending process that machines all critical alignment surfaces on a single rotating axis. This innovative approach combined with extreme tolerance control makes the TRS™ the world’s most accurate rail system.

The TRS™ is machined out of T6061 aluminum and finished in a type III hard coat black anodized surface. The rugged free floating design is mounted with a robust concentric locking ring so it will not vibrate loose or change zero, even under the most extreme conditions. Large ventilation ports allow for greater heat dissipation.

The TRS™ is exactly what you would expect from Otis, a new standard of performance built with no compromises. As all Otis products, the TRS ™ is destined to be the premier choice for operators, law enforcement and firearms enthusiast worldwide.

The TRS™ Tuned Rail System fits all CAR-15 / M-4 carbine variants and comes with a lifetime warranty. The system integrates with virtually all Picatinny rail attachments. The rail is laser engraved with position number indicators.

Otis Technology is known for manufacturing the most advanced gun cleaning systems available. The superior Breech to Muzzle ™ design combined with unmatched quality has positioned Otis as the standard issue gun care system for the US Military. Founded in 1985, Otis Technology is now celebrating its 25th Anniversary.

About:
Otis Technology Online Catalog. The World’s Finest Gun Care Systems and firearms maintenance supplies. A complete line of gun cleaning supplies for any type of firearm. Gun cleaning supplies, Rifle cleaning kits, pistol cleaning kits, shotgun cleaning kits, gun cleaning brushes, gun cleaning patches, gun cleaning solvent an so much more. Visit: www.otisgun.com

AcuSport

BELLEFONTAINE, Ohio – -(AmmoLand.com)- AcuSport Corporation, one of the leading distributors of outdoor and shooting sports products in the nation, introduces LWRC International to their extensive line of shooting sports products. LWRC produces a complete family of M6 short-stroke, gas-piston operated rifles and carbines.

These rifles are the product of extensive engineering and have resulted in a patented, state-of-the-art operating system. The benefits of the short-stroke gas-piston system include increased venting, handling, lighter recoil and a reduction in muzzle rise.

“The LWRC product line is a great addition to the AcuSport family of products.” said Chris Cole, AcuSport Director of Merchandising. “This high-end line of products will add to the versatility of our tactical offering and provide excitement and additional sales opportunities for our customers.”

AcuSport will carry the M6, M6A1, M6A2, M6A3, Personal Security Detail (PSD) and SABRE models in their growing tactical accessory line up. First shipments of LWRC products are scheduled to ship from AcuSport during the week of August 17, 2009. Retailers can purchase LWRC rifles by contacting their AcuSport Sales Professional or by placing their order online at www.acusport.com.

About:
Based in Bellefontaine, Ohio, AcuSport Corporation is a nationwide distributor of shooting and hunting products with regional sales offices in Pennsylvania, Georgia, Minnesota, Texas, Montana and California.

AR-15/16 M4 CARBINE Parts

Brownells.com

Brownells.com - -(AmmoLand.com)- There’s a bit of relief for the shortage of AR-15 barrels, at least at Brownells. The Iowa-based supplier of gunsmithing tools and firearm accessories has just released their own, 16″ M-4-style barrel for the popular rifle.

The AR-15/M16/M4 Carbine Barrel (#080-000-681) is made of 4140 chrome moly steel, hardened to Rc 26-33 and stress relieved. It’s 16″ long with a 1 in 7 twist and ½”-28 threads for a flash hider. M4 feed ramps provide reliable feeding into the 5.56 NATO chamber. A dark gray, Parkerized finish helps prevent rust.

“Brownells is committed to stocking the parts our customers need. When we see people having trouble getting a certain product, we work with our existing suppliers, or find new sources, to make those parts available,” said company President Pete Brownell.

No front sight housing/gas block or flash hider/muzzle brake is supplied. That lets the user select the exact components they want without paying for parts that will only end up in a drawer full of other unused pieces.

About:
Brownells is the world’s largest supplier of firearm parts, gunsmithing tools, reloading equipment and accessories. Stocking more than 30,000 items, the company supplies armorers, gunsmiths, and shooters worldwide. All of their products are backed by a 100% satisfaction, unconditional, lifetime guarantee. For more information, or to place an order, call 800-741-0015 or visit Brownells.com

Browning AR34F Tactical Gun Safe

Browning Firearms

Morgan, Utah - -(AmmoLand.com)- The AR34F Breaks New Ground. Browning has been the industry leader and innovator in gun safes for over 27 years.

But there has never been a Browning ProSteel safe like the all new AR34F Tactical safe. In fact the AR34F leads in ground breaking innovation and is the first Tactical gun safe ever.

And it is perfect for the person who has special guns — tactical guns — that have special storage requirements.

On the outside it has the tactical look you like — black and textured — with the unique look of overhead and side racking. On the inside it is specially designed to handle the odd shapes and sizes and special storage requirements of tactical guns. That means its made for shorter length rifles with different shapes, unique optics and unique buttplate-to-magazine-to-muzzle dimensions. Finally a practical way to secure your AR, M-16, M4, AK, FAL, FNAR, SCAR, or whatever, in a way that makes sense and doesn’t waste valuable space. It is not a beginner’s safe. If you have the goods that need protection from theft and fire, this gun safe excels. If you like the look of black guns, then this gun safe rises to the top.

The AR34F – Tactical looks and an interior that will conveniently hold both tactical and sporting guns.

MORE FEATURES SPECIALLY CONFIGURED FOR TACTICAL GUN OWNERS

• 12-gauge steel body
• 1″ formed steel door
• Force Deflector Locking Mechanism
• Hardened steel pin lock protection
• 1″ chromed locking bolts
• DPX Storage System
• UL tool attack listed
• S&G electronic lock
• Elevated floor to facilitate removal of guns
• Door Frame – U-Channel reinforced steel
• 1200°/60 min.
• Additional Barrel Rests – shorter configuration allows for convenient storage of shorter overall length tactical guns.
• Tactical Design Features – The tactical gun owner gets a safe that matches the looks of his guns.
• New interior configuration conveniently holds both tactical and sporting guns
• External Accessory Rack – conveniently hang your gear outside the safe.
• Additional internal storage features – side mounted hooks and tray for top shelf slot
• Reinforced patterned rubber bottom panel
• Picatinny rail accessory – mounts on shelves
• Short gun capacity – interior and door

• 1200° F/60 min. fire protection
• Three layers of 1/2″ fire-resistant insulation in the body and door
• Palusol® expanding fire seal

About:
Browning…The Best There Is in shooting and hunting sports. Check out our full line of rifles, shotguns, pistols, archery, clothing, footwear, shooting accessories, gun safes, knives, and flashlights.

Taos Industries

Iraq - -(Army-Technology.com)- The Republic of Iraq has awarded a $30.2m contract to Taos Industries of the US for 33,400,938 rounds of non-standard ammunition.

Non-standard ammunition refers to non-Nato standard weapons such as the Soviet calibre 7.62×39 used in AK-47-type assault rifles, which Iraq is replacing with the American 5.56mm M4 carbine.

Earlier this year Taos Industries, a subsidiary of Agility Logistics, also received a non-standard ammunition contract from the Afghan Army.

About:
Founded in 1991, Taos Industries is in the business of supporting the U.S. government and its allies by providing global procurement services for commercial and military spare parts and systems. We specialize in the procurement of military systems and equipment and spare parts of foreign origin. Taos provides complete procurement services for its customers from the identification of qualified foreign manufacturers and sources of supply, to contracting, financing, quality assurance, inspection, packaging, safety certification and shipping. Taos also provides full spectrum logistical services in the areas of base operations, transportation, warehousing, and material management.

Daniel Defense M4 Rifles back in Stock!

AimSurplus Guns & Ammunition

Middletown, OH - -(AmmoLand.com)- Just Arrived! A New shipment of Daniel Defense .223/5.56 semi-automatic M4 Carbines.
This Rifle was engineered with the tactical professional and shooting enthusiast in mind.
Built to redefine the benchmark in small arms performance, this precision-crafted firearm will perform faithfully in any Military, Law Enforcement, Homeland Security, and or Home/Personal Security environment.

• ” Mil. Spec. Lower Receiver with Enhanced Magazine Well
• ” Mil. Spec Upper Receiver with Index Marks and A4 Feed Ramps
• ” “16 4150 MP Tested, Chrome Lined, 1:7, M4 Profile Barrel
• ” A2 Birdcage Flash Hider
• ” Mil-Spec MP Tested Bolt and Properly Staked Gas Key
• ” Daniel Defense A1.5 BUIS and Pinned “F” Marked Front Sight Base
• ” Daniel Defense Omega X Rail
• ” Magpul MOE Buttstock & Mil. Spec. 5 Position Receiver Extension
• ” Daniel Defense Vertical Foregrip
• ” Custom Daniel Defense Full-Latch 30ft Impact Plastic Case

Not for sale in CA,CT,MA,NJ,& NY.

$.01 Cent Shipping on this Item!* *48 States, This item only.

Price: $1,549.00 (In Stock Now While Supplies Last!)

About:
AimSurplus is the web’s biggest surplus ammunition and surplus firearms dealer in the USA and maybe the world. We offer great prices on top quality ammo in bulk and low low prices on unquie used firearms and parts. Visit us on line at Aimsurplus.com for more info.

Brownells.com

Brownells - -(AmmoLand.com)- The RIGHT way to repair and service the AR-15/M16/M4! These kits contain the tools the gunsmith or armorer needs to perform full maintenance and repairs of these rifles in the field or shop. Each tool is designed to do its job in the simplest, most effective manner to maintain and repair these guns correctly – and save time doing it.

Standard Kit contains the tools needed to work on the AR-15 and the M16A1 through A4.

Premium Kit contains all the tools of the Standard Kit, plus an additional 11 items necessary to repair and maintain the M4 carbine as well.

Both kits come in a custom-fitted, hard-side tool box that’s made from nearly indestructible molded polymer resin and meets mil-spec MIL-C-4150 and ATA specifications. The Standard kit’s foam inserts are pre-cut with spaces for the M4 tools, so you can turn it into a Premium Kit anytime simply by adding the Upgrade Kit.

Brownells AR-15 Tool Kit

The Premium Kit Includes all of the following:

1 – 12 OUNCE BALLPEEN HAMMER – Heavy enough to drive out stubborn tapered front sight retaining pins, yet light enough for installation/removal of solid and roll pins.

SPECS: 12-1/4″ (31.1cm) long overall. 1 lb. (454 g), 6 oz. (170 g) total. Head is 3-3/4″ (9.5cm) long. 1-3/16″ (3cm) diameter flat face. 1″ (2.5cm) diameter peen.

2 – 3/4″ PLASTIC/BRASS HAMMER – For the thousand and one instances when a part needs a gentle tap during assembly/disassembly. Great when fitting stocks.

SPECS: 3/4″ (19mm) diameter faces. 10″ (25.4cm) hickory handle. Weighs approximately 4 oz. (113 g).

3 – FIRING PIN PROTRUSION GAUGE – Essential for properly measuring the amount of the firing pin projecting through the bolt. Too little causes misfires; too much, pierced primers.

SPECS: Steel. 2″ (5.1cm) long, 1/4″ (6.3mm) wide.

4 – 1/2″ SQUARE DRIVE TORQUE WRENCH – Necessary to apply the manufacturer’s recommended 30 foot pounds of torque to the barrel nut when installing barrel on receiver. Self-limiting design “clicks” at torque setting.

SPECS: Chrome-plated steel. 17-1/8″ (43.5cm) long. 1″ (2.5cm) diameter handle. 30-150 ft. lb. range.

5 – BROWNELLS SHOP APRON – High quality, durable apron keeps clothing clean and free of grease, oil, and carbon.

SPECS: 39-1/2″ (100.3cm) long. 30-1/2″ (77.5cm) wide. Upper and lower pockets. Ties: each 27-1/2″ (69.8cm) long. Neck strap: 21-1/2″ (55.2cm) long.

6 – VISE JAWS – The ONLY way to hold a barrel without damage. Non-marring aluminum with milled grooves to accept both standard or heavy barrels. Standard kit only. Replaced by #36 in Premuim Kit.

SPECS: 3-5/8″ (9.2cm) L, 2-1/4″ (5.7cm) W, 2-7/8″ (7.3cm) H. 2 lb. (907 g), 5 oz. (142 g). Cast Aluminum.

7 – PARTS BOXES – A durable, break-resistant container for parts, smaller tools, and other loose items. Kit includes two boxes; replacement boxes sold per each.

SPECS: 11″ (27.9cm) L x 6-3/4″ (17.1cm) W. 6 compartments.

8 – BROWNELLS BENCH MAT – Neoprene rubber mat provides a smooth, non-marring, oil-and solvent resistant work surface no matter where you are.

SPECS: 17-1/2″ (44.4cm) long. 12″ (30.5cm) wide. 3/16″ (4.7mm) thick.

9 – 10-1/2″ LONG, 1/2″ SQUARE DRIVE HANDLE – Use with AR-15/M16 Combination Wrench to loosen the barrel nut and remove barrel. Long enough to provide ample leverage.

SPECS: Chrome-plated steel. 10-1/2″ (26.7cm) long. 13/16″ (20.6mm) diameter handle.

10 – MAGNA-TIP® #81 HANDLE – Preferred by many for general use, shank is long enough to reach inside the pistol grip. Use with Stubby Handle to remove Pivot Pin.

SPECS: Overall length 8″ (20.3cm).

11 – MAGNA-TIP® STUBBY HANDLE – Use with various MAGNA-TIP® bits on butt plate screws, windage screw, AR-15 pivot pin head, etc. When removing the pivot pin, use Stubby Handle with the “RED” bit on the left side of the pin and the regular handle with the 445-6 bit on the right side.

SPECS: 2-1/2″ (6.3cm) overall. 1-7/8″ (4.8cm) handle, 51/8″ (15.9mm) shank.

12 – SNAP RING PLIERS – For removal and installation of the handguard snap ring. Extra tips included for other uses.

SPECS: Blued steel with vinyl dipped handles. Tip sizes – Straight, .045″ (1.1mm); Straight, .060″ (1.5mm).

13 – BARREL NUT ALIGNMENT GAUGE – Fits into the end of the bolt carrier key to ensure that the barrel nut is properly aligned during installation of AR-15/M16 barrel. Improper alignment can damage the bolt carrier key and/or the gas tube.

SPECS: Steel. .178″ (4.5mm) diameter x 3″ (7.6cm) long.

14 – 5.56mm (.223) HEADSPACE GAUGE – Measures maximum headspace. Essential for checking out rifles that have seen heavy use or that have been rebarreled. Not a regular “field” gauge but made to Colt factory dimensions.

SPECS: 1.65″ (4.2cm) overall (this is NOT the “Headspace” dimension). .3655″ (9.3mm) diameter.

15 – BROWNELLS #250 CHAMBER MIRROR – Highly polished, steel mirror drops into the chamber to aid in detailed inspection. Will not move beyond throat.

SPECS: 1-3/16″ (3cm) long.

16 – CLEANING ROD SMALL ARMS (w/ADAPTER) – Threaded for 8-36 U.S. military cleaning brushes; includes adapter that accepts commercial 8-32 brushes and accessories.

SPECS: Steel, parkerized finish. .204″ (5.2mm) diameter rod. 4 sections, each 7-3/8″ (18.7cm) long – 3 thread into 4th handled section. Overall length, with Jag, 29-3/4″ (75.6cm). Adapter is 3-1/4″ (8.2cm). Jag is 2-3/4″ (7cm) with oval slot.

17 – COMBINATION WRENCH – Removes the barrel nut. Removes/installs flash suppressor and lower receiver extension.

SPECS: Blued steel. 5″ (12.7cm) lg x 2″ (5cm) w x 1/4″ (6.3mm) thick.

18 – BROWNELLS ROLL PIN PUNCHES – The ONLY way to properly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing.

SPECS: #1, 1/16″ (1.6mm) x 2-3/4″ (7cm) L; #2, 5/64″ (2mm) x 3-1/4″ (8.2cm) L; #3, 3/32″ (2.4mm) x 3 ½” (9cm) L; #4, 1/8″ (3.2mm) x 4″ (10.2cm) L; #6, 3/16″ (4.8mm) x 4-1/2″ (11.4cm) L.

19 & 29 – CARRIER KEY BIT KIT – Two hex bits for installing the bolt carrier key socket head screws, plus an adapter that will connect the Carrier Key Bits to the 3/8″ Drive Torque Wrench. Small and large bits handle both early and late guns.

SPECS: Heat-treated steel. 185-2 Bit – 1/8″ (3.2mm) hex bit. 185-10 Bit – 9/64″ (3.6mm) hex bit. 1″ (2.5cm) long. Adapter – Heat-treated steel with retention clip adapts 3/8″ square drive to accept 1/4″ shank hex bits.

20 – BROWNELLS ROLL PIN HOLDERS (STARTER/SETTER PUNCHES) – Easily hold even the smallest roll pins for positioning. Complete installation with Brownells Roll Pin Punches.

SPECS: 1/8″ (3.2mm), 3.5mm (.138″) diameter – 5″ (12.7cm) long. 3/32″ (2.4mm), 5/64″ (2mm), 1/16″ (.40mm) diameter – 4-1/2″ (11.4cm) long.

21 – BOLT CATCH PIN PUNCH – Specially made, slab-sided punch clears left side of the magazine well allowing bolt catch pivot pin to be removed by driving it to the rear.

SPECS: Steel. 4″ (10.2cm) long. 3/32″ (2.4mm) diameter tip.

22 – STARRETT 1/8″ PUNCH – A best-quality punch for removing solid pins such as those on the hammer or trigger.

SPECS: 4″ (10.2cm) long. 1/8″ (3.2mm) diameter tip.

23 – TAPER PIN STARTER – This tool’s radiused face matches the end of the front sight housing taper pin to prevent damage during removal. The taper pin is removed by driving from left to right; the small end is on the left side of the barrel, the large end is on the right side! .

SPECS: 4″ (10.2cm) long. 3/32″ (2.4mm) diameter tip

24 – STARRETT 1/4″ PUNCH – Facilitates removal of the takedown pin and safety lever/fire control selector.

SPECS: 4″ (10.2cm) long. 1/4″ (6.3mm) diameter tip.

25 – STARRETT 5/32″ CENTER PUNCH – Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier.

SPECS: 4″ (10.2cm) long. 5/32″ (4mm) punch, 3/8″ diameter body.

26 – PIVOT PIN DETENT DEPRESSOR – Depresses spring-loaded detent to free the pivot pin for removal. Virtually impossible without this tool. Does not fit Colt Mfg. AR-15.

SPECS: Blued steel. 1-7/8″ (4.8cm) long.

27 – PIVOT PIN DETENT INSTALLATION TOOL – Makes installation of the M16 pivot pin and its detent faster and easier. Prevents loss of detents. Guides detent and spring into place and serves as a slave pin when installing the pivot pin.

SPECS: Blued steel. 1/4″ (6.3mm) diameter. 2-1/2″ (6.3cm) and 1-1/2″ (3.8cm) long “legs”.

28 – BROWNELLS BROKEN SHELL EXTRACTOR – Fastest way to remove the front portion of a separated 5.56mm (.223) case without field stripping. Engages the rim of case mouth and pulls case from the chamber when charging handle is pulled back. Adjustable to ensure complete engagement of case mouth.

SPECS: Blued steel. 2″ (5cm) long.

30 – 445-6 BIT – Use on the AR-15 windage screw, pistol grip screw, and right side of the pivot pin.

SPECS: 1-1/2″ (3.8cm) long. Approximately .360″ (9.1mm) diameter x .055″ (1.4mm) thick.

31 – RED BIT – Use on left side of the pivot pin.

SPECS: 1-1/2″ (3.8cm) long. Approximately .398″ (10.1mm) diameter x .078″ (1.98mm) thick.

32 – LB BIT – Use on the butt plate screws.

SPECS: 1-1/2″ (3.8cm) long. Approx. .428″ (10.9mm) diameter x .070″ (1.8mm) thick.

33 – SIGHT TOOLS – Quickly adjust front and rear sights. A1 fits older AR-15s and M16s, A2 fits M16A2 configuration rifles.

SPECS: Blued steel. 13/8″ (3.5cm) long x 3/4″ (19mm) diameter.

34 – 3/8″ SQUARE DRIVE T-HANDLE TORQUE WRENCH – Precisely calibrated to apply the required 40 foot pounds of torque to tighten the two socket-head cap screws on the bolt carrier key.

SPECS: Chrome-plated steel. 3-1/2″ (8.9 cm) long. 4-1/8″ (10.5cm) wide handle.

35 – MIL-SPEC TOOL BOX – Heavy-duty case with four drawers, top compartment, and double latches. O-ring seals keep dust and moisture out; built-in wheels and a sturdy, retractable pull handle for easy transport. Extra storage space for parts, manuals, etc.

SPECS: 24″ (61cm) wide, 18″ (45.7cm) high, 15″ (38.1cm) deep. 38 lb. wt.

36 – ACCU-GRIP BARREL VISE JAWS – Massive aluminum jaws lined with space age, polyurethane elastomer grip tight without marring the barrel. Grooves for both standard and heavy barrel contours. Replace Vise Jaws in Standard Kit.

SPECS: Machined aluminum with blue polyurethane elastomer lining. 5″ (12.7cm) wide, 1″ (2.5cm) thick, 3-7/8″ (9.8cm) long. 2 lb. 6 oz. (1 kg) wt. Fits 4″ and wider vises.

37 – FRONT SIGHT BENCH BLOCK – Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec AR-15 rifles and carbines.

SPECS: 4″ (10.2cm) dia. x 1-11/16″ (4.3cm) high.

38 – UPPER RECEIVER ACTION BLOCK – Tough Rynite block and insert surround the entire upper receiver to let you tightly clamp an A1, A2, or standard flattop receiver in a large bench vise for barrel removal/installation without twisting the receiver or damaging barrel detent pin and receiver detent notch.

SPECS: Block – 2.5″ (6.3cm) thick, 3.5″ (8.8cm) wide, 4.5″ (11.4cm) high. Insert – 8″ (20cm) long, 1″ (2.5cm) diameter.

39 – LOWER RECEIVER VISE BLOCK – Unbreakable, high-density urethane vise block inserts into magazine housing and takes all the clamping force, so the lower receiver won’t be damaged or distorted. Magazine catch locks to the block.

SPECS: 5″ (12cm) high, 2-1/4″ (5.7cm) wide, 3/4″ (19cm) thick.

40 – HANDGUARD REMOVAL TOOL – Takes the fumbling and frustration out of installing or removing AR-15, M16A1/A2, and AR-10 handguards. Rubber coated steel won’t mar gun.

SPECS: 11-1/4″ (28.6cm) long.

41 – MAGAZINE CATCH INSTALLATION & REMOVAL TOOL – Compresses the spring for easy removal of the magazine catch.

SPECS: High-impact plastic, black.

42 – TAKEDOWN PIN REMOVAL TOOL – Drives out the front and rear take down pins without marring the metal.

SPECS: High-impact plastic, black.

43 – BOLT EJECTOR TOOL – Steel clamp captures the bolt head, and turnscrew depresses the ejector for faster, easier removal and installation of plunger-style ejectors.

SPECS: Steel, blued. Plastic handle.

44 – MAGAZINE FEED LIP TOOL – Bends the feed lips back into place, so they guide the cartridge body properly to prevent problems and jams caused by bent magazine feed lips.

SPECS: Steel shank, blued; plastic handle. 5-1/2″ (14cm) long.

45 – GAS TUBE WRENCH – Clamps around the fragile gas tube to prevent damage during both removal and installation.

SPECS: Steel, blued. 6″ (15.2cm) long.

46 – BOLT CARRIER CARBON SCRAPER – Removes hard-to-get-at carbon buildup without damaging the bolt carrier. Solves cycling problems caused by carbon deposits in the bolt recess.

SPECS: Steel reamer, plastic handle. 6-1/2″ (16cm) long.

47 – BUTTSTOCK TOOL – Combines several tools into one for taking apart M4-style collapsible buttstocks. Includes pins for old- and new-style receiver extension nuts.

SPECS: Steel, black. 7″ (17.8cm) long.

About:
Brownells is the world’s largest supplier of firearm parts, gunsmithing tools, equipment and accessories. Stocking more than 30,000 items, the company supplies armorers, gunsmiths, and shooters worldwide. All of their products are backed by a 100% satisfaction, unconditional, lifetime guarantee. To order, or for more information, call 800-741-0015 or visit Brownells.com

Brought to you by - AMMO LAND.COM – The Free Press Release Service for the Shooting Industry! www.AmmoLand.com .

Submit Gun, Ammo and Shooting Related News at Ammo Land.com .