Lipsey's Exclusive Ruger Single Ten 22 LR 4-5/8" Blue Revolver

Lipsey’s Firearms

Baton Rouge, Louisiana --(Ammoland.com)- The Ruger Single Ten is the first major change to Ruger’s single action rimfire line in some time.

Until now, Ruger has only offered the Single Ten in stainless steel. This Lipsey’s Exclusive is the first blued version.

We kept the same slim Gunfighter grips and Williams fiber optic sights. The lighter weight aluminum gripframe reduces the overall weight of the gun by 5 ounces.

We decided to go with a steel ejector rod housing since it looks nicer mated up to the barrel. If one wanted to drop another ounce or so off of the gun, they could replace it with an aluminum version. I also wanted to go with the 4-5/8″ barrel as we have done very well with this length.

If you like the idea of a 10 shot single action Ruger 22LR and prefer a blue gun, this is the one for you.

About:
Lipsey’s is the nation’s leading wholesale firearms distributor selling only to FFL holders. Lipsey’s has been a firearms distributor since 1953 and currently services FFL licensed firearms retailers in all 50 states. This exciting new exclusive 44 Special Flattop will complement Lipsey’s extensive line of special make-up and limited edition firearms. To find out more about these and other Lipsey’s offerings please visit www.lipseys.com

Smith and Wesson

SPRINGFIELD, Mass.--(Ammoland.com)- Smith & Wesson Corp. announced today that the Company has added a new revolver to its legendary Classic line with the introduction of the Model 586.

Deemed the Distinguished Combat Magnum when first introduced by Smith & Wesson in 1980, the new revolver reunites collectors and .357 Magnum aficionados with one of the most sought after law enforcement firearms of its time.

Manufactured with a carbon steel frame and cylinder along with a blue finish, the Classic Model 586 harkens back to an era when revolvers were predominately worn on the hips of law enforcement officers. As with the original, the new Classic revolver is chambered for six rounds of .357 Magnum®/.38 S&W Special. Available with a 4-inch or 6-inch barrel configuration, the Model 586 features a smooth single-action and a crisp double-action trigger pull that is the hallmark of every Smith & Wesson revolver.

On top of the frame, the revolver features an adjustable white outline rear sight and a red ramp front sight for a clear, precise sight picture. Much like the original, the Classic Model 586 is standard with an authentic square-butt design and is packaged with checkered wood grips containing the Smith & Wesson medallion. The retro-revolver is also standard with a serrated back strap for improved firearm control when shooting heavy magnum loads.

“The original Model 586 is perhaps best known for its extensive use as a law enforcement commemorative model,” said Tony Miele, Business Manager of the Smith & Wesson Classic line.

“Selected by highway patrol and conservation agencies as an ideal limited edition and anniversary model, the Model 586 has amassed several years of service both in the United States and overseas. Highly collectible and duty-proven, the original Model 586 offered law enforcement a reliable firearm for handling heavy Magnum cartridges.”

Today, collectors, retired officers and recreational shooters are able to relive history through the introduction of the Classic Model 586. Old school in nature, but ready to take on the demands of today’s shooter, the newest Classic revolver brings together two worlds in a way that is uniquely Smith & Wesson.

About Smith & Wesson
Smith & Wesson Holding Corporation (NASDAQ Global Select: SWHC) is a U.S.-based leader in firearm manufacturing and design, delivering a broad portfolio of quality firearms, related products and training to the global military, law enforcement, and consumer markets. The company’s brands include Smith & Wesson, M&P and Thompson/Center Arms. Smith & Wesson facilities are located in Massachusetts and Maine. For more information on Smith & Wesson, call (800) 331-0852 or log on to www.smith-wesson.com.

Taurus 445 Ultra Light Revolver

Taurus Firearms

MIAMI --(Ammoland.com)- Miami, FL –-(Ammoland.com)- Taurus, a leader in the innovation and manufacturing of firearms, announces the availability of their new 405 Revolver and 445 Ultra-Lite Revolver.

The 405, Taurus’ first revolver chambered in .40 S&W, features a lightweight frame that weighs just 29 ounces. Included with the 405 Revolver are stellar clips for quick and easy loading and unloading.

The new 445 Ultra-Lite answers the call for a revolver in the popular .44 Special round. The 445 features an Ultra-Lite frame that weighs only 22 ounces. This lightweight revolver is an aggressive wheel-gun that delivers superior accuracy and stopping power without the heft or bulk of most large caliber revolvers.

Each revolver’s barrel measure 2 inches, with an overall length of 7 inches. Both 5-shot revolvers are available in a blue or matte stainless finish and are outfitted with Taurus’ exclusive Ribber Grips that reduce felt recoil and ensure a more positive hold.

Like all Taurus firearms the 405 Revolver and 445 Ultra-Lite come standard with the unique onboard Taurus Security System® that allows users to securely lock the gun using an inconspicuous key-lock.

405 Revolver

• .40 S&W
• SA/DA
• Medium Frame Revolver
• 2 inch
• 7 inch
• Blue or Matte Stainless
• Fixed
• Ribber Grip
• 29 oz.
• $477-$523

445 Ultr a-Light

• Caliber:.44 Special
• Action:SA/DA
• Frame:Medium Frame Ultra-Lite
• Barrel Length: 2 inch
• Overall Length: 7 inch
• Finish:Blue or Matte Stainless
• Sights:Fixed
• Grips:Ribber Grip
• Weight: 22 oz.
• MSRP:$508-$539

Taurus 405 Revolver Stainless Steel

About Taurus:
Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Forjas Taurus, S.A. has become a diversified, international company celebrating its resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. Taurus brand firearms manufactured by Forjas Taurus are imported into the U.S. and serviced by Taurus International Manufacturing, Inc. For additional information about Taurus, visit www.taurususa.com. High-resolution images are available at www.taurusdownloads.com.

MKS Rhino Revolver 20D

Virginia Citizens Defense League

Covington VA --(Ammoland.com)- Here is my personal experience with the Chiappa Rhino snubby (I have two – one with a black finish and one with a brushed nickel finish). Your mileage may vary.

I’m normally not much of a revolver guy, but I was intrigued by the concept of the Chiappa Rhino revolver, which was even more interesting after I watched a video of the gun being shot. I held one in my hand at the last NRA convention in Pittsburg, PA and really liked how it felt and pointed.

What’s unique about the Rhino is that it fires from the BOTTOM cylinder. That means the barrel is much lower on the frame and more exactly in line with your hand. The net effect is that the recoil comes straight back and is not leveraged by being above your hand, like other revolvers. Consequently the muzzle flip is miniscule, even with full power .357 magnums fired with one hand!

The felt recoil is also mild, thanks to the angle of the grips and the direction of the recoil.

The gun is unexpectedly light. Virtually everyone who has picked up one of my 2 inch Rhino snubbies is visible surprised at its weight, or lack thereof, actually.

The grips are very comfortable and the gun comes up to a natural point-of-aim, unlike many revolvers I’ve shot. To keep the gun slender, the cylinder has flattened sides where each chamber is located.

The double-action trigger is smooth, but long and a little heavy. I would prefer a much lighter double-action trigger, but it is workable and the single-action trigger is excellent.

There is no visible hammer on the gun. Where you would expect to find a hammer, there is a hammer-like “cocking lever.” All it does is cock the gun and then returns to its forward position. To remind the shooter that the gun is cocked and has a light trigger, an orange rod pops up slightly above the frame, near the cocking lever. The trigger is also placed in a tell-tale rearward position.

Pushing down on the cylinder latch opens the cylinder. It is a very natural and comfortable motion.

Because the gun shoots out of the lower cylinder, there are a couple of important things to keep in mind:

• You should NOT do a “thumb forward hold ” (weak hand thumb in front of the strong-hand thumb) on the gun as you do NOT want any part of your hand to be next to the cylinder gap. The blast sideways from a revolver can be powerful and the blast from the Rhino is guaranteed to get your attention. I always use a grip where both thumbs are side-by-side or one-over-the-other.
• If you want to fire a single round out of the gun, it should be placed at the 5 O’clock position and not 11 O’clock (as for a conventional revolver with a clockwise turning cylinder).

The Rhino holds six-shots of either .357 Magnum or .38 Special (.40 S&W and 9mm will be available in the future) and comes with a 2, 4, 5, or 6 inch barrel. The barrels all have a tall rib to make up for the low position of the barrel on the frame.

The cylinder, barrel insert, and the part of the frame directly behind the cylinder are all made of steel, while the frame is an aluminum alloy. The steel behind the cylinder is unusual and should give the revolver a longer life than other light-frame revolvers.

The snubby comes with a pancake holster and there is a leather inside-the-waistband and a Kydex paddle/belt holster available from Chiappa. Other holster manufacturers are also making holsters for it.

Some think the gun is ugly, but others, like me, think it looks pretty cool and futuristic.

The Rhino has either a black or a brushed nickel finish (called a White Rhino). The Rhino snubby is not inexpensive with a street value of around $700-$800, but it is an excellent gun for those who like the reliability of a revolver for self-defense and/or want a fun gun for a day at the range.

• Here’s the Rhino 200DS page on Chiappa’s web site: http://chiappafirearms.com/product/725
• White Rhino 200DS: http://chiappafirearms.com/product/726
• Here is a video of someone shooting the Rhino: http://tinyurl.com/7yybr5k

About:
Virginia Citizens Defense League, Inc. (VCDL). VCDL is an all-volunteer, non-partisan grassroots organization dedicated to defending the human rights of all Virginians. The Right to Keep and Bear Arms is a fundamental human right. Visit: www.vcdl.org

Heritage Manufacturing Rough Rider 9 Shot .22 LR & 22 Magnum combo revolver

Heritage Manufacturing

Opa Locka, FL --(Ammoland.com)- Heritage Manufacturing introduces our newest addition to the Rough Rider family, a 9 Shot .22 LR and .22 Magnum combo revolver.

Spend more time shooting the world’s most popular cartridge, the .22 LR or the .22 Magnum and spend less time stopping to load and unload.

Whether plinking, hunting, or target shooting, more firepower means the increased chance of hitting your intended target.

Like all Rough Rider Revolvers, our new 9 Shot series combine quality, dependability, accuracy, and firepower all into one and yet maintains the affordability that our customers have come to expect.

Available in 4.75″ or 6.5″ barrels and adjustable sights. 100% American Made. MSRP $289.99 – $349.99

About:
Heritage Manufacturing proudly manufactures an American Legend, the Western Single Action Revolver. This time tested, Western Tradition is now made affordable to shoot and purchase in a scaled down 22 LR and 22 Magnum size. Outstanding workmanship, accuracy, and quality is just the beginning of the value you receive with our Heritage Rough Rider Revolvers.

We honor and cherish our American Heritage and invite you to browse our site and learn more about us. An American Company … An American Family producing an American Legend … for the people by the people of Our Great United States of America. Visit; www.heritagemfg.com

Rugers New SP101 Revolver Chambered in.22 Long Rifle

Ruger Firearms

Southport, CT --(Ammoland.com)- Sturm, Ruger & Company, Inc. (NYSE: RGR) announces a new SP101 revolver chambered for the .22 Long Rifle, the most popular cartridge in the world.

The new .22 LR Ruger SP101 is true to Ruger standards of rugged reliability and perfect for those seeking a quality small frame revolver.

This new SP101 will appeal to firearm instructors and enthusiasts who want to practice and perfect their shooting skills, or just spend time plinking with inexpensive rimfire ammo.

“We were constantly receiving feedback from our customers asking us to produce the SP101 in .22 LR and, once again, we listened to those requests and have produced a very impressive package,” said Chris Killoy, Ruger Vice President of Sales and Marketing.

“Ruger re-engineered the SP101 to chamber eight rounds instead of the traditional six, improved the sights, and maintained the same classic features that SP101 owners know and appreciate,” Killoy added.

The 30-ounce double-action revolver is made of weather resistant stainless steel with a satin finish for longevity and good looks. The walnut grip panels inset in the one-piece rubber grip are checkered and engraved. The revolver features a fully adjustable square-notch rear sight and fiber-optic, square-post front sight. The 4.2-inch barrel features a half shroud covering the ejector rod.

Rugers New SP101 Revolver Chambered in.22 Long Rifle

For more information on the new SP101 revolver chambered for .22 LR, or to learn more about the extensive, award-winning line of Ruger pistols, rifles, revolvers and shotguns, visit Ruger.com or Facebook.com/Ruger. To find accessories for the SP101 in .22 LR or other Ruger firearms, visit ShopRuger.com.

Charter Arms Pit Bull Rimless Revolver

Charter Arms

Shelton, CT, --(Ammoland.com)- Charter Arms, manufacturer of American made affordable and reliable revolvers for forty-seven years, has released the world’s first .40 caliber Rimless Revolver.

Serious caliber enthusiasts will appreciate this model built on the same frame as the Charter Arms .44 Special.

The Pit Bull has a five shot; 2.3 inch barrel with a 416 stainless steel matte finish frame with Charters full rubber grip. With an overall length of 6 ¾ inches it weighs 20 ounces and has a fixed frame rear sight and a ramped front sight with a standard hammer. A DAO hammer is available upon request.

The Charter Arms .40 caliber provides a rimless cartridge extractor assembly and a method of use that solves a long felt need in the firearms industry. It provides a dual coil spring assembly located in the extractor to allow the insertion and retention of a .40 caliber cartridge in each chamber of the revolvers’ cylinder.

After firing, this unique system allows the shooter easy ejection of spent cartridges for immediate reloading. Charter Arms has taken the difficulty of rimless loading and ejection to the simplicity of the rimmed cartridge in the revolver industry.

Nick Ecker, president of Charter Arms, said, “The Pit Bull is the ideal revolver for law enforcement officers to use as their back up, because they can now carry a revolver that utilizes the same ammo as their sidearm. And for the .40 caliber enthusiast, it gives them the first revolver that shoots their ammo without utilizing moon clips.”

Founded in 1964, Charter Arms manufactures a full line of revolvers made by professional, skilled American craftsmen in Shelton, CT, in the heart of New England’s “Gun Valley.” Steeped rich in tradition with unmatched customer service, Charter Arms revolvers are consistently associated with personal protection because of their strength, reliability and accuracy. All Charter Arms revolvers are covered by a lifetime warranty.

For more information, visit www.CharterArms.com or call customer service at (203) 922-1652.

Proposed RFID shown on a Chiappa Revolver grip frame.

Chiappa Firearms

Dayton, OH --(Ammoland.com)-  Recently there has been some blogger activity (credibility always guaranteed??) concerning Chiappa Firearms putting a RFID (radio frequency identification) in Chiappa Firearms.

Yes, but Chiappa will not be using the RFID system for at least a year.

RUMOR: (known as blogosphere food): The erroneous information about some sort of “chip” was put out by a blogger who translated Chiappa (Italian) technical information incorrectly.

The incorrect translation and his interpretation came out as some sort of a GPS type tracking “chip” -which RFID isn’t as it cannot transmit anything-it has NO power source (unlike cell phones).

THE FACTS: Recently several Italian gun makers (not just Chiappa) decided to utilize RFID technology to improve manufacturing and provide more accurate inventory control. We guarantee this technology will proliferate to other gun makers world wide as it is so efficient for everything from production QC control to export/import varification. Other industries already use passive RFID technology such as on DVDs, sunglasses, clothes and even some food products for example.

Basically Chiappa RFID (again it is radio frequency identification) assists the manufacturing process, inventory control and shipping. The type of information on the RFID ties in the firearm and proof house verification; the latter is required by the Italian Government for all firearms made in Italy. Passive RFID is also a final check that verifies that what is inside the sealed box is the same thing as shown on the box exterior bar code during shipping. Now, it will no longer be necessary to open/inspect hundreds of boxes by hand prior to packing in export containers.

BOTTOM LINE: The Chiappa PASSIVE RFID can be read ONLY when passed within (2-3 inches) of an active (and powered) reader that is dialed in for the particular long antenna radio frequency of the RFID-this is not random. And it will NOT go into operation for a year or more.

SUMMARIZING: RFIDs have NO power source or GPS locator. Rest assured they are NOT transmitting your identification and location information to a Chiappa Firearm tasked CIA satellite.

RFID Removal: For those still concerned you can simply remove the grip cover and remove the hot glued RFID from the frame in the grip area when (over a year from now) these begin to appear.

Others may prefer to wrap the revolver and their head in aluminum foil, curl in a ball and watch reruns of Mel Gibson’s 1997 film, Conspiracy Theory. Well, that’s a plan too!

About:
MKS Supply, Inc.
8611-A North Dixie Drive
Dayton, OH, 45414
937-901-0363

For more info visit -  www.mkschiappa.com

Smith & Wesson Governor Revolver

Smith and Wesson

SPRINGFIELD, Mass.--(Ammoland.com)- Smith & Wesson Corp., announced that it is now shipping its new multi-caliber self-defense revolver, the Governor, along with the recently introduced Walther PPQ polymer pistol.

Both the Smith & Wesson Governor and Walther PPQ were specifically engineered to address needs in the personal protection market while at the same time, carrying forward the innovation and reliability of two of the industry’s most recognized firearm companies.

“Together, Smith & Wesson and Walther have over 280 years of combined experience in the firearm industry,” said James Debney, President of Firearms for Smith & Wesson.

“This rich history of product innovation and quality manufacturing is brought to the forefront in both the new Governor revolver and PPQ pistol. Each of these products exemplifies the finer qualities of both companies while serving as a valuable tool for a wide variety of self-defense applications.”

Smith & Wesson Governor
Appropriately named the Governor for its authoritative appearance and specialized features, this new-age revolver provides discerning consumers with an essential tool for self-defense needs. At the core of the revolver is Smith & Wesson’s patented heat-treated scandium frame for superior strength and reduced weight. Capable of chambering a mixture of .45 Colt, .45 ACP and .410 gauge 2 ½-inch shotshells, the Governor allows users the ability to customize the load of their firearm to meet individual preferences. The shooter’s choice of ammunition is housed in the revolver’s six-shot stainless PVD-coated cylinder, which adds an extra level of protection to this already rugged platform.

On top of the revolver’s compact 2 ¾-inch barrel, Smith & Wesson has added a dovetailed Tritium front night sight for enhanced accuracy in low-light conditions, while the Governor’s fixed rear sight is aptly suited for this self-defense handgun. Measuring 8 ½ inches in overall length with an unloaded weight of 29.6 ounces, the Governor is further suited for personal protection with its matte black finish, optional factory-installed Crimson Trace® Lasergrips® and renowned smooth double-action and crisp single-action trigger pull. Accurate, rugged and reliable, the Governor is shipped complete with 2-round and 6-round moon clips that provide the ultimate in ammunition flexibility.

Walther PPQ
Designed to be a popular choice for both law enforcement and personal protection uses, the PPQ pistol is backed by Walther’s 125 years of dedication and technical expertise. The new line of polymer-frame pistols is available in both 9mm and .40 S&W and each model has been enhanced with a smooth action and short trigger reset made possible by the Walther Quick Defense Trigger. With its short travel, light trigger pull and quick audible reset, the new trigger design not only helps improve accuracy but also allows for a well-placed follow-up shot should the need arise. Additional features designed to improve handling of the firearm include front and rear slide serrations, an extended, ambidextrous slide stop as well as an ambidextrous magazine release located on the trigger guard.

The Walther PPQ can accommodate users of different stature with its small, medium and large backstrap, while the pistol’s cross-directional textured Tactical Grip enables a positive feel in any environment. On top of the 4-inch barrel, the PPQ is standard with a three-dot sight configuration with an adjustable rear sight for accurate shot placement. Additional features include a picatinny-style equipment rail, loaded chamber indicator and black finish. The 9mm version of the PPQ is standard with a 15-round capacity while the .40 S&W pistol holds 12 rounds. When extra capacity is required, an optional 17-round 9mm and a 14-round .40 S&W magazine is available. Manufactured to be easily and quickly reassembled and disassembled without the need of tools, the Walther PPQ is shipped complete with two magazines and a thumb loader.

Walther PPQ Pistol

About Smith & Wesson
Smith & Wesson Holding Corporation (NASDAQ: SWHC) is a U.S.-based, global provider of products and services for safety, security, protection and sport. The company designs and constructs facility perimeter security solutions for military and commercial applications, and delivers a broad portfolio of firearms and related training to the military, law enforcement and sports markets. SWHC companies include Smith & Wesson Corp., the globally recognized manufacturer of quality firearms; Smith & Wesson Security Solutions, a full-service perimeter security integrator, barrier manufacturer and installer; and Thompson/Center Arms Company, Inc., a premier designer and manufacturer of premium hunting firearms. SWHC facilities are located in Massachusetts, Maine, and Tennessee. For more information on Smith & Wesson and its companies, call (800) 331-0852 or log on to www.smith-wesson.com; http://www.tcarms.com or www.waltherusa.com.

Ruger's Single-Ten Revolver

Ruger Firearms

Southport, CT --(Ammoland.com)- Sturm, Ruger & Company, Inc. (NYSE: RGR) is proud to announce the Ruger Single-Ten, a ten-shot single-action revolver chambered in .22 Long Rifle.

The Single-Ten features a ten-shot cylinder and is constructed from durable and handsome satin-finished stainless steel.

With a 5.5″ barrel and smooth, walnut “Gunfighter” grips, the Single-Ten is well balanced and points easily.

The sight picture of the Single-Ten is enhanced by Williams fiber optic sights, which are click-adjustable for both windage and elevation.

“The Single-Six has always been a fun gun to shoot,” remarked Mike Fifer, Ruger’s CEO.

“The additional cylinder capacity, along with the trim Gunfighter grips and fiber optic sights, make shooting the Single-Ten even more enjoyable,” he continued.

For more information on the Ruger Single-Ten, or to learn more about the extensive, award-winning line of Ruger firearms, visit Ruger.com or Facebook.com/Ruger . To find accessories for the Ruger Single-Ten or other Ruger firearms, visit ShopRuger.com.

Ruger Single-Ten Revolver

Midway USA

Columbia, MO --(Ammoland.com)- MidwayUSA, a catalog and Internet retailer with JUST ABOUT EVERYTHINGSM for Shooting, Reloading and Gunsmithing, is excited to announce the release of their latest DVD – Gunsmithing the Smith & Wesson Revolver.

Gunsmithing the Smith & Wesson Revolver provides a detailed, step-by-step account of twelve gunsmithing projects performed on K-, L- and N-frame revolvers.

With a run time of 36 minutes (plus bonus content), viewers can watch along as Larry Potterfield performs a range of gunsmithing tasks, ranging from a detailed inspection, action work, and repairing a slow-timed revolver.

Gunsmithing the Smith & Wesson Revolver DVD

This DVD provides the detailed information to completely disassemble and reassemble a Smith & Wesson revolver as well as provide invaluable tips on gunsmithing!

“Whether you want to learn how to bob the hammer and smooth the face of the trigger to make a more concealable carry weapon, or add a red-ramped front sight, this DVD will teach you how,” says Larry Potterfield, Founder and CEO, MidwayUSA.

“For this video, we worked with a range of K-, L- and N-frame revolvers to demonstrate each process and provide detailed explanations of the tools and the techniques used. If you’re interested in Smith & Wesson revolvers, I think you’re really going to like it.”

This video is now available on MidwayUSA’s website and is in MidwayUSA’s June Flyer and retails for $29.99.

For more information about MidwayUSA, please visit www.midwayusa.com or call 1-800-243-3220

Ruger Blackhawk Flattop 45 Colt or 45 ACP Convertible Revolver Exclusively at Lipsey's

Lipsey’s Firearms

Baton Rouge, Louisiana --(Ammoland.com)- Lipsey’s LLC, a leading nation-wide firearms distributor, is pleased to announce an exclusive run of Ruger Flattop revolvers chambered in the classic 45 Colt cartridge.

As a bonus, they will include an additional 45 ACP cylinder. These highly anticipated revolvers will feature a blue finish, simulated ivory “gunfighter” style grips and adjustable sights.

They will be built on the mid-size 357 Magnum frame and offered with a 5-1/2” barrel. A stainless steel version of the same revolver will follow shortly.

For detailed information on this model vist: http://tiny.cc/vq0lw

Lipsey’s has been a firearms distributor since 1953 and currently services FFL licensed firearms retailers in all 50 states.

This exciting new exclusive 45 Colt / 45 ACP Flattop convertible will complement Lipsey’s extensive line of special make-up and limited edition firearms. To find out more about these and other Lipsey’s offerings, please visit www.lipseys.com

Taurus M405B Revolver

Taurus Firearms

MIAMI, FL --(Ammoland.com)- The new Taurus 405 and 445 revolvers are aggressive wheel-guns that deliver superior accuracy and stopping power without the heft or bulk of most large caliber revolvers.

These 5-shot revolvers are available in blue or matte stainless finish with the Taurus Ribber Grip® that reduces felt recoil.

The 445 is chambered in .44 Special and features an Ultra-Lite frame that weighs only 22 ounces.

The revolver’s barrel measures 2 inches, with an overall length of 7 inches. The 405, Taurus’ first .40 S&W revolver, features a lightweight frame that weighs just 29 ounces and includes stellar clips.

The revolver’s barrel measures 2 inches, with an overall length of 7 inches.

Like all Taurus firearms the 405 and 445 come standard with the unique onboard Taurus Security System that allows users to securely lock the gun using an inconspicuous key-lock. MSRP $452 – $514.

Taurus M405B Revolver

Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Forjas Taurus, S.A. has become a diversified, international company celebrating its resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY, posting record growth every year since. Taurus brand firearms manufactured by Forjas Taurus are imported into the U.S. and serviced by Taurus International Manufacturing, Inc.

For additional information about Taurus, visit www.taurususa.com.

Apex J-Frame Revolver

Apex Tactical Specialties

LOS OSOS, Calif. --(Ammoland.com)- Apex Tactical Specialties, Inc. (ATS) will be exhibiting their products and services during the NRA Annual Meeting in Pittsburgh, Pa. this weekend, and will introduce their new Apex J-Frame Duty/Carry Kit, as well as showcase their Forward Set Sear & Trigger for the M&P pistol.

The Apex J-Frame Duty/Carry Kit is a drop in product that can be installed by anybody with the skills to disassemble their revolver and swap out parts. The kit produces a trigger pull in the range of 9 lbs and will be available at the show for a special show price of $20.00.

Apex Tactical staff will be on hand to demonstrate the J-Frame Duty/Carry Kit, the Forward Set Sear & Trigger for the M&P and the many other parts they’ve designed to improve the performance on your firearms. The Apex experts will also demonstrate the easy installation of their parts.

“Apex is offering special show pricing on all our products,” said Scott Folk, vice president of ATS. “Customers can handle firearms in our booth that feature our parts and we’re more than happy to demonstrate how the parts are installed.”

In addition to their parts kits for the M&P line and the J-Frame revolver, Apex Tactical will also showcase their championship winning custom revolver work. NRA Show attendees can find Apex on the show floor in booth #3908.

In addition to exhibiting at the NRA Show, Apex Tactical will be holding their first Personal M&P Armorer’s Course, hosted by the Allegheny County Port Authority Police, on Monday, May 2. The course will consist of full detail assembly and instruction on the inner workings of the Smith & Wesson M&P Pistol. The course will also include a few hours of range time.

Space in the Personal M&P Armorer’s Course is limited but slots are still available. For more information on the course, or to sign up, visit the Apex Tactical booth #3908.

For more information on Apex parts and services, visit www.ApexTactical.com, find Apex Tactical on Facebook at www.facebook.com/apextactical or follow @ApexTactical on Twitter.

Taurus Tracker 992 Revolver

Taurus Firearms

MIAMI, FL --(Ammoland.com)- No other revolver in its class comes close to matching the versatility of the new Taurus Tracker 992.

It easily transforms from .22 LR to .22 Magnum in seconds with its breakthrough button release 9-shot cylinder. The Tracker 992 is everything you could ever want for plinking, target practice or varmint hunting with these popular and affordable ammunition choices.

The Tracker 992 comes equipped with the exclusive Taurus Ribber Grip that reduces felt recoil and its strong, ordnance grade steel frame is built to last. Additional features include a single-action/double-action trigger, low profile adjustable sights and vent-rib that accommodates an optional scope mount base.

Available in blue or stainless steel finish with a 4 or 6.5 inch barrel, the Taurus Tracker 992 has an overall length of 8.9 to 11.4 inches and weighs 38 to 44 ounces. Like all Taurus handguns, the unique onboard Taurus Security System allows users to securely lock the gun using an inconspicuous key-lock. MSRP $545 – $592.

Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Forjas Taurus, S.A. has become a diversified, international company celebrating its resounding success as one of the world’s leading small arms manufacturers.

In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY, posting record growth every year since. Taurus brand firearms manufactured by Forjas Taurus are imported into the U.S. and serviced by Taurus International Manufacturing, Inc. For additional information about Taurus, visit www.taurususa.com.

Rhino Revolver 20D

MKS Supply

Dayton OH --(Ammoland.com)- MKS Supply, Inc. The Rhino is a totally new, ergonomically designed revolutionary designed firearm and the Rhino looks like no other handgun and for several good reasons.

Shown is the 2-inch barrel version in matt electorless nickel

Yes, we know. It’s out of the box advanced design is a little weird looking but it really is the first serious significant new revolver improvement in over 100 years!

Why?

The Rhino fires from the bottom chamber (6:00 position). This is unlike any other handgun. The low-barrel design shifts recoil in-line with the shooter’s forearm and upper arm (No, it won’t crush your body; shatter your arm; or lower your I.Q.; okay, it may do that).

The relocated barrel nearly eliminates shooter felt recoil and muzzle flip and allows the shooter to fire incredibly fast highly-accurate repeat shots from the hard recoiling and powerful .357 Magnum cartridge.

The unique Rhino trigger and firing control mechanism results in this revolver operating smoothly (no hammer movement) and in a manner very similar in operation to that of a semi-automatic handgun. Some refer (not accurate) to it as a semi-automatic revolver.

The Rhino’s unique hexagonal flat side shaped (round) cylinder makes for a thinner profile when carried legally concealed (and at these prices this new hand made high-tech revolver will not be in gang banger’s pockets).

The Rhino really is the new high-end high-performance Ferrari of handguns. The Rhino was designed and made in Italy in one of the worlds most modern hospital clean firearm factories.

• Caliber: .357 magnum (and .38 Special of course)
• Basic weight: Only 25-ounces with a 4-inch barrel.
• Frame material: Ergal (a special proprietary high-strength aircraft aluminum alloy)Metal finish: Matte/brushed electroless nickel or black
• Capacity: 6-rounds
• Barrel lengths and MSRP: 2-inch $799; 4-inch, $899; 5-inch, $925; 6-inch, $980.
• Special feature: Military style Picatinny rail under the barrel to allow for flashlights or laser sighting systems (rail is not available on the 2-inch model). The 2-inch model comes with a handmade Italian leather holster.
• Availability: As of early 2011 marketed across North America to licensed FFL dealers.

You may view this unusual high-performance revolver at www.mkschiappa.com

Taurus Protector Polymer Revolver - Black

Taurus Firearms

MIAMI, FL --(Ammoland.com)- A modern update on a classic design, the new Taurus Protector Polymer Series is built for those who want the best of old and new.

This revolver is offered with either a classically inspired checkered grip that has the look of wood but the purchase and durability of polymer or a Taurus Ribber Grip. Taurus’s new polymer hybrid frame makes the revolver lightweight and easy to carry.

This 5-shot revolver is available in .38 Special +P or .357 Magnum ammunition models with blue or matte stainless finish.

Additional features include a single action/double-action trigger, highly visible fiber optic front sight and ambidextrous thumb rest.

The .38 Special + P model’s barrel measures 2.5 inches, with an overall length of 6.32 inches and weight of just 18.2 ounces. The .357 Magnum model’s barrel measures 2.5 inches, with an overall length of 6.32 inches and weight of just 18.2 ounces.

Like all Taurus handguns the Protector Polymer comes standard with the unique onboard Taurus Security System® that allows users to securely lock the gun using an inconspicuous key-lock. MSRP $445 – $461.

Taurus Protector Polymer Revolver

Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Forjas Taurus, S.A. has become a diversified, international company celebrating its resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. Taurus brand firearms manufactured by Forjas Taurus are imported into the U.S. and serviced by Taurus International Manufacturing, Inc. For additional information about Taurus, visit www.taurususa.com.

Uberti Cattleman Pistol Set in 357 Magnum

Uberti Firearms

ACCOKEEK, MD --(Ammoland.com)- For 2011, Uberti is offering the Cattleman in matching, two-gun sets chambered for .357 Magnum.

Destined to be a must-have among the cowboy action shooters, Uberti’s matching Cattleman sets will also be treasured by collectors.

Matching single-action army revolvers, often sought-after and rarely found, are now available, new in the box, directly from the Uberti factory.

Historically, matching sets of single-action army revolvers were most often presented to high-ranking military and government officials, presidents and other heads of state.

The matched sets share the same serial number, but are distinguished from each other by an R or an L preceding the serial number.

Uberti is offering the matching Cattleman sets in four different versions, all of which are New Model (NM) steel Cattleman revolvers. Two versions come in standard blued finish with color case hardened frames and a one piece walnut grip—both with a 5 ½ inch barrel.

“Holding a pair of Uberti’s matched-set Cattleman revolvers is like holding a pair of Aces,” said Stephen McKelvain, Benelli’s VP of Marketing & Communications.

About:
Headquartered in Accokeek, MD, Benelli USA offers the largest selection of semi-automatic shotguns in the world, as well as a variety of fine products from Franchi, Stoeger, A. Uberti, and Stoeger Airguns. The company has built a solid reputation for producing high quality, durable products with their commitment to reliable function, efficient styling and mechanical precision. For more information visit the Benelli USA web site at www.benelliusa.com

Uberti 1873 Cattleman El Patron CMS Single-Action Revolver

Uberti Firearms

ACCOKEEK, MD --(Ammoland.com)- Uberti is now offering a new 1873 Cattleman El Patron Cowboy Mounted Shooter (CMS) in a customized, full-size single-action revolver that’s designed to make mounted shooting easier.

A shorter barrel is better suited for quick draw and combined with a new lower hammer profile makes it easier to cock and shoot the El Patron CMS using only one hand while mounted on horseback.

Like the original El Patron, the gunsmiths at Uberti have specially fitted each new El Patron CMS with high-grade, US-made Wolff springs and carefully examined and tested each revolver for function.

The result is a lighter, faster and smoother action.

All new models feature color case-hardened or stainless steel frames, steel backstraps, steel trigger guards, new checkered walnut grips and wide, easy-view front and rear sights.

The El Patron CMS models are available in the traditional .45 Colt and the powerhouse .357 Magnum and is available in six configurations.

1. .45 Colt; blued with 4” bbl, C/H frame
2. .357 Magnum; blued with 4” bbl, C/H frame
3. .45 Colt, blued with 3.5” bbl, C/H frame
4. .357 Magnum; blued with 3.5” bbl, C/H frame
5. .45 Colt; stainless steel with 3.5” bbl
6. .357 Magnum; stainless steel with 3.5” bbl

For the latest news and product information visit www.uberti.com

About:
Headquartered in Accokeek, MD, Benelli USA offers the largest selection of semi-automatic shotguns in the world, as well as a variety of fine products from Franchi, Stoeger, A. Uberti, and Stoeger Airguns. The company has built a solid reputation for producing high quality, durable products with their commitment to reliable function, efficient styling and mechanical precision. For more information visit the Benelli USA web site at www.benelliusa.com

Taurus Raging Judge

Taurus Introduces the Raging Judge in New Caliber

Taurus Firearms

Miami, FL -(Ammoland.com)-  Personal protection, home defense and sport shooting are easy work for the latest Taurus® Raging Judge that fires the larger, more powerful 28-gauge shotshell. The first Judge of its kind is ready to take on whatever comes your way. Whatever “it” happens to be.

The Taurus Raging Judge in 28 gauge comes equipped with the distinctive “Raging Bull” cushioned insert grip for reduced felt recoil and its strong, ordnance grade steel frame is built to take everything the revolver dishes out. Additional features include a single-action/double-action trigger and highly visible fiber optic front sight.

Available in blued or matte stainless finish with a 6.5 inch barrel, the Raging Judge in 28 gauge has overall length 13.75 inches and weighs 67 ounces. Like all Taurus handguns, the unique onboard Taurus Security System® allows users to securely lock the gun using an inconspicuous key-lock.

Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Taurus has become a diversified, international company celebrating resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. For additional information about Taurus and its complete line of products, visit www.taurususa.com.

Smith & Wesson 75th Anniversary .357 Magnum Revolver

Smith & Wesson

SPRINGFIELD, Mass.--(Ammoland.com)- Smith & Wesson Corp., the legendary 158-year old firearms maker, is offering collectors, hunters, and shooters a chance to own a piece of history with the introduction of a limited edition Model 27 revolver dedicated to the 75th Anniversary of the .357 Magnum.

Lavishly covered with American style scrollwork, the beautifully engraved Model 27 revolver features the hand drawn artwork of Smith & Wesson engraver David Mishichak.

This stylized design, machine engraved with precision and the finest attention to detail, is a fitting tribute to the historic anniversary of this legendary cartridge.

Collaboratively developed by some of the industry’s most notable names including Elmer Keith, Colonel D.B. Wesson and Phillip Sharpe, the .357 Magnum quickly became the quintessential self defense round. Offering improved penetration along with a flatter trajectory and limited recoil, the .357 Magnum soon became the most sought after cartridge by members of law enforcement. As the popularity of the cartridge continued to rise, so did the Smith & Wesson Model 27 or as it was more commonly referred to during the period – the Registered Magnum.

Soon, the revolver was found everywhere from the hips of police officers on the mean streets of Kansas City, to Texas where legendary lawman Skeeter Skelton called the Model 27 “the best all-around handgun.” The F.B.I. employed them as well; even General George S. Patton carried one into battles during World War II. Now, shooters everywhere have a chance to own their own through this limited edition anniversary model.

“Throughout the history of the company, Smith & Wesson has been a leader in many of the industry’s firsts,” said James Debney, President of Firearms Business for Smith & Wesson.

“Both the .357 Magnum and the Model 27 are living examples of this and they demonstrate our company’s innovative mind-set and willingness to stretch the boundaries. The anniversary Model 27 is truly artwork on a steel canvas and it would be a welcome addition to anyone’s personal collection.”

Constructed of carbon steel and built on a large N-Frame, this six-shot .357 Magnum/.38 S&W Special revolver is available with a 6 ½ – inch barrel and a bright blued finish. Across the revolver’s barrel, frame and cylinder, elaborate engraving gives the Model 27 a striking look and sense of purpose. The classic handgun comes with engraved square-butt walnut grips, pinned patridge front sight and a micro-adjustable rear sight.

Featuring a crisp single action and smooth double action trigger pull, the revolver stays true to the specifications of the original Model 27 while meeting modern shooters’ demands for accuracy and reliability. Only 500 anniversary models will be produced with a unique serial number range from SFY0001 to SFY0500. Each Model 27 will be shipped complete with a wooden glass top presentation case.

Shooting sports enthusiasts will have a chance to bid on serial number, SFY0001 of the 75th Anniversary Model 27, through a live auction on the Gunbroker.com website.

(http://www.gunbroker.com/Auction/ViewItem.aspx?Item=201358769)

Smith & Wesson will donate the proceeds of the auction to USA Shooting to support USA Shooting Team athletes and programs.

“Smith & Wesson has always been a strong supporter of the shooting sports and by partnering with them on this 75th Anniversary Model 27 .357 revolver, the proceeds of serial #0001 will benefit not only our athletes but also our various shooting programs,” said Buddy DuVall, USA Shooting Team Foundation Executive Director.

“Each year the men and women involved with USA Shooting spend countless hours refining their skills in hopes of qualifying for the next major match and ultimately the Olympics. Through our partnership with Smith & Wesson, not only will you have the chance to own a highly collectible firearm, but you will also be able to support those athletes who represent the United States in International and Olympic shooting competitions.”

For more information on the 75th Anniversary .357 Magnum revolver, please visit www.smith-wesson.com.

Smith & Wesson 75th Anniversary .357 Magnum Revolver

About Smith & Wesson
Smith & Wesson Holding Corporation (NASDAQ: SWHC) is a U.S.-based, global provider of products and services for safety, security, protection and sport. The company designs and constructs facility perimeter security solutions for military and commercial applications, and delivers a broad portfolio of firearms and related training to the military, law enforcement and sports markets. SWHC companies include Smith & Wesson Corp., the globally recognized manufacturer of quality firearms; Universal Safety Response, a full-service perimeter security integrator, barrier manufacturer and installer; and Thompson/Center Arms Company, Inc., a premier designer and manufacturer of premium hunting firearms. SWHC facilities are located in Massachusetts, Maine, New Hampshire, and Tennessee. For more information on Smith & Wesson and its companies, call (800) 331-0852 or log on to www.smith-wesson.com; www.usrgrab.com; or www.tcarms.com.

About USA Shooting:
USA Shooting, a 501c3 non-profit corporation, was chartered by the United States Olympic Committee as the National Governing Body for the sport of shooting in April 1995. USA Shooting’s mission is to prepare American athletes to win Olympic medals, promote the shooting sports throughout the U.S. and govern the conduct of international shooting in the country. Check us out on the web at www.usashooting.org.

Smith & Wesson Victory Model Revolver

FirearmsTruth.com

Michigan --(Ammoland.com)- The Smith & Wesson Model 10 has been called the most successful handgun of all time, and the most popular center-fire revolver of the 20th Century. (See: The History of Smith & Wesson Firearms by Dean K. Boorman).

The Model 10 is a .38-caliber six-shot pistol that first went into production in 1899, known as the .38 Hand Ejector model. The Model 10 is a rugged design yet easy to mass produce. Over 6 million have been manufactured to date.

At the start of WWII, the United States was woefully unprepared for a second world wide conflict. The official handgun of the military at the time was the Colt .45-caliber M1911 and its variants. While this handgun has more stopping power than the Model 10, the M1911 was more difficult to produce so the military purchased over 250,000 Model 10’s. The Smith & Wesson .38’s produced between 1940 and 1945 had serial numbers with a V prefix and were designated as the Victory Model.

Navy and Marine aviators carried the Victory Model as a side arm. The lighter and more compact design made a good fit with for the tight spaces pilots and crew members found inside airplanes of the day. The U.S. Coast Guard used the Victory Model well into the 1990’s. The Victory Model was also used by security officers who guarded factories and defense installations throughout the United States during the war.

To supplement the need for .38’s, the military turned to Colt, and the Colt Commando was born. Like the Victory Model, the Commando was a conventional double action revolver with a parkerized finish and chambered for the .38 Special cartridge. Most had a 4” barrel length, but a few were produced with a 2” barrel and came to be known as Junior Commandos. Colt sold over 45,000 Commando’s before war’s end.

Collectors will find that identifying a Victory Model is simple. The serial number on the butt has a V prefix. The Victory Model serial numbers were a continuation of the numbers used on the S&W .38 revolvers made for the British government prior to the U.S.’s entry into WWII. The U.S. Victory Model was introduced at serial number V-40,000.

After serial number 769,000, the V prefix was changed to VS to indicate these revolvers were fitted with an improved hammer block to help prevent accidental discharges if the gun was dropped. This change was made after the death of a sailor from an accidental discharge of a Victory pistol dropped on the deck of a ship. By the time the war stopped, serial numbers had reached VS-850,000.

The Victory Model was finished in Parkerizing and had plain walnut grips, and a lanyard loop on the butt. Victory Model revolvers generally had their top-straps stamped with an ordnance flaming bomb insignia and several types of markings may be observed. The most commonly encountered are “United States Property”, “Property of the U.S. Navy” markings and “U.S. Property GHD”. Some have been reported with “USMC”, “USCG” and “Property of U.S. Navy” stamped on the side-plates.

A few Victory Model revolvers with 2” barrels were produced. Most of the short barrel Victory Model revolvers don’t have the typical martial markings with the exception of the flaming bomb stamped on the butt.

The S&W Victory Model wasn’t a frontline sidearm. The low velocity .38 special cartridge couldn’t compete with the kinetic energy produced from a standard .45. But it did fulfill its duty well as a sidearm for those who didn’t fight in the infantry frontlines. Any WWII firearms collection would be proud to have a Victory Model alongside the better known weapons of that era.

Peter Suciu is executive editor of FirearmsTruth.com, a website that tracks and monitors media bias against guns and our Second Amendment rights. Visit: FirearmsTruth.com

Chiappa .22 LR M-Four Tactical Handgun

Chiappa Firearms

Dayton, OH --(AmmoLand.com)- Chiappa Firearms’ all new .22 L.R. handgun will hit the shelves early 2011.

This unique Chiappa .22 L.R. caliber handgun is identical to Chiappa’s .22 L.R. look alike of the U.S. Military M-4 Carbine.

Chaippa then eliminated the shoulder stock and shortened the barrel to 6-inches creating a new smallbore handgun.

A 28-shot magazine means a bunch of fun between reloads. Robust and reliable, this new handgun has all the same buttons and switches as the regular M-4 Carbine so any learning curve between the real combat carbine, the Chiappa smallbore military look alike carbine and the new Chiappa M-Four pistol is zero.

• MSRP: $469.00
• Weight: 4.1 pounds
• Overall length: 145/8 inches
• Barrel length: 6 inches
• Magazine capacity: 28 rounds
• Caliber: .22 Long Rifle
• Fun level: High

Marketed by:

MKS Supply, Inc.
8611-A North Dixie Dr
Dayton, OH 45414,
837-425-4867 or 937-545-0363
www.mkssupply.com

Rhino 20D 357 Revolver Matt Finish

Chiappa Firearms

Dayton, OH --(AmmoLand.com)- The new Revolutionary Rhino .357 Magnum revolvers debut in matte/brushed electroless nickel finish. This follows on the release of the stainless Rhino .357 Magnum.

The Rhino is an unusual looking ergonomically designed firearm. Thanks to this unique form follows function design, the recoil and muzzle flip is greatly reduced due to the bottom chamber 6:00 firing position.

This low barrel design shifts recoil in line with the forearm resulting in very fast and highly-accurate repeat shots.

The Rhino’s hexagonal shaped cylinder makes for a flatter profile when carried concealed. Each Rhino comes with a hand-made Italian calf skin molded and stitched leather holster to fit up to 2-inch wide belts and is marked with the Rhino logo to match the revolver.

Current Specifications:

• Caliber: .357 magnum (and of course .38 Special)
• Basic weight: 25-ounces with a 4-inch barrel
• Frame Material: Ergal (a high-strength aircraft aluminum alloy)
• Metal finish: Matte/brushed electroless nickel
• Stocks: Composite rubber or wood. One piece, retained by a single screw at the butt.
• Capacity: 6-rounds
• Barrel lengths and MSRP: 2-inch $799; 4-inch, $899; 5-inch, $925; 6-inch, $980.

Marketed by

MKS Supply, Inc. 8611-A North Dixie Dr. Dayton, OH 45414,

837-425-4867 or 937-545-0363

Charter Arms Off Duty Revolver

Charter Arms

Shelton, CT --(Ammoland.com)- Charter Arms, manufacturer of American made revolvers has added the Off Duty .38 Special and Undercover Lite .38 Special models to its line of personal defense revolvers.

Both models are available in a high polish stainless steel finish with a matte black frame. Distributors attending the National Association of Sporting Goods Wholesalers Annual Meeting and Expo in Louisville, KY later this week will have the opportunity to see them up close at Charter Arms booth No.133.

Charter Arms President, Nick Ecker said, “What’s unique to both the Off Duty and the Undercover Lite is the high polish finish which offers a traditional look, while the matte black frame creates a futuristic appearance and style. These two new finishes complement the other models in the product line that have grown in popularity. Our customers will appreciate both models are sleek in appearance and were designed for concealable activities.”

The five shot, two inch barrel of the Off Duty and Undercover Lite frame are made from 7075 Aircraft Quality Aluminum which assures superior strength. Both models weigh 14 ounces, with serrated front and rear notched sights and come with combat rubber grip panels that can be changed out to a Crimson Trace Grip.

The Off Duty has an internal (DAO) double action hammer, allowing the firearm to be shot repeatedly through the pocket without snagging, while the Undercover Lite model has an external standard hammer. Both of these new models are an ideal choice for any concealed carry situation.

Charter Arms Undercover Lite Revolver

About:
Founded in 1964, Charter Arms manufactures a full line of revolvers made by professional, skilled American craftsmen in the heart of New England’s firearm valley in Shelton, CT. Steeped rich in tradition with unmatched customer service, Charter Arms revolvers are consistently associated with personal protection because of their strength, reliability and accuracy. All Charter Arms revolvers are covered with a lifetime warranty. For more information, visit www.CharterArms.com or call customer service, Ph: (203) 922-1652.

Charter Arms Chic Lady Revolvers: Chic Lady and The Chic Lady Off Duty

Charter Arms

Dayton, Ohio --(Ammoland.com)- Charter Arms NEW “Chic Lady” revolvers. In the fashion world hot pink is the new black and Charter Arms has made it so in the firearms industry too. The New Charter Arms Chic Lady revolvers make a real statement.

Evolved from Charter Arms’ popular Pink Lady series these two revolvers are a feathery-light 13-ounces thanks to a tough anodized pink 7075 aircraft aluminum frame.

The Chic Lady revolvers feature a highly-polished stainless steel cylinder, barrel, hammer, and cylinder release. Additionally, the Chic Ladies are fitted with contemporary design recoil absorbing rubber grips. It all comes together with the flat finished trigger, trigger guard, back strap, polished stainless steel components and black grips, hot pink frame to create a truly stunning looking light-weight easy to carry self defense revolver with plenty of serious .38 special +P power. Can it get better?

Oh yeah! Leave it up to Charter Arms. Each Chic Lady comes in a bright pink faux alligator skin, combination locking aluminum foam lined carry case. Debuted at this time of year this makes the Chic Lady revolvers an incredible gift idea too.

Basic Specifications:

• Caliber: .38 Special +P
• Weight: 13-ounces
• Barrel length: 2-inches
• Frame: Anodized 7075 aircraft aluminum
• Grips: Contemporary design black rubber
• Capacity: Five-rounds

Two Models:

• Exposed hammer for single and double action–model number 53839
• Enclosed hammer double action only–model number 53852

Price: MSRP $485.00 including the carry case of course.

About:
Founded in 1964 Charter Arms manufactures a full line of revolvers made by professional, skilled American craftsmen located in the heart of New England’s firearm valley in Shelton, CT. Steeped rich in tradition with unmatched customer service, Charter Arms revolvers are consistently associated with personal protection because of their strength, reliability and accuracy. All Charter Arms revolvers are covered with a lifetime warranty. For more information on Charter Arms, please visit www.CharterArms.com or call customer service, (866)-769-4867.

Charter Arms Chic Lady Revolvers: Chic Lady and The Chic Lady Off Duty

Charter Arms

SHELTON, CT --(Ammoland.com)- Charter Arms will introduce two new revolver models at the National Association of Sporting Goods Wholesalers Annual Meeting and Expo in Louisville, KY November 3 – 5, 2010.

The Chic Lady and The Chic Lady Off Duty Revolvers will make their debut at MKS/Hi-Point Distributors, booth No. 711.

Nick Ecker, President of Charter Arms said, “Our loyal customers repeatedly stated their desire for Charter Arms to produce a revolver with a high polish finish, creating a sophisticated and elegant look, so we listened. Both models are finished in a high polish stainless steel, pink anodized frame, rubber grip, 2 inch barrel, 5-shot capacity and weigh in at 13 ounces, presented in a faux alligator pink attaché case with high polish stainless steel trim. It’s the ultimate piece every classy lady would want to have in her own private collection.”

The Chic Lady has a standard hammer while The Chic Lady Off Duty has an internal hammer (DAO) double action only.

Both lightweight gun models have a comfortable grip capable of fitting a small hand or can be easily changed out to a Crimson Trace Grip. To acquire an accurate sight picture, each model has a serrated front sight along with a smooth action and quick release cylinder.

Both firearms models have a hammer blocked safety system ensuring the revolver cannot fire unless the trigger is held in the full rear position when the hammer falls.

About:
Founded in 1964 Charter Arms manufactures a full line of revolvers made by professional, skilled American craftsmen located in the heart of New England’s firearm valley in Shelton, CT. Steeped rich in tradition with unmatched customer service, Charter Arms revolvers are consistently associated with personal protection because of their strength, reliability and accuracy. All Charter Arms revolvers are covered with a lifetime warranty. For more information on Charter Arms, please visit www.CharterArms.com or call customer service, (866)-769-4867.

Colt M1917 Revolver

FirearmsTruth.com

Michigan --(Ammoland.com)- The United States was the only major combatant of WWI and WWII that issued handguns to non-commissioned officers.

Most nations treated handguns as a symbol status to be handed out to officers, not as a frontline battle weapon. The U.S. considered side arms an important supplement to the trench fighting of the First World War. The average combatant of the Great War carried a bolt-action rifle and the use of a quick-firing pistol is easy to understand when it comes to defending or assaulting trenches.

The standard military pistol at the time of the U.S.’s entry into WWI was the M1911 .45 automatic. But because the country was woefully unprepared to fight, a supplementary pistol was required that could be more quickly manufactured. Colt redesigned its M1909 revolver and the M1917 was born. The M1917 fired the same round as the M1911 and filled the combat gaps that weren’t able to procure the more desirable M1911’s. Colt produced 150,000 M1917s, with Smith & Wesson adding an additional 153,000 M1917s to military stocks during the war.

After the war, the M1917 was retired and became part of the country’s reserve stock. When the United Stated entered WWII, it was once again woefully under armed. The M1917’s were taken out of the reserve stock and refurbished. Most were cleaned and the original blued metal was parkerized. Most retained their walnut grips but a few were given plastic grips. The arsenal performing the refurbishing work was stamped on the frame.

Most refurbished M1917’s were used by the Military Police and as training weapons, but nearly 21,000 made it to the various fronts. Many WWII collectors prefer the refurbished M1917’s to the same model used in WWI. Evidence of parkerization, buffing and arsenal initials indicates a refurbished pistol. After WWII, the M1917 was retired and many were sold to civilians.

Colt M1917 Revolver Schematic

John Kullman is managing editor of FirearmsTruth.com, a website that tracks and reports on media bias against guns and Second Amendment rights.

Chiappa Revolutionary Rhino 357 Revolver

Chiappa Firearms

Dayton, OH – Chiappa Firearms (chiappafirearms.com) new Rhino Revolver has finally cleared all the import requirements and tests for sale in the United States and are now arriving for distribution by MKS Supply, the exclusive marketer for the Rhino.

The first of these revolutionary revolvers will be the 2-inch barrel model. Within the next 60 days it is expected that the 3, 4, 5, and 6-inch versions will clear U.S. import and ATF tests as they are simply the same gun with longer barrels.

The Rhino, especially in the 2-inch version is an unusual looking firearm but form really does follow function. The recoil and muzzle flip from hot loads is greatly reduced thanks to the bottom chamber firing position. It just Works! And people who have shot it are amazed by the glass smooth action of this revolver.

Called the Rhino (sort of resembles one too) you will first notice that the barrel is actually at the bottom of the cylinder. The gun is designed to fire from the bottom chamber of the cylinder (6:00 position not 12:00 as with other revolvers). The new design resulted in improvements of the internal mechanisms over conventional revolver designs yielding up incredible reliability, a super-smooth action and improved safety.

The Rhino’s low barrel design ergonomically shifts recoil energy into the center of the palm of the hand and in line with the forearm thus greatly reducing the effects of felt recoil. Traditional revolver design (semi-autos too) place the barrel above the hand. When the gun is fired the leverage applied by that design forces the recoil into the web area of the hand between the thumb and trigger finger causing significant muzzle snap. Not the Rhino! Due to this new design a shooter can now fire very fast and accurate repeat shots.

The Rhino is designed to reduce its carry profile. This design is even carried into the hexagonal shaped cylinder making for a flatter profile when carried (especially handy for legal concealed carry).

The Rhino looks different, so what’s the deal? The looks are the direct result of the innovative improvements. Then again who would have thought a few years ago that fiberglass stocks (in color and with patterns) would one day be routinely accepted on traditional wood sporting rifles or that pink revolvers would be a rage?

Basic Specifications
(and more later as other variations or models develop):

• Caliber: .357 magnum (and of course .38 Special)
• Barrel Lengths: 2,3,4,5, and 6-inch
• Basic weight 25-ounces with a 4-inch barrel
• Frame Material: Ergal (a high-strength aircraft aluminum alloy)
• Metal finish: Blued or brushed alloy and stainless steel (stainless version first available in U.S.)
• Stocks: Composite rubber or wood. One piece, retained by a single screw at the butt.
• Capacity: 6-rounds
• Final fit and finish work done in U.S.A.
• Stainless Polished Version Price (MSRP) 2- and 3-inch, $775; 4-inch, $899; 5-inch, $925; 6-inch, $980.

Additional background: It all began in 2000. First, the full history of this Italian designed firearm is far too extensive for this press release, but a few facts may help you. The Rhino is NOT the semi-automatic revolver referred to as the Mateba (Accurately written as Ma.te.ba.). The Ma.te.ba. and the Rhino are both designed by Emilo Ghisoni which may explain why the guns look similar. Mr. Ghisoni and his friend and financial supporter Antonio Gudazzo completed the project. When Mr. Ghisoni passed away in April 2008 Mr. Cudazzo then took the gun design to Mr. Reno Chiappa, proprietor of the Chiappa Group (Italy) of which Chiappa Firearms is a subsidiary.

Mr. Chiappa then contacted Ron Norton of Chiappa Firearms, Ltd. (a subsidiary responsible for the developing of Chiappa products in North America) and the Rhino revolver finally begun production in 2009. The result is the Rhino, a different looking highly-functional, ultra-smooth action revolver with a purpose engineered recoil controlling ergonomic design. Chiappafirearms.com

Marketed by MKS Supply, Inc. 8611-A North Dixie Dr. Dayton, OH 45414, 837-425-4867 or 937-545-0363

About:
MKS Supply is proud to be a part of the American traditions of gun manufacturing—and gun ownership. We will partner responsibly with gun makers, retailers and enthusiasts to maintain those traditions for the future.

Smith & Wesson S&W500 Bone Collector Revolver

Smith & Wesson

SPRINGFIELD, Mass.--(Ammoland.com)- Smith & Wesson Corp., the legendary 158-year old firearms maker, has introduced a new X-Frame model in collaboration with Professional Hunter Michael Waddell – the S&W500  Bone Collector.

Engineered by the Smith & Wesson Performance Center, the Model S&W500 Bone Collector combines old-world craftsmanship with modern advancements into a new-age hunting revolver. This firearm is powerful, functional and capable of harvesting about any big-game animal on Earth. The Model S&W500 Bone Collector embodies the look, feel and attitude of Waddell’s latest television venture, “The Bone Collector,” airing on The Outdoor Channel.

Delivering more than a ton and a quarter of muzzle energy, the Model S&W500 earned the distinction as the most powerful production revolver when introduced. Built on the company’s X-Frame, the Model S&W500 provides today’s hunters with a well-balanced and manageable firearm when stalking large or dangerous game. Chambered for five rounds of .500 S&W Magnum, the new Bone Collector revolver is manufactured with a stainless steel frame, cylinder and 10.5-inch barrel design.

The S&W500 Bone Collector is standard with a two-tone finish, synthetic rubber grips along with the company’s renowned smooth double-action and crisp single-action trigger pull. To help aide in recoil management, the Model S&W500 is also standard with a full 360-degree muzzle compensator.

Equipped with a variety of special features that only the individual attention of master gunsmiths can achieve, the Model S&W500 Bone Collector is hand-cut and fit to insure top-notch accuracy and precision. Additional Performance Center features include a heavy-duty ball detent lock-up between the cylinder crane and frame along with a chrome-flashed hammer and trigger. The trigger on the Model S&W500 Bone Collector also features an over-travel stop and the revolver is standard with a Performance Center action job. All these features contribute to a revolver capable of answering the needs of any serious handgun hunter.

“We are excited to offer hunters a great option for taking their hunting adventure to the next level,” said Tom Kelly, Vice President of Marketing for Smith & Wesson.

“Handgun hunting is becoming more popular than ever with many states now offering a handgun hunting season or allowing handguns to be used during rifle season. Whether used for harvesting wild boar or whitetail deer, its popularity has exploded. The new Bone Collector is the latest in the extensive line of hunting handguns from Smith & Wesson. Providing today’s hunter with sufficient power and long range accuracy, handguns like this new S&W500 enable users to move easily through areas with thick vegetation that often prove difficult to navigate with a long gun.”

The Model S&W500 Bone Collector weighs in at 79.3 ounces and has been fitted with a red ramp front sight and an adjustable black blade rear sight to help aid in target alignment. When traditional sights are not being used, hunters will appreciate the integral weaver base located on top of the barrel, which allows for optics to be easily mounted. For convenient carrying once in the field, a swivel mount bolt sling has been added. Adding to its allure, the new Model S&W500 is engraved with the Bone Collector logo on the frame and will have a limited run of 1,000 units.

For more information on the Model S&W500 Bone Collector, including availability and pricing, please visit www.smith-wesson.com or call (800) 331-0852.

About Smith & Wesson
Smith & Wesson Holding Corporation (NASDAQ: SWHC) is a U.S.-based, global provider of products and services for safety, security, protection and sport. The company designs and constructs facility perimeter security solutions for military and commercial applications, and delivers a broad portfolio of firearms and related training to the military, law enforcement and sports markets. SWHC companies include Smith & Wesson Corp., the globally recognized manufacturer of quality firearms; Universal Safety Response, a full-service perimeter security integrator, barrier manufacturer and installer; and Thompson/Center Arms Company, Inc., a premier designer and manufacturer of premium hunting firearms. SWHC facilities are located in Massachusetts, Maine, New Hampshire, and Tennessee. For more information on Smith & Wesson and its companies, call (800) 331-0852 or log on to www.smith-wesson.com; www.usrgrab.com; or www.tcarms.com.

Special on Turnbull Dual Cylinder Open Range Revolvers

Turnbull Mfg

Bloomfield, NY - -(Ammoland.com)-

We are building a limited run of ten Turnbull Mfg. Co. Open Range Revolvers in .44 caliber.

Each revolver is hand assembled and polished to the exacting standards our customers have come to expect. The standard grips on these revolvers will be one piece walnut. Each set of grips is hand fit and shaped for a perfect fit.

Only a limited number left – contact us today to order Turnbull Mfg. Co. Open Range Revolvers

Hurry… Only $1,650.00 with dual cylinders!

[http://www.turnbullrestoration.com/store.asp?pid=31687&catid=19872]

These are standard revolvers except the following:

• 44 Caliber
• Dual cylinder 44-40 (44 WCF)
• 44 special

We will only make five with 4 ¾” barrels and five with 5 ½” barrels

For more information or to order, call 585-657-6338 or email tburkett@turnbullmfg.com.

About Turnbull Mfg. Co.
Turnbull Mfg. Co., Inc. creates faithful reproductions of vintage firearms working from original designs such as Colt and Winchester. They also work closely with several gun manufacturers to recreate limited edition “vintage” firearms. Founded as Doug Turnbull Restoration, the company is also world renowned for the faithful and accurate restoration of vintage firearms using the same processes and techniques used by the original gun makers. They also specialize in custom firearms work and gun upgrades. Turnbull Mfg. Co., Inc. is headquartered in Bloomfield, N.Y. USA. For more information, contact them at 585-657-6338 or visit www.turnbullmfg.com.

Charter Arms

Charter Arms, Dayton, OH --(Ammoland.com)- Fifteen more Charter Arms Revolver models have just been approved for sale by the state of California.

California and a few other states require extensive testing before allowing new models of firearms to be sold inside their state.

The California State conducted tests cover performance, construction and safety; and these tests take place over a period of months.

Also, the much awaited revolutionary Rhino Revolvers arrival into the U.S. has been delayed for the last couple of months due to U.S. government procedures, etc.

We now anticipate arrival in the next 30 days or so. www.chiappafirearms.com

About:
Charter Arms – Setting the American Standard for Reliable, Safe and Affordable Personal Protection. Visit: www.charterarms.com

TurnBull Firearms Colt SAA Custom Engraved 45 Revolver

Turnbull Mfg

Bloomfield N.Y. – Turnbull Mfg. Co. will be providing commemorative pistols to be fired off at the Firestone 500k IndyCar Series race at Texas Motor Speedway Victory Lane Celebration on Saturday, June 5, 2010. These pistols will then be donated to be auctioned off to raise money for the Speedway Children’s Charity in 2011.

Turnbull has created this pair of Turnbull 45 Colt style single action revolvers with 5 ½” barrels, and (pre-ban elephant) ivory grips. These pistols are custom engraved with a modified Colt factory ‘A’ pattern, with crossed checkered flags on the front of the frame, the State of Texas outline on the breech ball, and the Texas Star on loading gate.

“We are honored to be able to be the providers of the commemorative firearms to be fired off at the Firestone 500k IndyCar Series race,” said Keith VanOrman, President of Turnbull Manufacturing. “At Turnbull Manufacturing we take great pride in the work we do restoring antique firearms and welcome the opportunity to share this custom work with others.”

The pistols will be highly polished and appear as the original Colt pistols did in the late 1800s, utilizing specialized finishing processes that have been perfected by Turnbull. These pistols’ will feature a carbona blue finish while the frame, gate and hammer will be bone and charcoal color case hardened, along with a nitre blue finish on all the screws and pins.

The Turnbull manufactured guns will have custom serial numbers to signify them as unique for this IndyCar series event. Keith VanOrman, Turnbull Manufacturing Company president, will present the commemorative firearms in the winner’s circle along with company founder, Doug Turnbull.

About Turnbull Mfg. Co.
Turnbull Mfg. Co., Inc. creates faithful reproductions of vintage firearms working from original designs such as Colt and Winchester. They also work closely with several gun manufacturers to recreate limited edition “vintage” firearms. Founded as Doug Turnbull Restoration, the company is also world renowned for the faithful and accurate restoration of vintage firearms using the same processes and techniques used by the original gun makers. They also specialize in custom firearms work and gun upgrades.
Turnbull Mfg. Co., Inc. is headquartered in Bloomfield, N.Y. USA. For more information, contact them at 585-657-6338 or visit www.turnbullmfg.com.

Taurus Judge Public Defender Ultra-Lite Revolver

Taurus Firearms

MIAMI, FL –-(Ammoland.com)- For 2010 Taurus took the Judge Public Defender and made it even lighter with an incredible Ultra-Lite aluminum frame.

This new Public Defender weighs a mere 20.7 ounces, yet still delivers the same devastating firepower that makes its brothers famous. Nothing could be better for a nightstand gun or as a lightweight pack gun on trips through the backcountry.

Capable of chambering both .410 shotgun shells and .45 Colt ammunition, this amazing 5-shot combo gun is ideal for short distances – where most altercations occur – or longer distances with the .45 LC ammunition.

The rifling has been finely tuned on this small frame revolver to spread the shot pattern at close quarters or to guide the bullet to the target. The Public Defender also features a reduced profile hammer that will not catch or snag for a quick and reliable draw.

The Public Defender Ultra-Lite is available with carbon steel or stainless steel cylinder in either stainless or blued finish. All Taurus Judge models include fixed rear sights and fiber optic front sights as well as Taurus’ ergonomic Ribber Grips. Additionally, like all Taurus handguns, the unique Taurus Security System® allows users to securely lock the gun using an inconspicuous key-lock. MSRP $648.00 – $680.00.

About:
Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Taurus has become a diversified, international company celebrating resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. For additional information about Taurus and its complete line of products, visit www.taurususa.com.

International Confederation of Revolver Enthusiasts

LOS OSOS, Calif. --(AmmoLand.com)- For Troy Mattheyer there’s no school like the old school as the Ellis, Kan. resident won the Retro division title at the International Confederation of Revolver Enthusiasts’ (ICORE) Rocky Mountain Revolver Regional this past Sunday in Eaton, Colo.

The event is part of a six match revolver competition series sponsored by Smith & Wesson, the 158-year-old firearms maker whose wheelguns are favored by competition shooters.

Mattheyer claimed the Retro title with a final score of 290.38, winning six of the eight stages in the match. He led the match for all but one stage, the first.

The Retro division in ICORE is named for the “retro” revolvers that hold only six shots and use speed loaders as opposed to new higher capacity revolvers with seven or eight rounds where moon clips are permitted. Moon clips allow for faster reloading.

Coming in second 99.7 points behind Mattheyer was the Senior Retro winner and Rapid City, S.D. resident Douglas Schmidt who posted a final score of 390.08. Third place went to Nathan Eitrheim, also of Rapid City, S.D., who finished 12.04 points behind Schmidt with 402.12.

Colorado shooters Chuck Sampier of Fort Collins and Michael Knutson of Westminster followed closely behind finishing fourth and fifth, shooting 407.97 and 411.76 respectively. Both shooters managed to win a stage in the match with Knutson winning the first stage and Sampier the third.

The ICORE Rocky Mountain Regional Revolver Championship was held at the Weld County Fish & Wildlife High Plains Shooting Range Saturday and Sunday, May 1-2. The competition drew shooters from throughout Colorado, as well as California, Idaho, Kansas, South Dakota and Utah, and was the third in a series of six regional events. The next regional event is scheduled for the Sunday, July 18 when the Central States Revolver Regional will take place in Buchanan, Mich.

For further information on the ICORE competition season, as well as complete match results, visit www.icore.org.

About ICORE:
The International Confederation of Revolver Enthusiasts (ICORE) was founded in 1991 by Mike and Sharon Higashi, long time active shooters in all the handgun sports. Envisioned as an alternative to the “arms race” that was occurring in the other action shooting sports at that time, a revolver-only competition would allow even the most basic equipment to be used and still provide enjoyment and satisfaction.

Team Smith & Wesson Shooter John “Repeat” Bagakis

International Confederation of Revolver Enthusiasts

LOS OSOS, Calif. --(AmmoLand.com)- Might as well call him John “Repeat” Bagakis, as the Livermore, Calif. resident, and Team Smith & Wesson shooter, successfully defended his Limited division title on the Hogue Action Pistol Range at the International Confederation of Revolver Enthusiasts (ICORE) 13th Annual Southwest Regional Revolver Championship this past Saturday in San Luis Obispo, Calif.

Bagakis bested a field of 48 limited revolver shooters for the second year in a row by winning seven of eight stages and posting a final score of 168.83 that not only placed him at the head of the pack, but also third overall among all 94 shooters.

Second place in the match went to Richard Brethour of Tempe, Ariz. who finished more than 18 points behind Bagakis, and in eighth place overall, with a final score of 187.31. Brethour took top honors on the seventh stage, and in doing so picked up nine points on Bagakis who led the match from the start.

Going into the eighth and final stage of the match, Brethour was within striking distance, just 7.64 points behind Bagakis, but could not overtake him shooting 47.37 to Bagakis’ stage winning 36.45.

Finishing in third was Tom Hubbard of Paso Robles, Calif. with a final score of 216.89, more than 48 points out of first. Overall, Hubbard finished in 16th place and shared the stage seven win with Brethour.

Fourth place, and 19th overall, went to Chris Sallee of Santa Maria, Calif. with a score of 219.42 while fifth place, and 21st overall, went to Seiichi Ishikawa of Montebello, Calif.

Other notable finishes in the Limited division included Apex Tactical team member Lisa Farrell of Los Osos, Calif. taking High Limited Lady honors by finishing 11th in Limited and 36th overall with a score of 269.64.

High Limited Senior went to Ivan McKinley of Big Bear, Calif. with 280.90, good enough for 15th in Limited and 42nd overall, while High Limited Super Senior went to Tom Frankel of Daly City, Calif. who finished 19th in Limited and 52nd overall with 302.57.

Team Smith & Wesson Shooter Molly Smith

In the Juniors category, Zachary Shepard of Lompoc, Calif. finished 21st in Limited and 56th overall for High Limited Junior with 310.54. Molly Smith, a Team Smith & Wesson member of Cambria, Calif., finished second among the juniors but took the High Limited Lady Junior award with 331.27 which put her 24th among the Limited shooters and 62nd overall.

The ICORE 13th Annual Southwest Regional Revolver Championship drew competitors from throughout the Golden State, as well as Arizona and Nevada, and was the second in a series of six regional events sponsored by Smith & Wesson. The next regional events are scheduled for the first weekend in May when both the New England and Rocky Mountain Revolver Regional will take place.

For further information on the ICORE competition season, as well as complete match results, visit www.icore.org.

About ICORE:
The International Confederation of Revolver Enthusiasts (ICORE) was founded in 1991 by Mike and Sharon Higashi, long time active shooters in all the handgun sports. Envisioned as an alternative to the “arms race” that was occurring in the other action shooting sports at that time, a revolver-only competition would allow even the most basic equipment to be used and still provide enjoyment and satisfaction.

International Confederation of Revolver Enthusiasts

LOS OSOS, Calif. --(AmmoLand.com)- Richard Wolfe of Escalon, Calif. made up for his second place finish in last month’s International Confederation of Revolver Enthusiasts (ICORE) Southern Regional by capturing the Open division title at ICORE’s 13th Annual Southwest Regional Revolver Championship.

The match was held Saturday, April 10 at the Hogue Action Pistol Range in the California coastal community of San Luis Obispo. Over 90 top revolver shooters from throughout the Golden State as well as Arizona and Nevada competed in the match which was sponsored by famed firearms maker Smith & Wesson.

Wolfe took top honors this time around by outpacing his nearest competitor, Neil Hogue of Paso Robles, Calif., by more than 16 points and winning four of the eight stages to post a final score of 151.90. Last year, Wolfe, who is a Master class shooter, the highest skill level within ICORE, finished fifth in the Open division and sixth overall in this match.

Hogue, who is also a Master class shooter, took second with a score of 168.47, winning two stages in the process. Just over three points behind Hogue was Eric Leach of Los Osos, Calif. who won the second stage of the match. Leach also finished third in the ICORE Southern Regional.

Rounding out the top five was Master class shooter Todd Crow of Antioch, Calif. posting a final score of 176.11 to finish fourth in the Open division and fifth overall. Mesa, Arizona’s Vic Pickett of Team ADCO, the defending Open division champion, took fifth this year and finished sixth overall with a final score of 184.19. Picket, who is also a Master class shooter, won the remaining stage in the Open contest, claiming top honors on the fifth stage in the match.

Other Open division highlights include Richard Koester of La Grange, Calif. who posted a score of 188.48 to win High Open Senior and finished in seventh place and ninth overall. Koester also competed in the ICORE Southern Regional and placed eighth among Open shooters in that event.

The Super Senior Open title went to Tom Sparacino of Santa Clara, Calif. who ended the match in 38th place overall but 27th among Open shooters with his final score of 275.92.

Only 8.38 points separated Flora Yang of Cerritos, Calif. and Janae Sarabia of Lompoc, Calif. in the battle for High Open Lady. Yang took the title with a final score of 252.13 which placed her 22nd in the Open division and 31st overall.

While Sarabia finished second among the women, as a junior shooter she still walked away with a title by winning High Junior Open Lady with a score of 260.51 and finishing 23rd in Open and 32nd overall.

The ICORE 13th Annual Southwest Regional Revolver Championship was the second in a series of six regional events sponsored by Smith & Wesson. The next regional events are scheduled for the first weekend in May when both the New England Regional and the Rocky Mountain Regional will take place.

For further information on the ICORE competition season, as well as complete match results, visit www.icore.org.

About ICORE:
The International Confederation of Revolver Enthusiasts (ICORE) was founded in 1991 by Mike and Sharon Higashi, long time active shooters in all the handgun sports. Envisioned as an alternative to the “arms race” that was occurring in the other action shooting sports at that time, a revolver-only competition would allow even the most basic equipment to be used and still provide enjoyment and satisfaction.

International Confederation of Revolver Enthusiasts

LOS OSOS, Calif. --(AmmoLand.com)- On Saturday, Jude Javier of Santa Clara, Calif. claimed the Retro division title in San Luis Obispo, Calif. at the International Confederation of Revolver Enthusiasts (ICORE) 13th Annual Southwest Regional Revolver Championship.

Sponsored by legendary firearms maker Smith & Wesson, the Southwest Regional drew over 90 top revolver competitors from throughout the Golden State as well as Arizona and Nevada, to compete for titles in ICORE’s Open, Limited and Retro divisions.

Despite winning only one of the eight stages, Javier managed to come from behind on the fifth stage and held the lead through the remaining three to finish in first place among the retro shooters with a final score of 293.42.

Just 4.51 points behind in second place was Rex Jones of Garden Grove, Calif. who won two stages and finished the match shooting a total of 297.93. Third place went to John Maxwell of Newbury Park, Calif. who also won two stages in the Retro division race and finished with a score of 319.65.

Rounding out the top five were Cedric Yoshimura of Los Angeles, Calif. who took top honors on two stages and finished with 322.98, and Nelson Dymond of San Luis Obispo, Calif. with 333.87, finishing in fourth and fifth respectively.

The only other stage win, which occurred on the first stage of the match, went to Kevin Arquette of Phoenix, Ariz. who ultimately fell to seventh place in the Retro division.

The ICORE 13th Annual Southwest Regional Revolver Championship was the second in a series of six regional events sponsored by Smith & Wesson. The next regional events are scheduled for the first weekend in May when both the New England and Rocky Mountain Revolver Regional will take place.

For further information on the ICORE competition season, as well as complete match results, visit www.icore.org.

About ICORE:
The International Confederation of Revolver Enthusiasts (ICORE) was founded in 1991 by Mike and Sharon Higashi, long time active shooters in all the handgun sports. Envisioned as an alternative to the “arms race” that was occurring in the other action shooting sports at that time, a revolver-only competition would allow even the most basic equipment to be used and still provide enjoyment and satisfaction.

Hotshot Johnny Tuscadero's

Legacy Sports International

Reno, NV --(AmmoLand.com)- Legacy Sports International, LLC once again congratulates Hotshot Johnny Tuscadero for his second trick gun handling win using PUMA Westerner single action sixguns!

In December of 2009 Hotshot Johnny dueled to a tie with Pistol Packin’ Paula to claim a co-win for the Gun Handling Championship at the 1st Annual SASS/WWPAS World Championships in Las Vegas, Nevada.

Now, Johnny does it again! In a showdown of trick and fancy gun play between World Champion Gunslingers Pistol Packin’ Paula and Hotshot Johnny held during Wild West Days at Old Tucson Studios on the last weekend of March, Johnny walked away with first prize.

As Hotshot Johnny put it “Once again my Puma Westerners from Legacy Sports International did not let me down as I wow’d the crowd with gun spinning, fast draw and trick shooting against an able and talented performer who apparently just chose the wrong guns.” That’s 2 competitions and 2 wins!

Hotshot Johnny has this to say about his PUMA® Westerners:

“I perform literally thousands of shows a year, all over the world. Trick exhibition shooting, fancy twirling and lots of fast draw demonstrations. Live shows and rough handling, all hard on a weapon. My guns work more than most and under adverse conditions much of the time.

I have used almost every other SAA clone on the market in the past 20 years. I need a pistol that is authentic, decorative and above all, tough. I finally found it in the Puma Westerner. It has put up with everything I’ve thrown at it and the factory action job is as good or better than the $200 jobs I’ve had done on past pistols I’ve used. Smooth as butter and reliable. Locks every time, even when I power thru a fast draw demo.

You folks at Legacy Sports have offered an authentic SAA that is made better than the original. I won’t use anything else because when the crowds cheering, I need reliability. Thanks.” – Hotshot Johnny Tuscadero

Legacy Sports International, LLC is an importer of firearms and shooting accessories. Bringing in high quality, reliable and affordable products for shooting and hunting enthusiasts is the mission of Legacy Sports’ business. With well-respected brands including Howa and Puma rifles, NikkoStirling optics, Citadel semi-auto pistols and LE shotguns, and Escort and Verona shotguns, Legacy Sports is committed to offer today’s shooting sports enthusiast performance on the range and in the field. Legacy’s track record proves – without a doubt – that they have consistently provided accurate rifles and shotguns as well as award-winning optics for sportsmen on a budget. This is why Legacy Sports is known as “The Most Trusted Name in the Shooting Industry”.

For more information contact: www.legacysports.com

Taurus Introduces the Raging Judge Ultra-Lite Revolver

Taurus Firearms

MIAMI, FL –-(AmmoLand.com)- All rise for the biggest, meanest Judge on the market. The new Taurus Raging Judge Ultra-Lite® now comes with the option to load seven rounds of .410 3-inch or 2.5-inch shotshells and .45 Colt ammunition – all in the same revolver.

Just like the original Judge, this revolver delivers amazing versatility and devastating firepower for self-protection. The Raging Judge Ultra-Lite features the “Raging Bull” backstrap to reduce felt recoil, exclusive Taurus Ultra-Lite frame that cuts down on heft and a highly visible fiber optic front sight.

The Raging Judge Ultra-Lite is available in high quality matte stainless steel or blued finish with two different barrel options.

The three-inch barrel option has an overall length of 10.2 inches and weighs 41.4 ounces.

The six-inch barrel option has an overall length of 13.6 inches and weighs 47.2 ounces.

Like all Taurus handguns, the unique Taurus Security System® allows users to securely lock the gun using an inconspicuous key-lock.

About:
Beginning as a small tool manufacturer in Porto Alegre, Brazil more than sixty years ago, Taurus has become a diversified, international company celebrating resounding success as one of the world’s leading small arms manufacturers. In 1941 the company produced its first revolver, and in 1984 changed the industry forever by offering customers an unqualified LIFETIME REPAIR POLICY™, posting record growth every year since. For additional information about Taurus and its complete line of products, visit www.taurususa.com.