Things to Consider When Building A Reliable AR 15 Rifle

Things to Consider When Building A Reliable AR 15 Rifle
By RAR Guns

RAR Independence XRT Rifle
RAR Independence XRT Rifle
RAR Guns
RAR Guns

Castle Rock, CO –-(Ammoland.com)- I often see articles and post explaining how to assemble an AR15 rifle. While I find many of these articles to be very informative, most don’t touch on the details that are required to build a reliable, accurate rifle.

First let’s examine what a reliable AR15 must be able to do. A reliable Ar15 must first and foremost fire every time you pull the trigger. Whether in a life or death situation, competition shooting or just plinking, your weapon needs to work properly. It must also hit what you are aiming at.

Some of the main reasons an Ar15 will miss fire, is that poor quality parts were used. Saving a few dollars on a bolt assembly can mean the difference between a reliable rifle and one that consistently has problems.

When building a rifle from scratch, you should have a sort of blue print. You should know what parts you are going to use from the outset as opposed to just buying parts as you find them on sale. This is not to say you have to buy all your parts at once. But instead, know what you going to buy and why you’re using that particular part.

I have seen several instances where someone bought a AR rifle parts because it was cheap. This later caused problems in the rifle. One guy bought a light weight buffer and buffer spring because it was very cheap. Upon completing the rifle, he went to the range only to find that he couldn’t get two rounds in a row through it because it was short cycling. The buffer and spring did not match the rest of the parts he was using.

You should know how and what you will be using your rifle for. This will affect what parts you use to build the rifle. For instance, if you plan to shoot steel cased ammo in your rifle, you will have much more success with a 5.56 NATO chambered rifle than a .223 chambered rifle.

You will also need a heavy duty SOPMOD style ejection spring kit. This will insure that you get a successful shell extraction each and every time you fire the weapon.

Consider AR Rifle Accuracy when Building A Reliable AR 15 Rifle

Ar15 Lower Parts
Enhanced Ar15 Parts

Another thing to consider is how important accuracy is. AR15s vary in accuracy by quite a bit. They can range anywhere from ¼ MOA to 3 MOA. A lot of the accuracy obviously has a lot to do with the barrel you choose. A barrel does not have to cost $500.00 to be a good, accurate barrel. You can achieve a sub 1 MOA with a mid range cost barrel. And contrary to popular belief, a longer barrel is not a whole lot more accurate than a shorter barrel in most cases.

What you may gain in accuracy will be lost in mobility and weight.

When thinking about how accurate you weapon needs to be, consider the mission of the weapon. If it is a combat or tactical competition rifle, you probably what something you can group a lot of rounds quickly in a small area as opposed to one shot at a time in a ¼ inch hole. There are several things that can help in this area. A gas piston system will help with faster target reacquisition as will a good muzzle break/compensator. There are several products available to modify the receiver extension/buffer tube as well that will reduce felt recoil.

A high quality AR15 trigger and enhanced lower parts kit can also aid in acquiring your target quickly. I don’t recommend a two stage trigger for a combat or tactical competition rifle. Instead, I like a short pull single stage trigger with about 4 lbs. or less of resistance.

Reliable feed is another area that needs to be addressed. There are a lot of low cost lower receivers on the market that are very good. There are a few that are only good for paper weights. A good AR15 lower should either be forged or billet. Never use a cast lower receiver. They are unreliable and weak.

A quality BCG or Bolt Carrier Group is very important to reliable feeding. This is what is going to push the round into the chamber and lock it into place. A poorly manufactured BCG will be unreliable and possibly dangerous to the operator and other friendlies in the area.

The upper receiver may or may not have M4 style feed ramps. In today’s market, I see no reason not to have M4 feed ramps at least in the chamber. One problem we see a lot is the fit between the M4 cuts on the upper receiver and the M4 cuts on the chamber matching up. An improper fit will cause miss feeds and jams. This can be corrected a couple different ways. If you’re mechanically inclined, you may be able to fix the problem yourself. If not, take your rifle to a qualified gun smith or armorer to fix the problem.

These are just a few things that should be considered when starting to build your own AR15 rifle.

RAR Guns will at no charge or obligation, give free AR building advice and help to anybody who wants it. No strings attached.

RAR Independence XRT Rifle
RAR Independence XRT Rifle

About:
RAR Guns. Home of the best AR 15s in the world. We don't just assemble parts. We measure and test each part before it is installed. Then each part is function tested to insure proper operation. We have several AR15 models to choose from and we also build to your custom specifications. We warranty our AR15 rifles for workmanship for a full year no questions asked. Our AR15 rifles will even perform with most Russian, steel cased and polymer coated ammo. If it breaks or has a malfunction within one year of purchase, we will correct the problem for free. Visit: www.rarguns.com

  • 3
    Leave a Reply

    Please Login to comment
    3 Comment threads
    0 Thread replies
    0 Followers
     
    Most reacted comment
    Hottest comment thread
    3 Comment authors
    Tom WrightMatt lShotgunKirk Recent comment authors
      Subscribe  
    Notify of
    Tom Wright
    Guest
    Tom Wright

    So do you have a list of spring/bolts parts for upgrading an existing rifle that has a good lower, good upper, and a good barrel, along with a solid stock already? I see the prices varying widely for springs in particular. It would be nice to know which ones are the best. I imagine most are mid-grade made by a few manufacturers, but there must be ‘the most reliable’ springs out there. And bolt. Thanks.

    Matt l
    Guest
    Matt l

    I got a Anderson lower with a spa upper, every shot rolls through without any jams or problems. I’m trying to make her as accurate as possible without spending a lot.

    ShotgunKirk
    Guest
    ShotgunKirk

    Thank you RAR guns. m4 feed ramps fit/match is something you dont hear to much about.