Training Shooters on Steel
Written by Ben Kurata
Provo, Utah –-(Ammoland.com)- Why train on steel?
The shooter learns faster. Traditional cardboard or paper targets only give the shooter and the coach one feedback, visual.
If the bullet holes on the target are not visible (example: 5.56 mm at 100 yards), then the shooter and the coach have to play instant recall to try and determine what the shooter did well and what needs improvement. There is often a delay of several seconds if not minutes before the shooter receives feedback on how (s)he did, and it is difficult if not impossible for the shooter to remember what the sight picture, grip, and trigger press looked and felt like for each and every shot.
Why does the shooter learn faster on steel?
Let’s assume that we are conducting handgun training at traditional handgun fight distances, 15 yards and closer. When training on steel, when the shooter hits, they receive immediate feedback not only visually (the strike of the bullet on the steel) but also auditory feedback (the distinct “ping”).
If the target is a reactive steel target, the shooter also gets the additional feedback of having the target fall or move.
I would also argue that at Close Quarter Combat distances feedback is so immediate that the shooter remembers what the sight picture, grip, and trigger press looked and felt like for each successful shot.
While coaching by the instructor on cardboard or paper tends to be diagnostic, I find that coaching by the instructor on steel tends to be faster and more immediate. (“On the second shot you pulled low and left,” etc. vs. “Low. Low. Hold higher.”) Rather than concentrating on the not so good shots, the shooter and the coach can concentrate on the HITS.
More than one experienced instructor / shooter has put forth the idea that feedback provided by shooting on steel is so immediate that it actually enters the subconscious mind faster than the conscious mind can process all of the stimuli associated with conscious sight picture, grip, trigger press, etc.1 I can speak from my own experience that based thousands of dry fire repetitions with tens of thousands of live fire rapid fire strings, when firing a semi-automatic pistol in rapid fire I am not conscious of sight picture or trigger press as traditionally defined. I am very conscious of the rear outline of the slide (as it is in constant motion), the feel of the pistol in my hands and the trigger reset. With traditional cardboard or paper targets I do not get any feedback until I shoot the pistol to slide lock or the pre-determined number of shots and lower the muzzle. When shooting on steel, I get immediate feedback on each and every shot I fire and if I don’t hear an immediate “ping” after firing a shot, I know that I didn’t hit, and I need to do something differently for the next shot.
In other words, as the student progresses in his/her skill level, (s)he starts correcting him/herself before the coach can diagnose and offer suggestions. At this level, the shooter becomes his/her own coach. I have found that with a little practice, any individual who is motivated enough can easily fire 4-6 rounds a second from a semiautomatic pistol and have all the rounds strike in an acceptable area of the target at 7 yards. When firing this rapidly, you can’t be consciously thinking of “front sight focus, surprise trigger break” for each and every shot or the rate of fire will drop to 1-2 shots per second.
Well, assuming that both the Officer and the armed assailant in a shooting encounter are equally motivated, would you rather be sending or receiving 4-6 hits per second?
When firing at this rate on steel targets, the auditory response takes third place in perception after the visual (the blur of the rear of the slide crossing into an acceptable target area) and the tactile (the reset and pressing of the trigger). The reason is, if you wait for the “ping” on the steel, you will have delayed your response time by about a half a second or 2 outgoing / incoming rounds. I learned a long time ago while shooting on the Action Target Dueling Tree or Plate Rack that if I waited for the “ping” of my first target, my opponent was usually hitting his second, or even third target. I learned to see an acceptable sight picture for the first shot, press the trigger and immediately shift my eye focus to the second plate while muzzle of the handgun, rifle, or shotgun was still lifting.
Another, more practical reason for trusting your first shot is that in a real-life encounter, you probably won’t hear a “ping” from your adversary. You may not see any immediate reaction at all. There can be many reasons for this. First, and most likely (about 80 – 85% of the time nationally), is the possibility that you missed the threat entirely. That is why we train, train, and train some more. The second reason is that you hit, but did not hit a part of your attacker’s anatomy that would trigger an immediate reaction. (If you have the opportunity to attend one of Dr. James William’s excellent seminars, “Shooting with X-ray Vision”, do so.) The third reason may be that you hit, but the caliber / projectile configuration just didn’t perform as advertised. All of the above are good reasons for training to shoot and hit fast and repeatedly, and the quickest way to do so is to shoot on reactive steel.
In a subsequent article, I will go over how to shoot on reactive steel safely.
About Action Targets:
Action Target is a privately owned business headquartered about 40 miles south of Salt Lake City in Provo, Utah. For the last 20 plus years, Action Target has been the dominant force in shooting range equipment design and manufacturing for law enforcement, military, and commercial ranges around the world. We are proud of our commitment to deliver advanced firearms training products that help prepare our men and women in uniform for the heroic job of defending our safety and our freedom. Visit: www.actiontarget.com