Springfield Armory XD-S Mod.2 Handgun Announced

 

Springfield Armory Announces the XD-S Mod.2 Handgun
Springfield Armory XD-S Mod.2 Handgun

GENESEO, IL,– (Ammoland.com) –  The next evolution of the acclaimed XD-S pistol is here. The latest edition of Springfield’s most popular pistol is engineered in a slim, single-stack frame, holding 6 rounds of .45 ACP in a premiere concealed-carry firearm.

Springfield Armory XD-S Mod.2 Handgun

Springfield Armory’s XD-S Mod.2 offers upgrades from the inside out. A higher hand position, enhanced grip texturing, thinner slide, an SA front sight with Ameriglo’s Pro-Glo system and SA tactical-rack rear sight, and an enhanced trigger advance this polymer-framed pistol’s acclaimed Point and Shoot Ergonomics. Other features include a loaded chamber indicator and a grip safety that immediately readies the gun for action, while the drop safety in the striker block renders it virtually incapable of firing if dropped.

The XD-S Mod.2 frame moves the shooter’s grip higher on the firearm, closer to the bore axis, to enhance control, and softens recoil for improved accuracy. This Mod.2 improvement, coupled with the thinner beavertail, makes this lightweight pistol even more comfortable to shoot than its predecessor.

The width of the grip is a mere .975”, and the enhanced grip texturing gives the operator a solid feel and secure hold of the pistol – especially important in defensive encounters. Longer Posi- Wedge serrations make the slide easier to grab and rack.

Springfield Armory Announces the XD-S Mod.2 Handgun
Springfield Armory Announces the XD-S Mod.2 Handgun

 

The new XD-S Mod.2 features an SA front sight with Ameriglo’s Pro-Glo green tritium inside a yellow luminescent circle, paired with an SA tactical-rack serrated steel rear sight with U- notch, making target acquisition extremely fast in low-light. The enhanced short-reset and consistent trigger is the perfect choice for a defensive carry pistol.

Chambered in .45ACP, this latest edition of Springfield’s most popular pistol is engineered for a slim, single-stack frame just 6.5 inches long and under 5 inches high – ideal for the invisible fit and easy draw required of a concealed-carry pistol. The 3.3-inch barrel is Melonite treated hammer-forged steel, with a 1:16 twist for outstanding accuracy in a sub-compact size. Dual springs and a full-length guide rod manage .45 recoil and help keep rounds on target without punishing the shooter’s hands.

The XD-S Mod.2 comes with two stainless steel magazines: a flush-fitting 5-round mag, and one 6-round mag with Mid-Mag X-Tension. These magazines, unloaded and seated in the pistol, give the XD-S Mod.2 a weight of 21.5 ounces and 22.5 ounces, respectively. The single-stack

magazines provide ample capacity in a remarkably slim design, giving the XD-S Mod.2 the ideal profile for concealed carry purposes.

For those looking for a constant-carry pistol, the new XD-S Mod.2 is the perfect choice. It embodies everything Springfield Armory stands for: constant improvement, high-quality, and a relentless commitment to one goal – forging firearms that enable responsible citizens to preserve their right to keep and bear arms in the defense of life, liberty and the pursuit of happiness.

Springfield Armory XD-S Mod.2 Handgun is now available in three configurations:

For more information about the new Springfield Armory XD-S Mod.2 pistol, please visit www.springfield-armory.com.

XD-S Mod.2 Video Link: https://youtu.be/oEq4KmGZ4a0

In 1794, the original Springfield Armory was designated as our national armory by General George Washington, and began manufacturing muskets for the defense of our young, free Republic. This monumental institution went on to serve as a think tank for developing innovative firearms concepts and producing some of the most storied rifle platforms in our country’s history. The Armory functioned as a firearms supplier for every major American conflict until 1968 when the government sadly closed its doors. In 1974, two centuries after its inception, Springfield Armory Inc. in Geneseo, IL revived the iconic heritage of the Armory to carry on its legacy and restore the Springfield Armory name.

Springfield ArmorySpringfield Armory Inc. engineers, manufactures and assembles their legendary M1ATM, 1911 and SAINT AR-15 lines of firearms in Geneseo, Illinois. Since 2001, Springfield Armory has enjoyed a strategic, collaborative partnership with the state-of-the-art factory in Croatia working hand-in-hand to develop and engineer the multiple award-winning line of XD polymer pistols that have become staples in the US marketplace. We strive to honor this responsibility as guardians of the original Springfield Armory legacy by manufacturing the highest quality firearms to enable responsible citizens to preserve their right to keep and bear arms in the defense of life, liberty and the pursuit of happiness.

With an unmatched emphasis on craftsmanship, performance and exceptional customer service, our mission is to forge superior firearms and provide the tools necessary to defend individual freedoms and equality for those who embrace the rights and principles secured by our Founding Fathers. For more information, please visit us at: springfield-armory.com.

1 Comment
Most Voted
Newest Oldest
Inline Feedbacks
View all comments
John DeMoss

I was wanting to convert my SA XD Mod. 2 subcompact from a 40cal to a 9mm, but I wasn’t sure if the magazine for the 9mm would fit in place of the of the 40cal magazine to complete the conversion. Can you tell me if this will work?