Krytos Ind. Launch Revolutionary Titanium Finish & Titanium Glock Slides ~ VIDEO

USA – -(Ammoland.com)- Krytos Industries launched a revolutionary titanium finishing process along with titanium slides for Glock handguns at the 2018 NRA Convention in Dallas, Texas on May 4th. The new, patented finishing process, ArmorTi™, allows titanium to be used for numerous applications (like handgun slides and frames) that were not previously possible as it eliminates galling and other friction and impact related issues inherent to titanium.

Through extensive testing with ArmorTi™ treated titanium components, Krytos has shown that many handgun slides can be replaced with one made completely of titanium to reduce the overall weight of the handgun by 25%, or more, while maintaining its performance. With titanium weighing roughly 45% less than steel, the felt weight reduction is dramatic. For example, a factory Glock 19 (Gen 3) slide weighs 11.5 ounces while Krytos’s G19 slide weighs in at a mere 6.4 ounces. Further, all participants involved in testing reported that the increase in felt recoil was negligible, but did state that sight recovery on target was dramatically faster (this was attributed to increased slide velocity and reduced slide mass resulting in less “muzzle dip” upon returning to battery).

The company’s first products to market, shipping now, are handgun slides for the Glock 17 and 19 (both offered with optional cuts for the Trijicon RMR®), titanium guide rods for the Glock 17 and 19, and bolt carriers for the AR-15 (.223/.556) and AR-10 (.308). All of Krytos’s titanium products are precision machined to exacting tolerances from solid billets of 6AL-4V, Grade 5 titanium and finished with their exclusive ArmorTi™ process for an extremely hard, black finish.

Krytos Ind. Launches Revolutionary Titanium Finish & Titanium Glock Slides
Krytos Ind. Launches Revolutionary Titanium Finish & Titanium Glock Slides

“This is an exciting time for our young company,” said the company’s President, Ben Cook. “We were overwhelmed by the reactions we received from attendees and our industry partners at the NRA Convention this year.

“ArmorTi has consistently amazed us with what it allows titanium to do and we truly believe it will change the face of material design considerations in the firearms industry and many others. ArmorTi was designed with aerospace and medical applications in mind, but since we are all firearms industry veterans, we couldn’t help but launch in this industry first. Using our team’s considerable industry experience, we have tested our products to extreme levels to ensure they live up to our standards, which are ridiculous.”

ArmorTi is a state-of-the-art process that involves a precisely-controlled, forced diffusion to harden titanium’s surface that results in a black finish with unparalleled durability, far surpassing anodizing and even PVD/DLC finishes on titanium. Through a diffusion process, ArmorTi only affects the surface layer of the titanium leaving its integrity and all of the most desirable properties of titanium intact at its core.

ArmorTi allows titanium to now be used for applications it was not previously suited for due to titanium’s tendency to gall (a form of wear caused by friction welding between sliding surfaces) when sliding against another surface. ArmorTi completely eliminates any friction-related issues with titanium and dramatically improves titanium’s impact resistance while maintaining all of its most desirable properties.

Krytos Titanium Finish & Titanium Glock Slides
Krytos Titanium Finish & Titanium Glock Slides

While the process itself is extremely different, aesthetically, ArmorTi produces a familiar black finish like those found on most modern polymer handgun slides.

Krytos’s titanium products available now are:

  • Glock 19 Ti Slide – $549.99
  • Glock 19 Ti Slide w/RMR cut – $599.99
  • Glock 19 Ti Guide Rod – $59.99
  • Glock 17 Ti Slide – $549.00
  • Glock 17 Ti Slide w/RMR cut – $599.99
  • Glock 17 Ti Guide Rod – $59.99
  • AR-15 Ti Bolt Carrier (5.56/.223) – $369.99
  • AR-10 Ti Bolt Carrier (.308) – $429.99

To learn more about Krytos titanium products click here.

About Krytos Industries

Krytos Industries’ titanium finish, ArmorTi, is an advanced, temperature-controlled diffusion process that optimizes the heat treatment of titanium alloys used in applications producing high-friction and impact. ArmorTi’s patented process allows titanium to be utilized in applications not possible with untreated titanium and dramatically outperforms other treatments currently available for titanium while providing an aesthetically pleasing black finish. In the firearms industry, Krytos offers a number of aftermarket components, like handgun slides and AR-15 bolt carriers, that dramatically reduce a firearm’s weight while maintaining or improving its overall performance. www.krytosindustries.com

4
Leave a Reply

Please Login to comment
4 Comment threads
0 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
4 Comment authors
JamesVanns40American PatriotAnil Bhatia Recent comment authors
  Subscribe  
Notify of
James
Guest
James

People whining about the $550 price, when folks are spending $350 for cuts on their slides plus another $150 for refinishing to end up with something considerably less useful. You all understand the whole “John Wick” package is $1,500 right? and they at backed up with orders. It’s like people going to a Porsche website and complaining that they can buy two Honda Accords for that 🙂

Vanns40
Guest
Vanns40

I am but a simple gun carrier. For the price of one of these slides I can just about have a new Glock or, definitely, a used one, which is also fine with me. Others, who may be able to put the exclusiveness and utility of these to good use, may find them a worthwhile investment. My use will remain for a gun fight I pray will never occur.

American Patriot
Guest
American Patriot

When a slide costs more than the complete gun? I guess if you have more money than brains, but why would you want a lighter gun? A G19 is already pretty light do you want more felt recoil & more wear on the parts slamming harder during the cycling not to mention the poly frame………Pass.

Anil Bhatia
Guest
Anil Bhatia

Looks awesome, price seems a little too high though , send some experts your slides for expert reviews and 1 for me 2
All the best !!