Taurus GX4 Handgun a New Sub-Compact 9mm for Concealed Carry ~ VIDEO

AmmoLand Editor, Jim Grant, gets his hands on an exclusive early look at the all-new Taurus GX4 handgun.

U.S.A. -(AmmoLand.com)- Before the Taurus GX4, I had never owned a Taurus pistol in my entire life. If you’re wondering why it’s probably not what you think. When I first got into shooting, the gunshops around me either didn’t carry Taurus or priced them at or above guns from companies with objectively better track records for reliability. Now given, this was nearly 15 years ago, and the Taurus of the mid-2000s was plagued with quality control issues.

GX4 Action01
The new Taurus sub-compact pistol was quick-shooting and had mild recoil. IMG Jim Grant

I mention this not to scare off potential buyers, but rather to give perspective on both the negativity surrounding older Taurus guns on the internet, as well as the progress made under its new CEO – Bret Vorhees. Under Vorhees, Taurus has really improved its image by producing more modern firearms at affordable prices, and by doubling down on quality assurance to make sure that customers never need to take advantage of the lifetime warranty behind the guns.

Taurus GX4 01
The new Taurus GX4 is easy to conceal and features excellent ergonomics. IMG Jim Grant

Taurus GX4 Pistol in 9mm

Manufactured in Brazil, the new Taurus GX4 is a striker-fired, polymer-framed locked-breech semi-automatic handgun chambered in 9mm parabellum. It feeds from steel, stagger-column 11-round flush-fitting magazines and includes two in the box. One interesting aspect of the magazines’ design, is the extreme angle of the tapered portion of the magazine’s body at the top. Presumably, this was done to allow for a smaller slide without compromising the GX4’s magazine capacity. Despite this relatively steep angle, the follower never felt like it dragged, even when loaded to capacity.

GX4 Green
The new Taurus pistol is compact, lightweight, and reliable. What more could you ask? IMG Jim Grant

As mentioned above, the Gx4 features a polymer frame to reduce overall weight. In fact, the GX4 only weighs 18.5oz unloaded. Additionally, the frame and slide are both dehorned for easier, cleaner draws from concealment, while the frame features selected areas covered in a molded stippling texture to ensure shooters retain control of the pistol when it’s wet or oily.

The frame also has a low profile magazine release button and slide release to prevent snagging on clothing or holsters. This also makes the gun slide into a holster easier.

Below this, the GX4 features a flat-faced trigger with a safety blade in the center not totally dissimilar to those found on a Glock.

Taurus GX4 Ergonomics

GX4 Grip
The GX4 features molded stippling on the frame to give shooters better purchase on the handgun during recoil. IMG Jim Grant

All controls on the Taurus GX4 are easy to reach for shooters of all sizes, and in testing, even my 100-pound wife who wears a size small glove can reach everything without having to shift her firing grip. This is partially due to the overall compact size of the gun, but also the channel at the top of the grip which reduces the length of pull of the pistol.

The trigger itself is very competent, but not terribly light; after all, it is a concealed carry gun that lacks a manual safety. Using a Lyman trigger scale, 25 trigger pulls averaged out to 7.3lbs. Some pulls measured as little as 6.4lbs, others as high at 8lbs. But this was due to trigger finger placement, and not to an inherent design flaw.

GX4 Trigger
The Taurus GX4 features a trigger blade safety instead of a manual one. IMG Jim Grant

Another ergonomic concern for me on the GX4 and this applies to all compact concealed carry handguns, is the bore axis of the pistol. Basically, if the barrel is too high above the grip, it gives mechanical advantage and leverage to the recoil impulse against the shooter’s grip. This in turn translates to additional felt recoil. Thankfully, the GX4’s bore axis is fairly low, which helps tame the sometimes snappy recoil of 9mm ammo when fired from a compact, lightweight handgun. This is great because even though the Taurus is roughly the size of a .38 special J-Frame revolver, it has dramatically less felt recoil and more than double the capacity (Plus faster reloads.).

Reloads with the Taurus GX4 pistol were also pretty quick. So while the gun lacks a beveled magazine well, the sharp angle of the magazine bodies helps funnel the magazines into the mag-well.

Accuracy

GX4 Rear Sight
The GX4’s rear sight is a steel black notch with anti-glare serrations. IMG Jim Grant

Although the GX4 only has a 3.06-inch barrel, the pistol proved surprisingly accurate – even with 115gr inexpensive FMJ. While I personally didn’t have enough time to do a scientific, in-depth accuracy test, the Taurus handgun never struggled to hit any targets on my range. This even includes a 12-inch steel gong at 60 yards. Though the pistol’s somewhat snappy recoil did make hammered pairs very difficult beyond 10 yards on small targets.

GX4 Front Sight
Like the rear sight, the pistol’s front sight is also made of steel. Unlike the rear sight though, it features a much more visible white dot in the center for faster sight acquisition. IMG Jim Grant

That said, man-sized targets (it is a concealed-carry pistol after all) proved no challenge even when firing the Taurus GX4 pistol as quickly as possible at 10 yards. And I suspect the fairly heavy break on the trigger contributed more to any difficulties I had quickly shooting than any mechanical limitation. Plus, after a few hundred rounds of break-in, the trigger should improve substantially.

GX4 Reliability

Due to my abridged time with the gun, and the insane price of ammunition lately, I only put 350 rounds of ammo through the GX4. 150 of these rounds were 115gr Winchester White Box FMJ.

GX4 Action02
During the course of the review, the GX4 encountered no malfunctions whatsoever. IMG Jim Grant

Additionally, 100 rounds of 124gr FMJ from Aguila was test-fired through it, as well as a mix of 135gr +P Critical Duty JHP from Hornady, 124gr HydraShok JHP from Federal and a few 147gr JHP from Browning ammunition. In all this testing, the gun never encountered any malfunctions whatsoever. It was exactly as reliable as any high-quality concealed carry pistol should be. Overall, the gun was utterly dependable.

Under the GX4’s Hood

GX4 Take Down
To disassemble the Taurus GX4, the only tool needed is a 9mm casing or cartridge. IMG Jim Grant

The Taurus GX4 utilizes a simple locking lug and a double, captured recoil spring for operation. Disassembly for cleaning is simple and straightforward. A shooter simply removes the magazine, then clears the action of any cartridges, before turning a disassembly lever with either a flathead screwdriver or the rim of a 9mm cartridge. Once the lever is rotated 90 degrees counter-clockwise, the slide must be gently pressed forward, and then the trigger pulled to release it from the frame.

After that, to free the recoil spring from the slide assembly, just push it towards the muzzle to relieve tension before lifting the rear up and away. The barrel comes apart much in the same way. Just slide it forward slightly to unlock it from the slide, then lift it vertically and backward away from the muzzle to remove it.

To reassemble, do the previous steps in reverse, with one exception – the takedown lever does not need to be rotated. It will rotate by itself once the slide is re-installed on the frame.

Is the Taurus GX4 Worth It?

With a strangely specific MSRP of $392.42, the GX4 is by no means an expensive handgun – especially when compared to its peers.

Buy Now Gun Deals

But there are a few options I would have personally liked to see included that were absent on this original gun. For starters, I would have preferred a more visible front sight post. Ideally a tritium-filled one. Though that would undoubtedly raise the MSRP substantially.

The other gripe I have with the gun is its lack of an extended magazine or possibly an extended baseplate. That said, with the stock magazines installed, the gun is still very comfortable for me – though caveat emptor – I have smaller hands. So if you’re well over six feet tall, the gun may be a little small for you. Thankfully, it does include an enlarged backstrap to help fill the hands of larger shooters.

GX4 03
The Taurus GX4 on a piece of iron ore. Because, why not? IMG Jim Grant

Taurus GX4 Verdict

Compact, easy-shooting, and featuring a very solid magazine capacity, the new Taurus GX4 is an excellent handgun for concealed carry. Some may scoff at the prospect of buying a handgun not made by one of the big defense companies, but rest assured, is my example is any indication, the Taurus GX4 is a reliable performer, and one that I personally wouldn’t feel under-armed carrying.


About Jim Grant

Jim is one of the elite editors for AmmoLand.com, who in addition to his mastery of prose, can wield a camera with expert finesse. He loves anything and everything guns but holds firearms from the Cold War in a special place in his heart.

When he’s not reviewing guns or shooting for fun and competition, Jim can be found hiking and hunting with his wife Kimberly, and their dog Peanut in the South Carolina low country.

Jim Grant

Subscribe
Notify of
15 Comments
Inline Feedbacks
View all comments
alan93
alan93
21 days ago

I got the G2C after taurus replaced my millenium in a recall. Love it, the trigger pull, the grip and 13 rnd capacity. Before that had a 24/7 pro .40. love that too.

Billcase
Billcase
5 months ago

Made in USA .. not Brazil
6 other reviews.. trigger from 5# to 5.5 #

Really stopped watching your review…
mis information

PMinFl
PMinFl
5 months ago

Already for sale for $401.69 at KYguns.

JIAZ
JIAZ
5 months ago

“MSRP $392.42”

If I can pick one up for $300.00 or less I’ll give it a try. If it runs well it’ll be assigned backup duty in my backpack/camp/outdoor trek gear.

“Some may scoff at the prospect of buying a handgun not made by one of the big defense companies.”

I won’t “scoff”, but on my personal 4 O’clock, I’ll stick with “one of the big defense companies”.;)

Dangerous Dave
Dangerous Dave
5 months ago

I have no doubt it’s a very nice pistol. But I picked up my P365 for not much more money than that on sale. It weighs less, holds more, and comes stock with tritium front and rear, and a rail. Putting a decent set of sights on this Taurus will easily put the price over that of the Sig, or the Hellcat for that matter. With the sights on this Taurus, you damn sure can’t shoot it in the dark, and adding light or laser is not an option. I won’t even bring up the horrendous customer service (or lack… Read more »

Last edited 5 months ago by Dangerous Dave
Xaun Loc
Xaun Loc
5 months ago
Reply to  Dangerous Dave

Clearly you bought your P365 in 2019 or before — and obviously have not looked at the prices at the few dealers that actually have one in 2021.

willyd
willyd
5 months ago

Taurus is the parent Company of Heritage which makes a fun plinking revolver, but trying to get any service or answers to questions takes an act of congress to get any answers, thus I’m not sure if I want to test the waters of Taurus, just my thoughts! I’ve had much better luck working with Ruger!

HikerJohn316
HikerJohn316
5 months ago

Looks like a good solid pistol. The reliability and low price of Taurus pistols meet the need for those wanting a sub-compact at a more affordable price than the other makes.

Boom
Boom
5 months ago

What a comprehensive review… New & fresh too. I don’t think Ive seen any others.

Montana454Casull
5 months ago

Go big or go home , Tauras Raging bull 454 Casull . Just not a 9mm fan or a striker fired plastic pistol guy ! Bigger is better in my world .