Witt Machine & Tool Announces an Adjustable, Two Piece, Gas Block ~ VIDEO

In typical Witt Machine fashion they break ground with the announcement of an Adjustable, Two Piece, Gas Block.

Witt Machine Two Piece, Low Profile Adjustable Gas Block
Witt Machine Two Piece, Low Profile Adjustable Gas Block : http://goo.gl/XSXV9Q

Witt Machine

USA-(Ammoland.com)- What? A Stainless Steel, TWO Piece, Low Profile Adjustable Gas Block. In typical Witt Machine fashion – there are a few things about this new product that stand out.

Driven by necessity because what was needed could not be found in the marketplace.

Witt Machine makes a true Integrally Suppressed AR Upper in .300BO, 5.56NATO, and .308 Calibers and as they installed two piece gas blocks into the system they discovered there was currently NO front adjusting two piece gas blocks on the market.

Therefore the challenge was thrown down and it became necessary to BUILD one.

Why? Who Needs Witt Machine & Tool’s Adjustable Two Piece Gas Block?

The answer lies in the fact that Witt Machine Integrally Suppressed AR Upper’s need a two piece gas block because of the titanium suppression system goes over the full length of the barrel in front of the gas block. Witt Machine individually builds directly over a full 16” rifle barrel on the Integrally Suppressed AR barrels and it has to be done first before a gas block is installed.

Hence the required two piece part of gas block. Then the next step was realizing that most adjustable gas blocks adjust from the rear. In this case the rear is butted up against the suppression system and not available. So, not finding an applicable gasblock, necessity dictated, Witt Machine built it!

Front Mounted Gas Block Unintended Consequences ….

So sometimes unexpected things happen. Here is what was quickly realized and was an added bonus of having a Two Piece, Stainless Steel, Adjustable Gas Block.

It adjusts from the front… obviously this is a perfect design for the integrally suppressed AR systems, Witt Machine builds, because the suppression system is behind the gas block and does not allow room for adjustment anyway. The hand guard must come off no matter. This Two Piece Front Adjusting Gas Block is now great for all the nanny, illogical, semi-communist States who require pinned or welded muzzle devices (read New Jersey) and for anyone who runs a 14.7” barrel with a pinned muzzle device; that makes this a “Compliant” friendly gas block.

Just perfect for those who need a new gas block or desire an adjustable gas block for fine tuning precision ammo loads. As a Low Profile Gas Block it also fits very well under any handguard with 1.35” or greater inside diameter. Lastly, all those Short Barreled Rifles who have been Stamp branded and have a desire to shoot suppressed and unsuppressed now have a great and affordable option for making that a smoother transition. So the unintended Consequences are all positive so far.

Witt Machine & Tool’s Adjustable Two Piece Gas Block, What and Where…

The Witt Machine & Tool’s Adjustable Two Piece Low Profile Gas Block is made from 416 Stainless Steel and will come in a choice of Polished Stainless Steel or Black Oxide for an affordable $79 MSRP.
The Witt Machine & Tool’s Adjustable Two Piece Low Profile Gas Block is made from 416 Stainless Steel and will come in a choice of Polished Stainless Steel or Black Oxide for an affordable $79 MSRP. : http://goo.gl/XSXV9Q

The Witt Machine & Tool’s Adjustable Two Piece Low Profile Gas Block is made from 416 Stainless Steel and will come in a choice of Polished Stainless Steel or Black Oxide for an affordable $79 MSRP. The gas block is a Front Adjusting gas block using a purpose driven design that currently makes it a One-of-a-Kind product and first to market. It will fit inside ANY handguard that has a 1.35” inside diameter or greater. Those that need this will instantly see the value of what it offers and know it is an answer.

Distributors and Dealers WANTED…

Integrally Suppressed 16" .300 Blackout AR Upper $1,499.00
Integrally Suppressed 16″ .300 Blackout AR Upper $1,499.00 : http://goo.gl/kPSwht

CALL your order in if you want it pronto: 719.298.2031

Be sure and check out the Integrally Suppressed AR Uppers and Titanium Suppressors while you are there too… (DEALERS Still wanted for NFA items too) Email: [email protected]

About Witt Machine:

A creative Veteran Owned Machine Shop, Witt Machine & Tool first came to be by bringing an idea for a really good clamp on muzzle brake to life.

No one had ever heard of a CNC Machine being ran off grid from a propane generator until a former Marine made it happen in his startup phase and grew his business into to a 24/7 Machine Shop and had to move down from the mountain he was on so employees could make it to work.

Witt Machine has used creative and unique designs for effectively reducing recoil by 62% or more using their brake and compensator designs. That is a core product that put them on the map. Then they built a Suppressed M1919A4 because they were told it wasn’t possible, then they started making Titanium Direct Thread on Suppressors using a new Patent Pending baffle system that makes them very quiet, which immediately followed with a successful design for a True Integrally Suppressed AR system in several calibers. Witt Machine has more creative ideas and things to come so keep an eye out for them and know they are one to watch. www.WittMachine.net

2 Comments
Inline Feedbacks
View all comments
Sam
Sam
5 years ago

Is this a tax stamp upper ?

marc disabled vet
marc disabled vet
5 years ago

BAD ASS !!!