Why an Aimpoint Red Dot Sight?

Why an Aimpoint Red Dot Sight?

Aimpoint
Aimpoint

Chantilly, VA –-(AmmoLand.com)- The Aimpoint Philosophy When the time comes to shoot, there should be absolutely no question that you can count on your sight to perform.

We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness. We know that conditions in the field place extreme demands on your equipment, so we design and test Aimpoint products to stand up to any conditions you are likely to encounter.

We also design our products to operate constantly for years on a single battery so your sight will always be ready whenever you need it.

Why a Red Dot Sight?
To be successful, shooters must be able to aim accurately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most experienced marksman will be put to the test.

Red dot sights are superior to iron sights and magnifying scopes in several ways. Using these other types of aiming devices require that the shooter’s focus leaves the target. With iron sights, shooters must align the rear and front sights with the target. Magnified scopes slow you down. Your field of vision is severely limited, and locating your target through a tube with one eye closed wastes valuable time and destroys your situational awareness.

The single red dot has been proven to be the fastest type of reticule to place on target, and provides the greatest increase in hit probability on moving targets. Red dot sights allow you to remain focused on the target. Shooting with both eyes open means that you remain in touch with what is going on around you, and will never again miss an important shot because your scope was on the wrong magnification!

Why an Aimpoint Red Dot Sight?
Place the dot on your target – from any angle Aimpoint sights are parallax-free, which means that the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. This means you never have to worry about centering the dot inside the sight. When the dot is on target, so are you. You will be able to get on target fast, and can forget about being challenged by bad light or moving targets.

All conditions – Anywhere
Aimpoint sights work in all light conditions from the darkness of the forest before dawn to bright mountain sunlight. They are fully submersible so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero temperatures of the Arctic to the heat and humidity of the tropics.

On any type of firearm

Whether you have a rifle, shotgun, handgun, black powder rifle or bow, Aimpoint has a sight for you.

Standard features on all Aimpoint sights

  • Unlimited field of view
  • Parallax-free and unlimited eye relief
  • Unaffected by extreme weather conditions
  • Extremely rugged, durable construction
  • No hazardous materials
  • No laser emission that could be harmful to your eyes
  • Increased aiming confidence and hit probability
  • Reduced training time and ammunition consumption
  • Battery life measured in years

User friendliness
Aimpoint sights are extremely user friendly. Operated by a mechanical switch or push-buttons, an Aimpoint sight can be easily and quickly changed to the right setting while simultaneously aiming through your sight. Our mechanical switch and push buttons won’t freeze and are easy to use whether you are wearing gloves or not.

Environmental awareness
At Aimpoint, we take great pride in making sure that neither hazardous nor radioactive materials are used in our sights.

Quality
Aimpoint sights are manufactured in accordance with ISO 9001:2008 and meet the highest standards of quality. Each sight is hand-built at our state of the art facilities in Sweden, assigned an individual identification number, and subjected to rigorous testing and numerous quality control checks during the manufacturing process.

Aimpoint’s Advanced Circuit Efficiency Technology
We pioneered the development of the red-dot sight in 1975, so every Aimpoint sight has over 35 years of advanced Electro-optical science built in. Aimpoint’s new Advanced Circuit Efficiency Technology combines our superior accuracy and ease of use with significantly lower power usage to maximize battery life.

ACET sights can last up to 50,000 hours (over 5 years on setting 7 out of 10) of constant use from a single battery. That is 49,000 hours more than other competitive sights on the same setting.

Aimpoint has taken another giant step forward by applying its scientific expertise in developing the new Hunter series sights. The Hunter sights offer full length product performance with features like 34mm tubes and digital brightness adjustments. Place the dot on the target, squeeze the trigger, and your job is done. Add an Aimpoint Hunter sight to your favorite firearm and put our science to the test. We’re ready when you are.

Aimpoint – Global leader
Aimpoint is the recognized worldwide leader and originator of red dot sighting technology. After 35 years of working closely with experienced marksmen and military weapon experts around the world, Aimpoint red dot sights remain the number one choice for combining ruggedness, speed and accuracy. Aimpoint sights are in service with the US Army, the US Air Force, the US Navy, US Marine Corps, and numerous other military forces, police agencies, and special teams worldwide. Soldier tested & combat. Visit: www.aimpoint.com

0 0 votes
Article Rating
1 Comment
Inline Feedbacks
View all comments
John

1.What kind of warranty? What Red Dot would you recommend that I use on my SOCOM 16 by Springfield Armory?