JSD Supply Returns To Gun Shows, Plans to Sell So-Called 80% “Ghost Guns”

JSD Supply Returns To Gun Shows, Plans to Sell So-Called 80% “Ghost Guns”

HARRISBURG, PENN-(Ammoland.com)- JSD Supply will be once again selling unfinished frames at Eagle Arms Production gun shows in Pennsylvania.

Eagle Arms Production banned JSD Supply from selling unfinished frame kits such as those made by Polymer80 #ad at their shows earlier this week. The gun show’s production company claimed in statements to various outlets that no one pressured the company to ban the sale of the unfinished frame kits or unfinished lower receivers. Our inside sources said there was pressure from Representatives such as Amen Brown of Philadelphia for the show to stop the sale of these items.

PA Attorney General Josh Shapiro jumped-the-gun bragging at his recent press conference, as 80% kits are now back on sale. So much for that fake-news “win”.

After the announcement of the ban, rabid anti-gun Attorney General Josh Shapiro held a press conference where he gloated about the outcome. Anti-gun groups immediately started thinking about how they can use the decision to pressure other gun shows across the country to stop the sale of the kits. Other anti-gun groups spun the decision as the gun community admitting there is a problem with unserialized firearms.

Under the new agreement, JSD Supply will be allowed to sell unfinished frames and kits at all Eagle Arms shows in the Key Stone State. JSD Supply agreed to have the buyers sign a form stating that they are over 18, not a felon, and will not bring the kits back to anywhere that unfinished frames are illegal.

The sheet is half a page long and will list similar terms and conditions that Polymer80 lists on their website. The customer will not have to present an ID or give personal information. There is not a requirement for JSD Supply to keep the records.

JSD Supply has a history of refusing to turn over customer information to the state. The Attorney General did request JSD Supply to turn over some customer records to him. The company declined to comply with the request without a subpoena. Inside sources say this enraged the AG and is one reason there was a move to push Eagle Arms to ban the company.

JSD Supply sent out a press release where the company owner, Jordan Vinroe, credits AmmoLand News. He thanked AmmoLand for our investigation into the situation and our factual reporting that allowed all sides of the issue to make statements. Along with AmmoLand, JSD thanked Gun Owners of America and named State Director Val Finnell for mobilizing GOA’s base to push back against the AG and others.

JSD Supply Returns To Gun Shows, Plans to Sell So-Called 80% Guns

The company owner also thanked Hank Strange for allowing him on Strange’s show with less than five hours’ notice. He called Strange a patriot who values American rights. On Lifestyles of The Locked and Loaded, Vinroe answered questions to talk about the struggles of being in the crosshairs of anti-gun politicians.

Other people and groups Vinroe thanked were the Firearms Policy Coalition, Guns & Gadgets, and Rob Pincus for shedding light on the issue.

He went on to thank Eagle Arms Productions for keeping the lines of communication open. JSD Supply is moving forward with selling unfinished frame kits at Eagle Arms Production shows and will be returning in two weeks.

Pennsylvania Attorney General Josh Shapiro did not return AmmoLand News’ request for comment on his now embarrassing press conference and the pro-freedom turn of events.


About John Crump

John is a NRA instructor and a constitutional activist. John has written about firearms, interviewed people of all walks of life, and on the Constitution. John lives in Northern Virginia with his wife and sons and can be followed on Twitter at @crumpyss, or at www.crumpy.com.

John Crump

7 Comments
Inline Feedbacks
View all comments
SGT_Wombat
SGT_Wombat(@wbielins)
8 months ago

Ha Ha Ha Ha Ha

Phil in TX
Phil in TX(@phil-in-tx)
8 months ago

Thank God there are some that will not comply!

Phil in TX

Stag
Stag(@eriggle83)
8 months ago

Good!

CourageousLion
CourageousLion(@wizardkiller)
8 months ago

I think that every gun owner should buy at least one P80 kit and one AR 80% lower and build two freedom pill launchers with them. I KNOW I’m on the communist assholes list.

Ryben Flynn
Ryben Flynn
8 months ago
Reply to  CourageousLion

5 of my ARs were built with 80% lowers, 1 polymer and 4 aluminum. My AR10 is a Polymer80 lower. The only lower that has a serial number is my 300BLK pistol which has an Anderson lower that was on sale at my LGS. At the time it was quicker to buy one than take the time to machine another aluminum 80% lower, which I still have.

HLB
HLB(@hlb482gmail-com)
8 months ago
Reply to  Ryben Flynn

What do you have to say about the quality and functionality of the polymer lowers? The plastic does have to handle the recoil of the weapon without deformation. Maybe this is fine with the 5.56×45 but what about higher powered versions? How does your AR10 do with them? I have never had one.
Thanks,
HLB

Commiefornia Sucks
Commiefornia Sucks(@commiefornia)
8 months ago

Maybe my email helped. Immediately after reading last week that eagle arms banned JSD from selling their products i emailed eagle arms and told them i’d never attend another one of their gun shows and would encourage everyone i know to do the same. Power of the pen and strength in numbers!!!

Last edited 8 months ago by Commiefornia Sucks