Bond Arms Snake Slayer Pistol ~ Gun Review & Range Test

The Clarys give us their thoughts on the Bond Arms Snake Slayer Pistol, including shooting it with some SIG Sauer Elite Performance Ammo.

The Bond Arms Snake Slayer is chambered for .45 Colt (sometimes referred to as the .45 Long Colt) and .410 shot shell.
The Bond Arms Snake Slayer is chambered for .45 Colt (sometimes referred to as the .45 Long Colt) and .410 shot shell.

We are obviously not talking about James Bond’s Walther PPK, but Gordon Bond’s “Hand Cannon” that has more power and stopping power than the former.

That being said, we want to point out that even though the Bond gun would be classified as a derringer by some folks, we also prefer the name “Hand Cannon”. The Bond Arms Snake Slayer is chambered for .45 Colt (sometimes referred to as the .45 Long Colt) and .410 shot shell.

Bond Arms Snake Slayer Pistol

The Bond frame is machined from a solid block of high-grade stainless steel, unlike the really cheap double-barrel pistols on the market, whose frames are made from alloys of unknown origin. Secondly, the Bond Bond Arms Snake Slayer is unique in that the barrels are interchangeable. You have a choice of 36 different barrels and 14 different calibers.

You read correctly, one frame and you can fit barrels with 14 different calibers to it, depending upon your circumstances, the conditions that you will use the gun and your personal preferences. That characteristic, in and of itself, is enough for most folks to consider buying this pistol.

the Bond Arms Snake Slayer s unique in that the barrels are interchangeable. You have a choice of 36 different barrels and 14 different calibers.
The Bond Arms Snake Slayer is unique in that the barrels are interchangeable.

The Bond Arms Snake Slayer pistol is CAD-designed for optimum configuration. However, more importantly, the frames and barrels are machined using Computer Numerically Controlled (CNC) equipment. This allows them to maintain tolerances of 0.001 of an inch. That is what allows the Bond Arms Snake Slayer pistol to accept different barrels for various cartridges without custom-fitting by a gunsmith. Changing barrels requires only a 1/8″ Allen wrench. The patented locking lever (which is also the rapid reloading lever) precisely locks the barrel to the frame for a perfect fit. To our knowledge, this is the only derringer on the market with the capability of changing barrels and calibers without a gunsmith being involved.

They added a lot of extra features to this gun, not found on other pocket pistols. For example, there is a stainless steel crossbolt safety, a hammer that rebounds to a blocked position off of the firing pin, and a key entry internal Safety Locking Device (SLD) which is an effective child safety device.

You don’t incorporate these features into a firearm unless your aim is to produce the best on the market. And, in our opinion, Bond Arms has succeeded in that goal.

There are even more features. The chambers are honed to provide for a smooth extraction of spent cases, and for rimless cartridges such as the 9mm Luger and .45 ACP, there is a cutout at the breech end of the barrel to permit their removal with a fingernail.

And, before we forget, the trigger guard is removable for those who want a more “conventional” look. We prefer the guard as it makes it easier to hold and fire the gun with both hands.

The only major questions that remain are: How does the Bond Arms Snake Slayer shoot & is the recoil manageable?

With that in mind, we headed to the Zia Rifle and Pistol Club outside of Albuquerque, New Mexico, with several boxes of SIG SAUER Elite Ammunition. SIG was kind enough to provide us with both .45 Colt and .38 Spl. (our second barrel) for our tests. We are appreciative of that, because if you are going to test a firearm for accuracy, you do not want to use anything except high-quality ammunition. Our previous tests of the SIG Elite Ammunition confirmed that it is as good as it gets.

We set our targets up at 15 yards. Given the short barrel of the Snake Slayer, it is unlikely that we would ever need to shoot it at more than 15 yards. We used the Caldwell Tack Driver Shooting Rest for stability. Our targets were Hoppe’s Bullseye Pistol Targets. We fired multiple five shot groups for record.

SIG Sauer Elite Performance .45 Colt, 230 grain V-Crown @ 850 fps (JHP) at 15 yards:

  • Smallest group: 1.75″
  • Largest group: 4.25″
  • Mean average group size: 2.25″

SIG Sauer Elite Performance .38 Spl., 125 grain V-Crown @ 965 fps (JHP) at 15 yards:

  • Smallest group: 1.50″
  • Largest group: 3.75″
  • Mean average group size: 2.00″

In case you are wondering, We were not the ones who shot for accuracy. We enlisted the assistance of Dr. Donny MacDougall, DVM, who is a champion shooter in the CMSA venues. We determined that if there was anyone who could “do justice” to the accuracy potential of the Snake Slayer, it would be Dr. Donny. And, we were right. As you can see from the results above, the Bond Arms Snake Slayer is a pretty good shooting little gun. The recoil from the .45 Long Colt is quite stout. It is definitely not a caliber that you would want to shoot for fun in a pocket pistol. However, changing to the .38 Spl barrel, the Bond Arms Snake Slayer became a fun gun to shoot (and lethal). It is not a target pistol, but still capable of respectable groups.

Dr. Donny MacDougall
Dr. Donny MacDougall

The Snake Slayer has a pretty “heavy” trigger, averaging 6 lbs. You can blame that on the litigious liberals out there who will sue firearms companies at the “drop of a hat“. Companies who put out guns with “light” triggers are their favorite targets.

Bond Arms suggests the following as the preferred manner to fire their guns and remain on target:

  • With the hammer in the full cock position, grasp the grip with your shooting hand making sure that your hand is not touching the cocked hammer. Any amount of pressure applied to the cocked hammer by your hand will increase the trigger pull substantially.
  • Make contact with the trigger using the pad of your trigger finger. Avoid pulling the trigger with the bend of your first knuckle.
  • Pull the trigger down, instead of straight back. That solves the “heavy trigger problem” for most folks (including us).

All in all, this is a very nice gun for concealed carry. That being said, one still needs to consider a holster that will fit this uniquely designed piece. We bought each of the following Bond holsters:

“In the Waistband Holster, #BAJ: This holster comes with a stout metal belt clip and is made for concealed carry in the small of your back, cross draw or with a strong hand presentation.”

Bond Arms Snake Slayer shown in the Waistband Holster, #BAJ
Bond Arms Snake Slayer shown in the Waistband Holster, #BAJ

Western Holster, #BWB: This is the Bond premium leather Western Holster. It comes with a hammer spur strap and belt loops for belts up to 1 1/2″ width and two bullet loops for either .357/.38 or .45/.410.”

Bond Arms Snake Slayer in a Western Holster, #BWB
Bond Arms Snake Slayer in a Western Holster, #BWB

These holsters are made in Texas from high-quality leather materials. The BAJ costs $62, while the BWB runs $73. not cheap, but quality rarely is.

The specifications of the Bond Arms Snake Slayer are:

  • Calibers: .45 Long Colt / .410 or .38 Spl. / .357 Magnum
  • Overall length: 5.5″
  • Barrel length: 3.5″
  • Sights: Front blade & Fixed rear
  • Weight: 22 oz.
  • Grips: Extended Rosewood
  • Origin: Granbury, Texas

What you get with a Bond Arms Snake Slayer is a handmade firearm with a Lifetime Warranty. The MSRP of the Snake Slayer is $568. (less online) Given the fact that your initial Bond gun can be configured for multiple calibers and different barrel lengths, that is a good deal. However, a word of warning: After you buy one, you will definitely want to buy a second, or at least several additional barrels…. They Are That Good. In the following picture, Gordon Bond is holding what will be our next acquisition, the Bond Texan with a 6″ barrel in .45 Colt / .410 calibers.

Doc, Gordon Bond and Mary at the 2017 SHOT Show
Doc, Gordon Bond and Mary at the 2017 SHOT Show

Author’s note: Regular jacketed ammunition, FMJ or JHP, shot very well in the Snake Slayer. However, we DO NOT recommend shooting any of the new copper-polymer matrix bullets. Matrix bullets are too light (with too high a velocity) to stabilize in a short barreled derringer. They tumble and will “print” a keyhole on the target, if you manage to even hit it. While these bullets perform very well in most semi-automatic pistols and revolvers, they are just not good for derringers.

About Jim and Mary Clary:

Jim and Mary Clary have co-authored over three hundred and fifty articles (and counting) on shooting and hunting. You can read many of them on AmmoLand News.

Some of the links on this page are affiliate links, meaning at no additional cost to you, Ammoland will earn a commission if you click through and make a purchase.
Most Voted
Newest Oldest
Inline Feedbacks
View all comments

The matte finish has RUINED what used to be a beautiful gun. Glad I bought my Snake Slayer before they ruined the look.


Necessary if you’re cheatin’ at cards.


I’ve had mine for a few years now. I’ve fired it once. Stout? Yeah, I’d say it fires real stout. A little painful but I love this little pistol.


I want the gun mainly for self protection.I am having trouble deciding on a carry holster ?

pat kocsis

I have two of these finely made pieces. I ported the barrels on the 410 and have found that it has changed the dynamics of handling. The gun no longer kicks up but rather straight back. This allows for a very pleasant shooting experience with minimal loss of energy over the chrono. I have since ported all my barrels (9mm, 45acp, and .357).

Mike O'connell

Heard through the grapevine that someone has shot 4570 through the Snake Slayer ? I’ve had mine for 12 years and even took it to AK. Had some 410 Bear loads and they have a hell of a punch, but really recoil. Wonder if barrels interchange with the older models ? I will be in Texas this winter to visit an old buddy in Bluff Dale and I’ll stop over to Granbury for a visit. Really love my Slayer and have resolved many Snattrake issues (71/2-8 shot works well). Wish I’d had mine as a gunner in Vietnam. Fits great… Read more »


Mike, there’s a video with Mr. Bond saying not to shoot the 4570 load, that the gun is not made for such a powerful load. I shot some Hornady “leverution” through mine. They are only 460 foot pounds of energy, probably about a third of the power in the 4570, and it snapped back in a way that I didn’t think was good. I wouldn’t dare use anything over 600 fot pounds in it.


I love my Snake Slayer. BUT, I can’t hit the ocean with it. Took concealed carry class and scored 100 on the shooting portion, but I shot the instructors 1911. Next morning I’m shooting a 3′ x 3′ Target at 15 yards, and hit nothing. Someone please let me know what could be wrong her!? It’s the 45 Colt, and I’m using ultramax 188 foot pound bullets. Thank you in advance.


I understand for sure. With mine I put the bullseye on top of the sight( 6 o clock ) and have to be very careful not to pull off the target when I pull the trigger. The trigger pulls down easier than straight back. I hope this helps.


Jim, thank you for the response. I will give that a try next time I shoot. Although, I don’t fully understand the 6 o’clock positioning, the trigger pulling is something I can do. Are you saying the 6 o’clock position on the target, meaning the lower part of it? When I was shooting at vegetable cans at just 10 feet, every shot went well over the cans, albeit the shots were aligned with what would be dead center. I couldn’t adjust any lower, as it takes the can out of view. But then, backing up seems to, in the extra… Read more »


With mine if I’m not careful it would pull to the left of the target when I pulled the trigger. What I mean by 6 o clock is align the front sight flush with the top of the rear sight and put your target on top of them. I use paper targets with a bullseye and I can see the whole bullseye sitting on top of the sight rather than the middle of the bullseye on the top of the sight. In your case I would be aiming low on the can so I can see the middle of the… Read more »


I just watched a video on the Snake Slayer, demonstrating the way to pull the trigger, exactly as you stated. It’s been foul weather here, so I haven’t had the opportunity to shoot, but am anxious to try the new trigger pull and aiming. Thank you for such timely and considerate responses.

Monroe teems Sr.

I have the bond arms patriot in 45 lc and 410 I’ve had it almost a year and I love it no problem with trigger pull .it is an awesome hand cannon I have the crossdraw holster because when in the car my 9mm is hard to get to but the crossdraw or driving holster is perfect thanks Bond Arms great gun


I have a .410 hand cannon. It can take a car door off. The recoil will rub your hand raw. Switch out the barrel and use another caliber shot shells. Good stopping power. Even .22 LR shot shell can do some serious damage to an attacker.


The recoil with the 45lc and 3”410 ga. Is not that bad. I shot a whole box of 45 LC and 10 410 rounds and did not experience any discomfort

James knights

i have a Snake Slayer 4 and I am having problems with my wooden gripes cracking behind the hammer on both sides of the gripe with less than 50 rounds on each set of gripes. The original, then the jumbo rosewood and then back to the original style again. All three have cracked in the same place. Bond Arms tells me it doesn’t happen very much and have stood behind all of them. I like the original gripe but I don’t like the constant cracks coming back. I don’t like the looks of the rubber and don’t want to have… Read more »


regardless of appearance, i recommend to only use rubbber grips: large size for “4” calibers, small size for others. the most unpleasant calibers to shoot are 45acp and 357, regardless of grips. too bad because i really want to like 45acp. i have barrels in 410/45lc, 45lc, 45acp, 357/38, 9mm, 380acp, 22lr. i found some relatively cheap 45 schofield ammo online that is a resonably soft replacement for 45lc, which itself actually isn’t that bad. i recommend to only use handgun specific 410 ammo, long gun 410 ammo is unpleasant when shot out of a bond arms derringer. i especially… Read more »


I have the Bond Backup in caliber .45 ACP. Grip it as described above and the recoil is very manageable. Pay close attention to the trigger pull downwards; if pulled straight back — well, it won’t work. It’s not a muscle memory issue, because the entire hand grip is adapted to the unique form of the derringer.


When will you test the 6 inch BOND DERRINGER?

Pedro Hogue

I use my Snake Slayer for a CCW. It pocket-carries well in a soft Remora Holster. I bought a .38/.357 barrel for it, in 2016. I was disappointed in the first one, as the machining lacked a good finish quality, shot inaccurately, and stuck a few cases. I had very good customer service, and Bond’s girl quickly sent a replacement. That new barrel is everything I wanted! The trigger has been heavy since I got the gun about five years ago. Out practicing with the new barrel, the trigger became very difficult, just as Danny described. I went home and… Read more »

Jeff Polaski

Gordon Bond<

I have two .45 ACP Backups. The only thing lacking is a Laser Light or similar laser sighting device.

I will be first in line to buy one; other will be directly behind me.

Your reply, positive or negative would be courteously received.

Michael Velsmid

I called Bond Arms with the same question. They couldn’t tell me if any laser sights fit any of their Hand Cannons.
I would be the person lined up behind you to buy it. Perhaps we can find one at the Atlanta NRA show?

Craig Jenkins

Interesting gun can it be bought in Ca? I would be interested if it could

Peter Polk

They have two specific models that can be sold in CA.
The compliant barrel cannot be swapped, nor can it have the shot shell chambered.
Check their web site for details.

Steve K

I have an older Snake Slayer, which I LOVE! It has a beautiful polished finish. I wouldn’t buy one with the ugly finish they are now using.

Danny Koch

I had one of these bond snake slayers. It was clear it was well made.BUT the trigger was so stiff it was unusable at times. The one time I was faced with a rattler I was unable to fire it. We latter put it on a trigger gauge and the pull was more than the gauge could measure.. I sold it of and went back to carrying my S&W model 60 with cci birdshot for snakes. I would point out I spent 15 years as a police firearms instuctor and never seen a gun with this bad of a trigger… Read more »


If you have the opportunity to fire another Bond, or try one in a store, note that as stated in the article above that you do more of a pull-down with the trigger. It is a bit unusual but makes a huge difference in the felt pull weight.

Ed Brown

I’ve had mine for several years. While guiding WY antelope hunters in Oct, several rattle snakes didn’t survive. Great vehicle piece in horizontal cross draw holster. New ammo is far better than #6 shot!
Highest quality, great AMERICAN company.

Richard Newton

What ammo were you using for the snakes?


Can one safely do a “trigger job” on the Bond to improve trigger pull? Most of my triggers have been worked to get about 2lbs with no creep.

Michael Velsmid

I have no problem with the trigger pull. Maybe your finger is weak. Can be solved with some exercises.

Michael Velsmid

Do trigger finger push-ups. My 10 year old daughter can squeeze a 14 lb pull.